1. Scope
This Standard specifies the flame retardant property requirements and test methods for the decorating materials for multiple unit train.
This Standard is applicable to the flame retardant decorating materials for the multiple unit train with an operation speed larger than or equal to 200km/h.
2. Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 2406.2-2009 Plastics - Determination of Burning Behavior by Oxygen Index - Part 2: Ambient-temperature Test (ISO 4589-2: 1996, IDT)
GB 5085.3-2007 Identification Standards for Hazardous Wastes-Identification for Corrosivity
GB/T 5454-1997 Textiles - Burning Behavior - Oxygen Index Method (neq ISO 4589: 1984)
GB/T 8323.2-2008 Plastic - Smoke Generation - Part 2: Determination of Optical Density by a Single-chamber Test (ISO 5659-2: 2006, IDT)
GB/T 8924-2005 Test Method for Flammability Characteristics of Fiber Reinforced Plastics - Oxygen Index Method
GB/T 10707-2008 Rubber - Determination of the Burning
GB/T 15262-1994 Ambient Air-Determination of Sulfur Dioxide-Formaldehyde Absorbing-Pararosaniline Spectrophotometry
GB/T 17096-1997 Hygienic Standard for Nitrogen Oxides in Indoor Air
UIC 564-2-1991 Regulations relating to fire protection and fire-fighting measures in passenger-carrying railway vehicles or assimilated vehicles used on international services
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Foreword i
1. Scope
2. Normative References
3. Technical Requirements:
4. Test Methods
1. Scope
This Standard specifies the flame retardant property requirements and test methods for the decorating materials for multiple unit train.
This Standard is applicable to the flame retardant decorating materials for the multiple unit train with an operation speed larger than or equal to 200km/h.
2. Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 2406.2-2009 Plastics - Determination of Burning Behavior by Oxygen Index - Part 2: Ambient-temperature Test (ISO 4589-2: 1996, IDT)
GB 5085.3-2007 Identification Standards for Hazardous Wastes-Identification for Corrosivity
GB/T 5454-1997 Textiles - Burning Behavior - Oxygen Index Method (neq ISO 4589: 1984)
GB/T 8323.2-2008 Plastic - Smoke Generation - Part 2: Determination of Optical Density by a Single-chamber Test (ISO 5659-2: 2006, IDT)
GB/T 8924-2005 Test Method for Flammability Characteristics of Fiber Reinforced Plastics - Oxygen Index Method
GB/T 10707-2008 Rubber - Determination of the Burning
GB/T 15262-1994 Ambient Air-Determination of Sulfur Dioxide-Formaldehyde Absorbing-Pararosaniline Spectrophotometry
GB/T 17096-1997 Hygienic Standard for Nitrogen Oxides in Indoor Air
UIC 564-2-1991 Regulations relating to fire protection and fire-fighting measures in passenger-carrying railway vehicles or assimilated vehicles used on international services
ASTM E662-09 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Contents of TB/T 3237-2010
Foreword i
1. Scope
2. Normative References
3. Technical Requirements:
4. Test Methods