1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, labelling, packaging, transportation and storage for travelling case and trolley bag (hard and soft).
This standard is applicable to various travelling cases and trolley bags with such functions as loading and carrying clothes and equipped with traveling wheel and pull rods.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 231.1 Metallic materials--Brinell hardness test--Part 1:Test method
GB/T2912.1 Textiles-Determination of Formaldehyde-Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 3920 Textiles-Tests for Colour Fastness-Colour Fastness to Rubbing
GB/T 17592 Textiles-Determination of the Banned Azo Colourants
GB 19340 Adhesives for Footwear and Base and Bag
GB/T 19941 Leather and fur-Chemical tests-Determination of formaldehyde content
GB/T 19942 Leather and Fur-Chemical Tests-Determination of Banned Azo Colourants
GB 20400 Leather and fur-Limit of Harmful Matter
GB 21550 The Restriction of Hazardous Materials in Polyvinyl Chloride Artificial Leather
GB/T 22889 Leather-Physical and mechanical tests-Determination of surface coating thickness
QB/T 1586.1 Hardware Fitting of Case and bag-Case-lock
QB/T 1586.2 Hardware Fitting of Case and bag-Case Travelling Wheel
QB/T 1586.3 Hardware Fitting of Case and Bag-Case-handle
QB/T 1586.5 Hardware fitting of case and bag-Draw rod
QB/T 2002.1 Hardware Fitting of Leather-Technical Conditions of Electroplated Coating
QB/T 2002.2 Hardware Fitting of Leather-Technical Conditions of Surface Spray Coating
QB/T 2171 Metal Zipper
QB/T 2172 Injection molding Zipper
QB/T 2173 Nylon Zipper
QB/T 2537 Leather-Tests for Colour Fastness-Colour Fastness to Cycles of to-and-fro Rubbing
QB/T 2918 Case and Bag-Test Method for Impact Resistance by Means of Falling Weight
Foreword I
1 Scope
2 Normative References
3 Product Classification
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Annex A (Normative) Special Type Inspection
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, labelling, packaging, transportation and storage for travelling case and trolley bag (hard and soft).
This standard is applicable to various travelling cases and trolley bags with such functions as loading and carrying clothes and equipped with traveling wheel and pull rods.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 231.1 Metallic materials--Brinell hardness test--Part 1:Test method
GB/T2912.1 Textiles-Determination of Formaldehyde-Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 3920 Textiles-Tests for Colour Fastness-Colour Fastness to Rubbing
GB/T 17592 Textiles-Determination of the Banned Azo Colourants
GB 19340 Adhesives for Footwear and Base and Bag
GB/T 19941 Leather and fur-Chemical tests-Determination of formaldehyde content
GB/T 19942 Leather and Fur-Chemical Tests-Determination of Banned Azo Colourants
GB 20400 Leather and fur-Limit of Harmful Matter
GB 21550 The Restriction of Hazardous Materials in Polyvinyl Chloride Artificial Leather
GB/T 22889 Leather-Physical and mechanical tests-Determination of surface coating thickness
QB/T 1586.1 Hardware Fitting of Case and bag-Case-lock
QB/T 1586.2 Hardware Fitting of Case and bag-Case Travelling Wheel
QB/T 1586.3 Hardware Fitting of Case and Bag-Case-handle
QB/T 1586.5 Hardware fitting of case and bag-Draw rod
QB/T 2002.1 Hardware Fitting of Leather-Technical Conditions of Electroplated Coating
QB/T 2002.2 Hardware Fitting of Leather-Technical Conditions of Surface Spray Coating
QB/T 2171 Metal Zipper
QB/T 2172 Injection molding Zipper
QB/T 2173 Nylon Zipper
QB/T 2537 Leather-Tests for Colour Fastness-Colour Fastness to Cycles of to-and-fro Rubbing
QB/T 2918 Case and Bag-Test Method for Impact Resistance by Means of Falling Weight
Contents of QB/T 2155-2018
Foreword I
1 Scope
2 Normative References
3 Product Classification
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Annex A (Normative) Special Type Inspection
