1 Scope
This standard specifies wooden desk for writing in terms of product classification, terms and definitions, requirements, test methods, inspection rules and instructions for use, marking, packaging, transport and storage.
This standard is applicable to wooden desks which are made of wood and wood-based panel, etc. for the purpose of writing and office. It is not applicable to the desk for study.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3324 Wooden furniture - General Technical Requirements
GB/T 2828.1 Sampling Procedures for Inspection by Attributea – Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB/T 3325 Metal Furniture - General Technical Requirements
GB/T 10357.1 Test of Mechanical Properties of Furniture - Strength and Durability of Tables
GB/T 10357.5 Test of Mechanical Properties of Furniture - Strength and Durability of Storage Units
GB/T 10357.7 Test of Mechanical Properties of Furniture - Stability of Tables
GB 15763.2-2005 Safety Glazing Materials in Building - Part 2: Tempered Glass
GB/T 17657-1999 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18581 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Solvent Based Coatings for Woodenware
GB 18584 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Wood Based Furniture
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
QB/T 1327 Test Method for Color Rubbing Fastness of Leather Surface
QB/T 1950 Determination of Resistance to Water of Furniture Surface Coatings
QB/T 2454 Hardware for Furniture - Guide Rails - Requirements and Inspection
QB/T 2913.2-2007 Term Standards of Finished Panel Furniture - Part 2: Term of Table
QB/T 3826-1999 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products Neutral Salt Spraying Test (NSS)
3 Terms and Definitions
For the purpose of this standard, the terms and definitions established in QB/T 2913.2-2007 and the following apply.
3.1
Keyboard support
Push-and-pull support plate installed under desktop for supporting the keyboard.
3.2
Interlock
Devices capable of locking more than one drawer on the sample surface.
3.3
Transaction surface
Surface separated from main desk in the vertical direction and for stacking temporary files.
3.4
Tall desk
Writing desk of whole height not less than 1067mm.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Instructions for Use, Marking, Packaging, Transport, Storage
Appendix A (Normative) Annual Average Equilibrium Moisture Content of Wood in China
1 Scope
This standard specifies wooden desk for writing in terms of product classification, terms and definitions, requirements, test methods, inspection rules and instructions for use, marking, packaging, transport and storage.
This standard is applicable to wooden desks which are made of wood and wood-based panel, etc. for the purpose of writing and office. It is not applicable to the desk for study.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3324 Wooden furniture - General Technical Requirements
GB/T 2828.1 Sampling Procedures for Inspection by Attributea – Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB/T 3325 Metal Furniture - General Technical Requirements
GB/T 10357.1 Test of Mechanical Properties of Furniture - Strength and Durability of Tables
GB/T 10357.5 Test of Mechanical Properties of Furniture - Strength and Durability of Storage Units
GB/T 10357.7 Test of Mechanical Properties of Furniture - Stability of Tables
GB 15763.2-2005 Safety Glazing Materials in Building - Part 2: Tempered Glass
GB/T 17657-1999 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18581 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Solvent Based Coatings for Woodenware
GB 18584 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Wood Based Furniture
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
QB/T 1327 Test Method for Color Rubbing Fastness of Leather Surface
QB/T 1950 Determination of Resistance to Water of Furniture Surface Coatings
QB/T 2454 Hardware for Furniture - Guide Rails - Requirements and Inspection
QB/T 2913.2-2007 Term Standards of Finished Panel Furniture - Part 2: Term of Table
QB/T 3826-1999 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products Neutral Salt Spraying Test (NSS)
3 Terms and Definitions
For the purpose of this standard, the terms and definitions established in QB/T 2913.2-2007 and the following apply.
3.1
Keyboard support
Push-and-pull support plate installed under desktop for supporting the keyboard.
3.2
Interlock
Devices capable of locking more than one drawer on the sample surface.
3.3
Transaction surface
Surface separated from main desk in the vertical direction and for stacking temporary files.
3.4
Tall desk
Writing desk of whole height not less than 1067mm.
Contents of QB/T 2384-2010
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Instructions for Use, Marking, Packaging, Transport, Storage
Appendix A (Normative) Annual Average Equilibrium Moisture Content of Wood in China