Title |
Standard No. |
Implemented On |

Sampling procedures for inspection by variables—Part 4:Procedures for assessment of declared quality levels for mean | GB/T 6378.4-2018 | 2019-2-1 |

Capability of detection—Part 2:Methodology in the linear calibration case | GB/T 33260.2-2018 | 2019-1-1 |

Capability of detection—Part 4:Methodology for comparing the minimum detectable value with a given value | GB/T 33260.4-2018 | 2019-1-1 |

Capability of detection—Part 5:Methodology in the linear and nonlinear calibration cases | GB/T 33260.5-2018 | 2019-1-1 |

Capability of detection—Part 3:Methodology for determination of the critical value for the response variable when no calibration data are used | GB/T 33260.3-2018 | 2019-1-1 |

Evaluation of measurement uncertainty in the chemical testing field—Applying quality control and method validation data | RB/T 141-2018 | 2018-12-1 |

Evaluation criteria for six sigma management | GB/T 36077-2018 | 2018-10-1 |

Statistical index system of automotive logistics | WB/T 1070-2018 | 2018-8-1 |

Statistical index system of iron and steel logistics | WB/T 1071-2018 | 2018-8-1 |

Statistical data and metadata exchange--Part 1: Framework | GB/T 34052.1-2017 | 2018-2-1 |

Statistical data and metadata exchange(SDMX)―Part 2:Information model―UML conceptual design | GB/Z 34052.2-2017 | 2018-2-1 |

Capability of detection--Part 1: Terms and definitions | GB/T 33260.1-2016 | 2017-7-1 |

Implementation guide of random sampling for discrete items | GB/Z 31233-2014 | 2015-4-15 |

Logistics Park Statistical Indicator System | GB/T 30337-2013 | 2014-7-1 |

Statistical indicator system of logistics prosperity index | GB/T 30336-2013 | 2014-7-1 |

Sampling inspection procedures for commodity applying to the case with prior information of quality | GB/T 28863-2012 | 2013-2-15 |

Accuracy(trueness and precision) of measurement methods and results - Part 3：Intermediate measures of the precision of a standard measurement method | GB/T 6379.3-2012 | 2013-2-15 |

Statistical methods for use in proficiency testing by interlaboratory comparisons | GB/T 28043-2011 | 2012-2-1 |

Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality | GB/T 26823-2011 | 2011-12-1 |

Sampling procedures for inspection by attributes—Part 5:System of sequential sampling plans indexed by acceptance quality limit(AQL)for lot-by-lot inspection | GB/T 2828.5-2011 | 2011-12-1 |

Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship | GB/T 27408-2010 | 2011-7-1 |

Quality control in laboratories applying statistical quality assurance and control charting techniques to evaluate analytical measurement system performance | GB/T 27407-2010 | 2011-7-1 |

Acceptance sampling plans and procedures for the inspection of bulk materials | GB/T 22555-2010 | 2011-4-1 |

Linear calibration using reference materials | GB/T 22554-2010 | 2011-4-1 |

Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes | GB/T 2828.10-2010 | 2011-4-1 |

Guidance for the use of repeatability reproducibility and trueness estimates in measurement uncertainty estimation | GB/Z 22553-2010 | 2010-12-1 |

Statistics—Vocabulary and symbols—Part 2:Applied statistics | GB/T 3358.2-2009 | 2010-2-1 |

Statistics—Vocabulary and symbols—Part 3:Design of experiments | GB/T 3358.3-2009 | 2010-2-1 |

Confidence limits of quantile and coefficient of variation for normal distribution | GB/T 10094-2009 | 2010-2-1 |

Lower confidence limit of reliability for omplete sample from normal distribution | GB/T 4885-2009 | 2010-2-1 |

Statistics—Vocabulary and symbols—Part 1:General statistical terms and terms used in probability | GB/T 3358.1-2009 | 2010-2-1 |

Statistical interpretation of data - Determination of statistical tolerance intervals | GB/T 3359-2009 | 2010-2-1 |

