This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport, storage and technical documents as to refuse collection vehicle.
This standard is applicable to the refuse collection vehicle modified with stereotyped automobile chassis.
This standard is not applicable to detachable container garbage collector and kitchen garbage vehicle.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated editions apply. For undated references, the latest edition (including any amendments) applies.
GB 1495 Limits and Measurement Methods for Noise Emitted by Accelerating Motor Vehicles
GB 1589 Limits of Dimensions, Axle load and Masses for Road Vehicles
GB/T 3766 Hydraulic Fluid Power - General Rules Relating to Systems
GB 4785 Prescription for Installation of the External Lighting and Light-signaling Devices for Motor Vehicles and Their Trailers
GB 7258 Technical Specifications for Safety of Power-driven Vehicles Operating on Roads
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB/T 12534 Motor Vehicles - General Rules of Road Test Method
JB/T 5943 The Universal Technique Specification of Weldment for Constriction Materials Machine
QC/T 484 Automobiles Paint Coating
QC/T 625 Metallic Coatings and Conversion Coatings for Automobiles
QC/T 29104 Limiting Value of Contamination Level of Solid Particles of Special Purpose Vehicle Hydraulic System
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply. 3.1
refuse collection vehicle
the vehicle for closed collection and transport of various refuses, with the whole or part of functions such as automatic loading, unloading and refuse compression available
3.2
effective capacity of the hopper
effective space of the hopper for refuse loading
3.3
dumping angle of the hopper
the included angle between the hopper bottom surface and the plane of the refuse collection vehicle beam when the hopper is dumping
3.4
volume ratio of the waste water tank
the ratio of waste water tank volume to the hopper effective volume (expressed in percentage)
Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Test Method 6 Inspection Rules 7 Marking, Packaging, Transport, Storage and on-Board Technical Documents Annex A (Informative) Test Record Sheet Annex B (Normative) Failure Classification and Statistics
1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport, storage and technical documents as to refuse collection vehicle.
This standard is applicable to the refuse collection vehicle modified with stereotyped automobile chassis.
This standard is not applicable to detachable container garbage collector and kitchen garbage vehicle.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated editions apply. For undated references, the latest edition (including any amendments) applies.
GB 1495 Limits and Measurement Methods for Noise Emitted by Accelerating Motor Vehicles
GB 1589 Limits of Dimensions, Axle load and Masses for Road Vehicles
GB/T 3766 Hydraulic Fluid Power - General Rules Relating to Systems
GB 4785 Prescription for Installation of the External Lighting and Light-signaling Devices for Motor Vehicles and Their Trailers
GB 7258 Technical Specifications for Safety of Power-driven Vehicles Operating on Roads
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB/T 12534 Motor Vehicles - General Rules of Road Test Method
JB/T 5943 The Universal Technique Specification of Weldment for Constriction Materials Machine
QC/T 484 Automobiles Paint Coating
QC/T 625 Metallic Coatings and Conversion Coatings for Automobiles
QC/T 29104 Limiting Value of Contamination Level of Solid Particles of Special Purpose Vehicle Hydraulic System
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply. 3.1
refuse collection vehicle
the vehicle for closed collection and transport of various refuses, with the whole or part of functions such as automatic loading, unloading and refuse compression available
3.2
effective capacity of the hopper
effective space of the hopper for refuse loading
3.3
dumping angle of the hopper
the included angle between the hopper bottom surface and the plane of the refuse collection vehicle beam when the hopper is dumping
3.4
volume ratio of the waste water tank
the ratio of waste water tank volume to the hopper effective volume (expressed in percentage)
Contents of QC/T 52-2015
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transport, Storage and on-Board Technical Documents
Annex A (Informative) Test Record Sheet
Annex B (Normative) Failure Classification and Statistics
