This standard specifies the terms and definitions, technical requirements, test methods, inspection rules as well as marking, packaging, transport and storage of recliners for passenger cars.
This standard is applicable to recliners for M1 car seats, including power and manual recliners. Manual recliners include continuous manual recliners and dis-continuous manual recliners. For recliners for M2 and M3 car seats, this standard may serve as a reference.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3730.1-2001 Motor vehicles and trailers - Types - Terms and definitions
GB 11552-1999 Passenger car - Internal protrusions
GB 14167 Safety-belt anchorages for vehicles
GB 15083 Strength requirement and test method of automobile seats, their anchorages and any head restraints
QC/T 740-2005 Seat assembly of passenger car
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
seat assembly
seat with fully assembled parts and components
3.2
power recliner assembly
assembly system composed of a power recliner, a driving motor and a transmission rod
3.3
continuous manual recliner
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Technical requirements 5 Test method 6 Inspection rules 7 Marking, packaging, transport and storage
1 Scope
This standard specifies the terms and definitions, technical requirements, test methods, inspection rules as well as marking, packaging, transport and storage of recliners for passenger cars.
This standard is applicable to recliners for M1 car seats, including power and manual recliners. Manual recliners include continuous manual recliners and dis-continuous manual recliners. For recliners for M2 and M3 car seats, this standard may serve as a reference.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3730.1-2001 Motor vehicles and trailers - Types - Terms and definitions
GB 11552-1999 Passenger car - Internal protrusions
GB 14167 Safety-belt anchorages for vehicles
GB 15083 Strength requirement and test method of automobile seats, their anchorages and any head restraints
QC/T 740-2005 Seat assembly of passenger car
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
seat assembly
seat with fully assembled parts and components
3.2
power recliner assembly
assembly system composed of a power recliner, a driving motor and a transmission rod
3.3
continuous manual recliner
Contents of QC/T 844-2011
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Test method
6 Inspection rules
7 Marking, packaging, transport and storage
