1 Scope
This standard specifies the type and basic dimension, requirements, test methods, inspection rules, mark, operation instruction, packing, transport and storage of the surgical implants metallic clip.
This standard is applicable to the surgical implants metallic clip (hereinafter referred to as "the metallic clip"). The metallic clip is used for clipping vessel and tubular tissue during the minimal invasive surgery of brain and abdominal cavity.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any amendments), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Type and Basic Dimensions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Mark and Operation Instruction
8 Packing, Transport and Storage
1 Scope
This standard specifies the type and basic dimension, requirements, test methods, inspection rules, mark, operation instruction, packing, transport and storage of the surgical implants metallic clip.
This standard is applicable to the surgical implants metallic clip (hereinafter referred to as "the metallic clip"). The metallic clip is used for clipping vessel and tubular tissue during the minimal invasive surgery of brain and abdominal cavity.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any amendments), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of YY/T 0079-2006
Foreword I
1 Scope
2 Normative References
3 Type and Basic Dimensions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Mark and Operation Instruction
8 Packing, Transport and Storage
