1 Scope
This standard stipulates the basic requirements and safe operation requirements for the transportation, loading and unloading of dangerous goods by automobile.
This standard applies to the transportation, loading and unloading of dangerous goods such as explosives, compressed gases and liquefied gases, flammable liquids, flammable solid spontaneous combustible articles and substances emitting flammable gases if wet, oxidants and organic peroxides, poisons and infectious substance, radioactive substances, corrosives and miscellaneous substance by automobile.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies.
GB 190 Packing symbol of dangerous goods
GB 4387 Safety regulation for railway and road transportation in plants of industrial enterprises
GB-2005 Classification and code of dangerous goods
GB 7258 Safety specifications for motor vehicles operating on roads
GB 8978 Integrated wastewater discharge standard
GB 11806 Regulations for the safe transport of radioactive material
GB 12268 List of dangerous goods
GB 13392 The vehicle mark for road transportation dangerous goods
JT 230 Rubber belt of electrostatic conductivity
JT 617-2004 The regulation of automobile transportation of dangerous goods
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General rules
5 Requirements for transportation, loading and unloading of packaged goods
6 Requirements on loading, unloading and transportation of bulk goods
7 Requirements on loading, unloading and transportation of containerized goods
8 Requirements on loading, unloading and transportation of common dangerous bulk goods
Annex A (Normative) Relationship between self-accelerating decomposition temperature, control temperature and emergency temperature
JT 618-2004, JT/T 618-2004, JTT 618-2004, JT618-2004, JT 618, JT618, JT/T618-2004, JT/T 618, JT/T618, JTT618-2004, JTT 618, JTT618
Introduction of JT 618-2004
1 Scope
This standard stipulates the basic requirements and safe operation requirements for the transportation, loading and unloading of dangerous goods by automobile.
This standard applies to the transportation, loading and unloading of dangerous goods such as explosives, compressed gases and liquefied gases, flammable liquids, flammable solid spontaneous combustible articles and substances emitting flammable gases if wet, oxidants and organic peroxides, poisons and infectious substance, radioactive substances, corrosives and miscellaneous substance by automobile.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition applies.
GB 190 Packing symbol of dangerous goods
GB 4387 Safety regulation for railway and road transportation in plants of industrial enterprises
GB-2005 Classification and code of dangerous goods
GB 7258 Safety specifications for motor vehicles operating on roads
GB 8978 Integrated wastewater discharge standard
GB 11806 Regulations for the safe transport of radioactive material
GB 12268 List of dangerous goods
GB 13392 The vehicle mark for road transportation dangerous goods
JT 230 Rubber belt of electrostatic conductivity
JT 617-2004 The regulation of automobile transportation of dangerous goods
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
Contents of JT 618-2004
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General rules
5 Requirements for transportation, loading and unloading of packaged goods
6 Requirements on loading, unloading and transportation of bulk goods
7 Requirements on loading, unloading and transportation of containerized goods
8 Requirements on loading, unloading and transportation of common dangerous bulk goods
Annex A (Normative) Relationship between self-accelerating decomposition temperature, control temperature and emergency temperature
