This standard specifies the product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of lavatory for sanitary fittings.
This standard is applicable to installations in washrooms, toilets, public facilities, etc., of the lavatory for sanitary fittings for hand washing and face washing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor
GB 6566-2001 Limits of radionuclides in building materials
GB/T 6952 Sanitary wares
GB 9962-1999 Laminated glass
GB/T 9963-1998 Tempered glass
GB/T 11942-1989 Colorimetric methods for color building materials
Foreword i 1 Scope 2 Normative references 3 Classification and labeling 4 Service conditions 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transportation and storage
1 Scope
This standard specifies the product classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of lavatory for sanitary fittings.
This standard is applicable to installations in washrooms, toilets, public facilities, etc., of the lavatory for sanitary fittings for hand washing and face washing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3854-1983 Test method for hardness of fiber reinforced plastics by means of a Barcol impressor
GB 6566-2001 Limits of radionuclides in building materials
GB/T 6952 Sanitary wares
GB 9962-1999 Laminated glass
GB/T 9963-1998 Tempered glass
GB/T 11942-1989 Colorimetric methods for color building materials
Contents of QB 2658-2004
Foreword i
1 Scope
2 Normative references
3 Classification and labeling
4 Service conditions
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
