Detail of YD/T 1680-2013

Introduction of YD/T 1680-2013

1 Scope This standard specifies test methods for aspects such as function, performance of each layer, environmental adaptability, lifetime, power supply and charger, appearance and assembly of high rate packet data (Phase 2) access terminal of 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network. It is applicable to 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal supporting UIM card (removable) and not supporting UIM card (integrated). For 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal supporting UIM card, all the items in this standard apply; for 800MHz/2GHz cdma2000 HRPD (Phase 2) access terminal not supporting UIM card, the test items involving UIM card and UIM interface do not apply. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements GB/T 18287 General Specification of Lithium-ion Battery for Cellular Phone GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone GB 19484.1 Requirement and Measurement Methods of Electromagnetic Compatibility for 800MHz CDMA Digital Cellular Telecommunications Systems - Part 1: Mobile Station and Ancillary Equipment YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment YD/T 1168 The Technical Requirement of User Identify Module (UIM) for 800MHz CDMA Digital Cellular Mobile Telecommunication Network YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset YD/T 1583 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Upper Layer (Layer 3) Signaling of Air Interface Specification YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment YD/T 1597.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz cdma2000 Digital Cellular Mobile Communications System - Part 1: User Equipment and Ancillary Equipment YD/T 1679 Technical Requirements for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Network Equipment - High Rate Packet Data (Phase 2) - Access Terminal YD/T 1681 Technical Requirements for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks - High Rate Packet Data (HRPD) (Phase II) - Air Interface YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal 3GPP2 C.S0029 Test Application Specification (TAS) for High Rate Packet Data Air Interface 3GPP2 C.S0033-Av2.0 Recommended Minimum Performance Standards for cdma2000 High Rate Packet Data Access Terminal 3 Abbreviations and Symbols 3.1 Abbreviations For the purposes of this document, the following abbreviations apply.

Contents of YD/T 1680-2013

Foreword i 1 Scope 2 Normative References 3 Abbreviations and Symbols 3.1 Abbreviations 3.2 Symbols 4 Functional Test for Access Terminal 5 Physical Layer Performance Test 5.1 Methods of Measurement for Receiver 5.2 Transmitter Test 6 MAC Layer Minimum Standards 6.1 Control Channel Supervision 6.2 Data Rate Control Performance 6.3 Demodulation of Forward Traffic Channel during Soft Handoff 6.4 Supervision Procedures in Variable Rate State 6.5 Access Probes Output Power 6.6 Reverse Traffic Channel Initial Transmit Power 6.7 Reverse Traffic Channel Transmit Power 6.8 Reverse Traffic Channel MAC Rate Transition Probabilities 6.9 Maximum Traffic-to-Pilot Power Ratio 7 Minimum Standards of Connection Layer Performance 7.1 Idle Handoff in Continuous Operation Mode 7.2 Idle Handoff in Slotted Operation Mode 7.3 Neighbor Set Pilot Detection and Incorrect Detection in Soft Handoff 7.4 Candidate Set Pilot Detection and Incorrect Detection in Soft Handoff 7.5 Active Set Pilot Loss Detection in Soft Handoff 7.6 Hard Handoff to Another Frequency 8 Environmental Adaptability Requirements and Tests for Access Terminal 9 Test for Standby Time and Conversation Time for Access Terminal 10 Requirements and Test for Access Terminal Card Interface 11 Electrical Safety Test 12 Electromagnetic Compatibility Test 13 Test for SAR 14 Content Requirements for Access Terminal Card (with R-UIM) Compared With That (without UIM) 15 Power Supply and Charger Test for Access Terminal 16 Appearance, Packaging and Assembling Test Annex A (Normative) Standard Test Conditions Annex B (Normative) Confidence Interval Annex C (Normative) HRPD Equations Annex D (Normative) HRPD Tolerances