This standard specifies the product classification, requirements, test methods, inspection rules, marking, operating instructions as well as packaging, transportation and storage of the plastic optical fibre for communication (hereinafter referred to as optical fibre).
This standard is applicable to plastic optical fibre whose refractive index distribution is suddenly-varied type, multistep type or gradually-varied type, with plastic core and plastic cladding and used for short distance communication in industrial equipment, electrical equipment, consumer electronics equipment, transducer, access network and local area network as well as vehicle, ship and aircraft. For the plastic optical fiber in the field of decorative lighting, this standard may also be applied by reference.
Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Product Classification 4.1 Optical Fibre Pattern 4.2 Pattern of Tight Buffer Fibre 4.3 Marking 5 Requirements 5.1 Structures 5.2 Length 5.3 Property Requirements 6 Test Methods 6.1 General 6.2 Tight Buffer Fibre Structure Inspection 6.3 Optical Fibre and Tight Buffer Fibre Length Inspection 6.4 Optical Fibre and Tight Buffer Fibre Macrobending Loss Test 6.5 Optical Fibre and Tight Buffer Fibre Mechanical Property Test 6.6 Environmental Property Test of Optical Fibre and Tight Buffer Fibre 7 Inspection Rules 7.1 General 7.2 Terms 7.3 End-of-manufacturing inspection 7.4 Type Inspection 8 Operating Instructions 9 Packaging, Transportation and Storage 9.1 Packaging 9.2 Transportation and Storage Appendix A (Normative) Performance Index of PMMA Plastic Optical Fibre and its Tight Buffer Fibre Appendix B (Normative) Performance Index of Fluorinated Plastic Optical Fibre Appendix C (Normative) Plastic Optical Fibre Interference Mode Device and Parameters
This standard specifies the product classification, requirements, test methods, inspection rules, marking, operating instructions as well as packaging, transportation and storage of the plastic optical fibre for communication (hereinafter referred to as optical fibre).
This standard is applicable to plastic optical fibre whose refractive index distribution is suddenly-varied type, multistep type or gradually-varied type, with plastic core and plastic cladding and used for short distance communication in industrial equipment, electrical equipment, consumer electronics equipment, transducer, access network and local area network as well as vehicle, ship and aircraft. For the plastic optical fiber in the field of decorative lighting, this standard may also be applied by reference.
Contents of YD/T 1447-2013
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
4.1 Optical Fibre Pattern
4.2 Pattern of Tight Buffer Fibre
4.3 Marking
5 Requirements
5.1 Structures
5.2 Length
5.3 Property Requirements
6 Test Methods
6.1 General
6.2 Tight Buffer Fibre Structure Inspection
6.3 Optical Fibre and Tight Buffer Fibre Length Inspection
6.4 Optical Fibre and Tight Buffer Fibre Macrobending Loss Test
6.5 Optical Fibre and Tight Buffer Fibre Mechanical Property Test
6.6 Environmental Property Test of Optical Fibre and Tight Buffer Fibre
7 Inspection Rules
7.1 General
7.2 Terms
7.3 End-of-manufacturing inspection
7.4 Type Inspection
8 Operating Instructions
9 Packaging, Transportation and Storage
9.1 Packaging
9.2 Transportation and Storage
Appendix A (Normative) Performance Index of PMMA Plastic Optical Fibre and its Tight Buffer Fibre
Appendix B (Normative) Performance Index of Fluorinated Plastic Optical Fibre
Appendix C (Normative) Plastic Optical Fibre Interference Mode Device and Parameters
