This standard specifies the requirements, test methods, inspection rules, packaging, storage and preservation of automotive starting motors.
This standard is applicable to automotive starting motors (hereinafter referred to as "starting motors").
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 4942.1 Classification of Degrees of Protection Provided by Enclosures of Rotating Electrical Machines (IP code)
GB/T 2828.1 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection (idt ISO 2859-1:1999)
QC/T 413-2002 Basic Specification for Automotive Electrical Equipment
QC/T 277 Test Method for Starting Motor Characteristics
3 Terms and Definitions
Foreword II 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Test Methods 6 Inspection Rules 7 Marking, Packaging, Storage and Preservation
1 Scope
This standard specifies the requirements, test methods, inspection rules, packaging, storage and preservation of automotive starting motors.
This standard is applicable to automotive starting motors (hereinafter referred to as "starting motors").
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 4942.1 Classification of Degrees of Protection Provided by Enclosures of Rotating Electrical Machines (IP code)
GB/T 2828.1 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection (idt ISO 2859-1:1999)
QC/T 413-2002 Basic Specification for Automotive Electrical Equipment
QC/T 277 Test Method for Starting Motor Characteristics
3 Terms and Definitions
Contents of QC/T 731-2005
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Storage and Preservation
