1 Scope
This standard specifies the test method for multimode single standby user equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS) in terms of service and function, protocol conformance, radio resource management conformance and network compatibility.
This standard is applicable to multimode single standby user equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS).
2 Normative References
The following documents are essential to the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 18287 General specification of Lithinum-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
GB/T 22450.1 Limit and Measurement Methods of Electromagnetic Compatibility for 900/1800MHz TDMA Digital Cellular Telecommunications Systems—Part 1: Mobile Station and Ancillary Equipment
YD/T 1215 Testing Methods of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS) Equipment: Mobile Station
YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1368.1 Testing Method for User Equipment of 2GHz WCDMA Digital Cellular Mobile Communication Network—Part 1: Basic Function, Service and Performance Test.
YD/T 1538 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1591 Technical Requirements and Test Method for Power Adapter and Charging/Data Port of Mobile Telecommunication Terminal Equipment
YD/T 1592.1 Technical Specification and Testing Methods for Electromagnetic Compatibility for 2GHz TD-SCDMA Digital Cellular Mobile Communications System—Part 1:User Equipment and Ancillary Equipment
YD/T 1595.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz WCDMA Digital Cellular Mobile Communication System—Part 1:User Equipment and Ancillary Equipment
YD/T 1644 Human Exposure to Radio Frequency Fields From Hand-held and Body-mounted Wireless Communication Devices - Human Models Instrumentation and Procedures (All Parts)
YD/T 1763 Test Method of TD-SCDMA/WCDMA Digital Cellular Mobile Communication Network for UICC-Terminal Interface (All Parts)
YD/T 1779 Test Method of TD-SCDMA/GSM (GPRS) Dual Mode Digital Mobile Station
YD/T 2218.1 Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase 4)—Part:1 Basic Functions, Services and Performance Test of High Speed Packet Access (HSPA)
YD/T 2220 Technical Requirements and Test Method of WCDMA/GSM(GPRS) Dual Mode Digital Mobile Telecommunication Terminal (Phase 4)
YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
YD/T 2582 Test Method for UICC-Terminal Cu Interface of LTE Digital Cellular Mobile Communication Network (All Parts)
YD/T 2583.14 Requirements and Measurement Methods of Electromagnetic Compatibility for Cellular Mobile Telecommunications Equipment—Part 14: LTE User Equipment and Ancillary Equipment
YD/T 2578.1~5 Test Method for User Equipment of LTE FDD Digital Cellular Mobile Telecommunication Network (Phase 1)
3GPP TS 51.010-1 GSM/EDGE Radio Access Network: Digital Cellular Telecommunications System (Phase 2+): Mobile Station (MS) Conformance Specification; Part1: Conformance Specification
3GPP TS 51.010-4 Technical Specification Group Core Network and Terminal; Mobile Station (MS) Conformance Specification; Part 4: Subscriber Identity Module SIM) Application Toolkit Conformance Test Specification
3GPP TS23.401 Technical Specification Group Services and System Aspect; General Packet Radio Service (GPRS) Enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTR AN) Access
3GPP TS34.121-1 Technical Specification Group Radio Access Network; User Equipment (UE) Conformance Specification; Radio Transmission and Reception (FDD); Part 1: Conformance Specification
Foreword i
1 Scope
2 Normative References
3 Abbreviations
4 Test Method for Multimode Single Standby Equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS)
4.1 Test Method in the Working Mode of GSM
4.2 Test Method in the Working Mode of WCDMA
4.3 Test Method in the Working Mode of TD-SCDMA
4.4 Test Method in the Working Mode of LTE FDD
4.5 Test Method in the Working Mode of TD-LTE
4.6 Test Method in WCDMA/GSM Dualmode Single Standby Mode
4.7 Test Method in TD-SCDMA/GSM Dualmode Single Standby Mode
4.8 Test Method in TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM(GPRS) Pentamode Single Standby
5 Card Interface Test
6 Reliability Test
6.1 Voltage Test
6.2 Other Reliability Test
7 Audio Performance Test
8 Electromagnetic Compatibility Test
9 Test of Specific Absorption Rate (SAR)
10 Test of Battery, Battery Charger and Interface
10.1 Battery
10.2 Characteristics of Battery and Interface
11 Appearance, Packaging and Assembly
1 Scope
This standard specifies the test method for multimode single standby user equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS) in terms of service and function, protocol conformance, radio resource management conformance and network compatibility.
