This standard specifies the structural types and materials, requirements, test methods, marking, packaging, transportation and storage, and other requirements of lacrimal sac retractors.
This standard is applicable to the retractors used to open the soft tissue of the incision to expose the lacrimal sac during lacrimal sac surgery (hereinafter referred to as "retractors").
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1220-2007 Stainless steel bars
YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance
YY/T 0171-2008 Surgical instruments - Packaging, marking and instructions
YY/T 1052 Marking requirements for surgical instruments
3 Types and materials
3.1 The types and basic dimensions of retractors shall meet the requirements of Figure 1 and Table 1.
Foreword 1 Scope 2 Normative references 3 Types and materials 4 Technical requirements 5 Test methods 6 Marking 7 Packaging, transportation and storage Annex A (Informative) Type inspection Bibliography
YY/T 0073-2013 Lacrimal sac retractor
1 Scope
This standard specifies the structural types and materials, requirements, test methods, marking, packaging, transportation and storage, and other requirements of lacrimal sac retractors.
This standard is applicable to the retractors used to open the soft tissue of the incision to expose the lacrimal sac during lacrimal sac surgery (hereinafter referred to as "retractors").
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1220-2007 Stainless steel bars
YY/T 0149-2006 Medical instruments of stainless steel - Test methods of corrosion resistance
YY/T 0171-2008 Surgical instruments - Packaging, marking and instructions
YY/T 1052 Marking requirements for surgical instruments
3 Types and materials
3.1 The types and basic dimensions of retractors shall meet the requirements of Figure 1 and Table 1.
Contents of YY/T 0073-2013
Foreword
1 Scope
2 Normative references
3 Types and materials
4 Technical requirements
5 Test methods
6 Marking
7 Packaging, transportation and storage
Annex A (Informative) Type inspection
Bibliography
