Detail of YD/T 1777.1-2008

Introduction of YD/T 1777.1-2008

1 Scope This part specifies the testing methods for user equipment of TD-SCDMA digital cellular mobile communication network in services, operation, radio frequency performance, audio frequency, environment and reliability, electromagnetic compatibility and service life. This part is applicable to all versions of TD-SCDMA Terminals. As for the HSDPA related requirements, the one for the terminal supporting single carrier HSDPA operation is requisite. 2 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. YD/T 856-1996 Technical requirement and test method for power supply of mobile communication handsets GB/T 18287-2000 General specification of lithium-ion battery for cellular phone GB/T 18288-2000 General specification of nickel-metal hydride battery for cellular phone GB/T 18289-2000 General specification of nickel-cadmium battery for cellular phone GB 4943-2001 Safety of information technology equipment GB/T2421-1999 Environmental testing for electric and electronic products--Part 1: General and guidance GB/T2423.1-2001 Environmental testing for electric and electronic products--Part 2: Test methods--Tests A: Cold GB/T2423.2-2001 Environmental testing for electric and electronic products--Part 2:Test methods--Tests B: Dry heat GB/T2423.3-1993 Basic environmental testing procedures for electric and electronic products-Test Ca: Damp heat, steady state GB/T2423.5-1995 Environmental testing for electric and electronic products Part 2:Test methods Test Ea and guidance: Shock GB/T2423.6-1995 Environmental testing for electric and electronic products-Part 2: Test methods-Test Eb and guidance: Bump GB/T2423.11-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fd: Random vibration wide band—General requirements GB/T2423.13-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fdb: Random vibration wide band—Reproducibility medium GB/T2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka: Salt mist GB/T2423.22-2002 Environmental testing for electric and electronic products--Part 2:Test methods Test N: Change of temperature GB/T2423.44-1995 Environmental testing for electric and electronic products Part 2: Test methods Test Eg: Impact, spring hammer GB/T2424.1-1989 Basic environmental testing procedures for electric and electronic products Guidance for high temperature and low temperature tests GB/T2424.2-1993 Basic environmental testing procedures for electric and electronic products Guidance for damp heat tests GB/T2424.13-2002 Environmental testing for electric and electronic and electronic products--Part 2:Test methods--Guidance on change of temperature tests GB 4796-84 Classification of environmental parameters and their severities of electric and electronic products GB/T4798.7-87 Environmental conditions existing in the application of electric and electronic products; Portable and non-stationary use GB/T6113.1-1995 Specifications for radio disturbance and immunity measuring apparatus GB 9254 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement GB 17625.1 The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments (equipment input current≤16A per phase) GB 17625.2 Electromagnetic compatibility limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A GB/T 17626.2 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test GB/T 17626.3 Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test GB/T 17626.4 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test GB/T 17626.5 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test GB/T 17626.6 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields GB/T 17626.11 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests YD/T 1776-2008 Technical Requirements for User Equipment (HSDPA)of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network ISO 7637-1 (1990 Road vehicles - Electrical disturbances from conduction and coupling -Part 1: Definitions and general considerations ISO 7637-2 (1990 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only ITU-RSM.329-10 Unwanted emissions in the spurious domain 3GPPTS 34.108 Common Test Environments for User Equipment (UE) Conformance Testing 3GPPTS 34.123 User Equipment (UE) conformance specification; Part 1: Protocol conformance specification 3 Abbreviations For the purposes of this part, the following abbreviations apply. ACLR Adjacent Channel Leakage power Ratio ACS Adjacent Channel Selectivity AFC Automatic Frequency Control AGC Automatic Gain Control AM Acknowledged Mode AMR Adaptive Multi Rate ANR Ambient Noise Rejection AS Access Stratum ASD Acceleration Spectral Density ATM Asynchronous Transfer Mode AuC Authentication Centre AWGN Additive White Gaussian Noise BCCH Broadcast Control Channel BCH Broadcast Channel BER Bit Error Ratio BLER Block Error Ratio CCCH Common Control Channel CCPCH Common Control Physical Channel CM Connection Management CN Core Network CRNC Controlling Radio Network Controller CS Circuit Switched

Contents of YD/T 1777.1-2008

Foreword i 1 Scope 2 Normative References 3 Abbreviations 4 Test Environment 5 Services 6 UE Basic Operations 7 RF Performance 8 Terminal Electricity Consumption Performance Test 9 Audio Frequency 10 Reliability 11 Electromagnetic Compatibility 12 Specific Absorption Rate (SAR) Test 13 Battery Charger Test 14 Package and Appearance Annex A (Informative) Reference Signaling Process Annex B (Normative) Measurement Channel Annex C (Normative) Propagation Condition Annex D (Normative) Test Environment Annex E (Normative) Basic Test Flow Annex F (Normative) Pilot Frequency Cell Reelection Annex G (Normative) Default Message