HQB/T 1586.2-2010 ardware fitting of case and bag - Case travelling wheel
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, and marking, packaging, transportation and storage for case travelling wheels.
This standard is applicable to travelling wheels for cases and bags.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
QB/T 2002.1-1994 Hardware fitting of leather products - Specification of electroplated layer
QB/T 2917 Hardware fitting of case and bag - Test method for abrasion resistance of traveling wheel
QB/T 2918 Case and bag - Test method for impact resistance by means of falling weight
QB/T 3826 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS)
QB/T 3832 Evaluation of the corrosion test results of the metal deposits for the light industrial products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
case travelling wheel
travelling wheel, composed of a wheel and a wheel frame (including a wheel cover and a wheel seat), that can bear itself and the load carried by the travel case or bag when it is used, and enable the case or bag to move by dragging on the ground through the rolling action
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and definitions
4 Product classification
5 Requirements
6 Test method
7 Inspection rules
8 Marking, packaging, transportation and storage
HQB/T 1586.2-2010 ardware fitting of case and bag - Case travelling wheel
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, and marking, packaging, transportation and storage for case travelling wheels.
This standard is applicable to travelling wheels for cases and bags.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
QB/T 2002.1-1994 Hardware fitting of leather products - Specification of electroplated layer
QB/T 2917 Hardware fitting of case and bag - Test method for abrasion resistance of traveling wheel
QB/T 2918 Case and bag - Test method for impact resistance by means of falling weight
QB/T 3826 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS)
QB/T 3832 Evaluation of the corrosion test results of the metal deposits for the light industrial products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
case travelling wheel
travelling wheel, composed of a wheel and a wheel frame (including a wheel cover and a wheel seat), that can bear itself and the load carried by the travel case or bag when it is used, and enable the case or bag to move by dragging on the ground through the rolling action
Contents of QB/T 1586.2-2010
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and definitions
4 Product classification
5 Requirements
6 Test method
7 Inspection rules
8 Marking, packaging, transportation and storage
