Detail of QB/T 4043-2010

Introduction of QB/T 4043-2010

1 Scope This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules as well as marking, packaging, transport and storage for Polyvinyl chloride artificial leather for automotive (hereinafter referred to as the “artificial leather”). This standard is applicable to polyvinyl chloride (PVC) artificial leather for automotive, which is made from PVC resin with plasticizer and other additives, knitted or plane woven fabric as the base, through calendering or coating. It is mainly used for automotive interior products. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies. GB/T 250-2008 Textiles - Tests for colour fastness - Grey scale for assessing change in color (ISO 105-A02: 1993, IDT) GB/T 625-2007 Chemical reagent - Sulfuric acid GB/T 629-1997 Chemical reagent - Sodium hydroxide GB/T 676-2007 Chemical reagent - Acetic acid GB/T 1040.1-2006 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1: 1993, IDT) GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3: 1995, IDT) GB/T 1263-2006 Chemical reagent - Disodium hydrogen phosphate dodecahydrate GB/T 1266-2006 Chemical reagent - Sodium chloride GB/T 2410-2008 Determination of the luminous transmittance and haze of transparent plastics GB/T 2918-1998 Plastics - Standard atmospheres for conditioning and testing (ISO 291: 1997, IDT) GB/T 3920-2008 Textiles - Tests for colour fastness - Colour fastness to rubbing (ISO 105-X12: 2001, MOD) GB/T 3923.2-1998 Textiles - Tensile properties of fabrics - Part 2: Determination of breaking force - Grab method GB/T 3978-2008 Standard illuminants and geometric conditions GB/T 3979-2008 Methods of measuring the colour of materials GB/T 4615-2008 Poly(vinyl chloride) - Determination of residual vinyl chloride monomer content - Gas chromatographic method GB/T 5478-2008 Plastics - Test method for wear by rolling GB/T 5671-1995 General purpose lithium lubricating grease for automobile GB/T 6836-2007 Sewing threads GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods GB/T 7707-2008 The intaglio prints for decorating GB/T 7565-1987 Textiles - Tests for color fastness - Specification for standard adjacent fabric: Cotton and viscose GB/T 7921-2008 Uniform color space and color difference formula GB/T 8807-1988 Test method for specular gloss of plastics GB/T 8410-2006 Flammability of automotive interior materials GB/T 8808-1988 Test method for peel force of flexible laminated plastics GB/T 8948-2008 Polyvinyl chloride artificial leather GB 11121-2006 Gasoline engine oils GB/T 12027-2004 Plastics - Film and sheet - Determination of dimensional change on heating (ISO 11501: 1995, IDT) GB 12981-2003 Motor vehicle brake fluids GB/T 15596-2009 Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources GB/T 16422.1-2006 Plastics - Methods of the exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1: 1999, IDT) GB/T 16422.2-1999 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2: 1994, IDT) GB/T 16578.1-2008 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method GB/T 17339-1998 Road vehicles - Safety glazing materials - Test methods for resistant-to-chemicals and resistant-to temperature changes GB 17930-2006 Gasoline for motor vehicles GB/T 18670-2002 Cosmetic classification GB/T 19147-2003 Automobile diesel fuels GB/T 19941-2005 Leather and fur - Chemical tests - Determination of formaldehyde content GB/T 19942-2005 Leather and fur - Chemical tests - Determination of banned azo colourants GB/T 20027-2005 Rubber-or plastic-coated fabrics - Determination of bursting strength (ISO 3303: 1990, IDT) FZ/T 60003-1991 Determination of nonwoven fabric mass per unit area HG/T 2-162-1965 Plastics - Low-temperature impact compression test method QC/T 15-1992 General test methods for automotive plastic products (Edition 2005) QB/T 1514-1992 Household sewing machine - Needle QB/T 2714-2005 Leather - Physical and mechanical tests - Determination of flex resistance QB/T 2725-2005 Leather - Determination of odour QB/T 2728-2005 Leather - Physical and mechanical tests - Determination of fogging characteristics

Contents of QB/T 4043-2010

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transport and storage Annex A (Normative) Typical spectral energy distribution Annex B (Normative) Chemical mediums used for chemical medium resistance test Annex C (normative) Names of 23 harmful aromatic amines Bibliography