Static firing test procedures of solid rocket motors
1 Scope
1.1 Subject content
This standard specifies the stage division, work content and completion mark of static firing test of solid rocket motors (hereinafter referred to as “motors”).
1.2 Application scope
This standard is applicable to the static firing test of various motors.
1.3 Application guide
In order to ensure the flexibility and applicability of this standard and prevent the indiscriminate copying of standard provisions, the "detailed requirements" of this standard can be tailored for the tests of different types of motors, tests at different development stages, different test objectives, test costs and schedule, and the tailored test procedures and detailed requirements shall be included in the test task manual and test management files for further management and inspection.
2 Normative references
GJB 2365 Parameters-measuring method for static firing test of solid rocket motor
QJ 1010A Preparation and management of task manual
QJ 1047 Specification for processing pressure-time and thrust-time data of solid rocket motors
QJ 1118 Specification for design of test frame of solid rocket motors
QJ 1167~1170 Management system for research and development documents
3 Definitions
There is no provision in this clause.
1 Scope 2 Normative references 3 Definitions 4 General requirements 5 Specific requirements Additional explanation
Static firing test procedures of solid rocket motors
1 Scope
1.1 Subject content
This standard specifies the stage division, work content and completion mark of static firing test of solid rocket motors (hereinafter referred to as “motors”).
1.2 Application scope
This standard is applicable to the static firing test of various motors.
1.3 Application guide
In order to ensure the flexibility and applicability of this standard and prevent the indiscriminate copying of standard provisions, the "detailed requirements" of this standard can be tailored for the tests of different types of motors, tests at different development stages, different test objectives, test costs and schedule, and the tailored test procedures and detailed requirements shall be included in the test task manual and test management files for further management and inspection.
2 Normative references
GJB 2365 Parameters-measuring method for static firing test of solid rocket motor
QJ 1010A Preparation and management of task manual
QJ 1047 Specification for processing pressure-time and thrust-time data of solid rocket motors
QJ 1118 Specification for design of test frame of solid rocket motors
QJ 1167~1170 Management system for research and development documents
3 Definitions
There is no provision in this clause.
Contents of QJ 1004-1994
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 Specific requirements
Additional explanation