This standard is applicable to multimode single standby user equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS).
2 Normative References
The following documents are essential to the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 18287 General specification of Lithinum-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
GB/T 22450.1 Limit and Measurement Methods of Electromagnetic Compatibility for 900/1800MHz TDMA Digital Cellular Telecommunications Systems—Part 1: Mobile Station and Ancillary Equipment
YD/T 1215 Testing Methods of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS) Equipment: Mobile Station
YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1368.1 Testing Method for User Equipment of 2GHz WCDMA Digital Cellular Mobile Communication Network—Part 1: Basic Function, Service and Performance Test.
YD/T 1538 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1591 Technical Requirements and Test Method for Power Adapter and Charging/Data Port of Mobile Telecommunication Terminal Equipment
YD/T 1592.1 Technical Specification and Testing Methods for Electromagnetic Compatibility for 2GHz TD-SCDMA Digital Cellular Mobile Communications System—Part 1:User Equipment and Ancillary Equipment
YD/T 1595.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz WCDMA Digital Cellular Mobile Communication System—Part 1:User Equipment and Ancillary Equipment
YD/T 1644 Human Exposure to Radio Frequency Fields From Hand-held and Body-mounted Wireless Communication Devices - Human Models Instrumentation and Procedures (All Parts)
YD/T 1763 Test Method of TD-SCDMA/WCDMA Digital Cellular Mobile Communication Network for UICC-Terminal Interface (All Parts)
YD/T 1779 Test Method of TD-SCDMA/GSM (GPRS) Dual Mode Digital Mobile Station
YD/T 2218.1 Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase 4)—Part:1 Basic Functions, Services and Performance Test of High Speed Packet Access (HSPA)
YD/T 2220 Technical Requirements and Test Method of WCDMA/GSM(GPRS) Dual Mode Digital Mobile Telecommunication Terminal (Phase 4)
YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
YD/T 2582 Test Method for UICC-Terminal Cu Interface of LTE Digital Cellular Mobile Communication Network (All Parts)
YD/T 2583.14 Requirements and Measurement Methods of Electromagnetic Compatibility for Cellular Mobile Telecommunications Equipment—Part 14: LTE User Equipment and Ancillary Equipment
YD/T 2578.1~5 Test Method for User Equipment of LTE FDD Digital Cellular Mobile Telecommunication Network (Phase 1)
3GPP TS 51.010-1 GSM/EDGE Radio Access Network: Digital Cellular Telecommunications System (Phase 2+): Mobile Station (MS) Conformance Specification; Part1: Conformance Specification
3GPP TS 51.010-4 Technical Specification Group Core Network and Terminal; Mobile Station (MS) Conformance Specification; Part 4: Subscriber Identity Module SIM) Application Toolkit Conformance Test Specification
3GPP TS23.401 Technical Specification Group Services and System Aspect; General Packet Radio Service (GPRS) Enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTR AN) Access
3GPP TS34.121-1 Technical Specification Group Radio Access Network; User Equipment (UE) Conformance Specification; Radio Transmission and Reception (FDD); Part 1: Conformance Specification
Contents of YD/T 2599-2013
Foreword i
1 Scope
2 Normative References
3 Abbreviations
4 Test Method for Multimode Single Standby Equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM (GPRS)
4.1 Test Method in the Working Mode of GSM
4.2 Test Method in the Working Mode of WCDMA
4.3 Test Method in the Working Mode of TD-SCDMA
4.4 Test Method in the Working Mode of LTE FDD
4.5 Test Method in the Working Mode of TD-LTE
4.6 Test Method in WCDMA/GSM Dualmode Single Standby Mode
4.7 Test Method in TD-SCDMA/GSM Dualmode Single Standby Mode
4.8 Test Method in TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM(GPRS) Pentamode Single Standby
5 Card Interface Test
6 Reliability Test
6.1 Voltage Test
6.2 Other Reliability Test
7 Audio Performance Test
8 Electromagnetic Compatibility Test
9 Test of Specific Absorption Rate (SAR)
10 Test of Battery, Battery Charger and Interface
10.1 Battery
10.2 Characteristics of Battery and Interface
11 Appearance, Packaging and Assembly