Terms and symbols for fault tree | GB/T 4888-2009 | 2009-12-1 |

Statistical interpretation of data - Multiple comparison for test results | GB/T 10092-2009 | 2009-12-1 |

Probabilistic limit states design(Normal-Normal mode) | GB/T 10093-2009 | 2009-12-1 |

Statistical interpretation of data - One-sided confidence lower limit of reliability for binomial distribution | GB/T 4087-2009 | 2009-12-1 |

Statistical interpretation of data - Parameter estimation for gamma distribution (Pearson Ⅲ distribution) | GB/T 8055-2009 | 2009-12-1 |

General rules for sampling inspection of bulk materials with uniform size | GB/T 13732-2009 | 2009-12-1 |

Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values | GB/T 6379.6-2009 | 2009-9-1 |

Statistical interpretation of data Estimation and hypothesis test of parameter in binomial distribution | GB/T 4088-2008 | 2009-1-1 |

Sampling procedures for inspection by attributes Part 11: Procedures for assessment of declared quality levels for small population | GB/T 2828.11-2008 | 2009-1-1 |

Choice of sample size for estimating the average quality of a lot or process | GB/T 4891-2008 | 2009-1-1 |

Statistical interpretation of data - Detection and treatment of outliers in the normal sample | GB/T 4883-2008 | 2009-1-1 |

Generation of random numbers and procedures applied to sampling inspection for product quality | GB/T 10111-2008 | 2009-1-1 |

Statistical interpretation of data - Techniques of estimation and tests relating to means and variances | GB/T 4889-2008 | 2009-1-1 |

Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection | GB/T 2828.2-2008 | 2009-1-1 |

Guide to acceptance sampling inspection | GB/T 13393-2008 | 2009-1-1 |

Re-inspection and re-test procedures for assessment of declared quality levels | GB/T 16306-2008 | 2009-1-1 |

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single qual | GB/T 6378.1-2008 | 2009-1-1 |

Statistical interpretation of data - Detection and treatment of outliers in the sample from exponential distribution | GB/T 8056-2008 | 2009-1-1 |

Sequential sampling plans for inspection by attributes | GB/T 8051-2008 | 2009-1-1 |

Statistical interpretation of data - Detection and treatment of outliers in the sample from typeⅠextreme value distribution | GB/T 6380-2008 | 2009-1-1 |

Statistical interpretation of data Estimation and hypothesis test of parameter in Poisson distribution | GB/T 4089-2008 | 2009-1-1 |

Sampling procedures and tables for small lot inspection by attributes for percent nonconforming items | GB/T 13264-2008 | 2009-1-1 |

Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures | GB/T 2828.3-2008 | 2009-1-1 |

Single sampling procedures and tables for Inspection having desired operating Characteristics by variables | GB/T 8054-2008 | 2009-1-1 |

Sampling procedures for inspection by variables - Part 4: Procedures for assessment of declared quality levels for mean | GB/T 6378.4-2008 | 2009-1-1 |

Rules of rounding off for numerical values & expression and judgement of limiting values | GB/T 8170-2008 | 2009-1-1 |

Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming | GB/T 13262-2008 | 2009-1-1 |

Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method | GB/T 6379.5-2006 | 2007-4-1 |

Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method | GB/T 6379.4-2006 | 2007-4-1 |

Standard practice for applying statistics of corrosion data | JB/T 10579-2006 | 2006-10-11 |

Cumulative Sum charts - Guidance on quality control and data analysis using CUSUM techniques | GB/Z 4887-2006 | 2006-10-1 |

Standard practice for laboratory bias evaluation using single test result from standard material | SN/T 1492-2004 | 2005-4-1 |

Accuracy(trueness and precision) of measurement methods and results - Part 1: General principles and definitions | GB/T 6379.1-2004 | 2005-1-1 |

Accuracy (trueness and precision) ofmeasurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method | GB/T 6379.2-2004 | 2005-1-1 |

Sampling procedures for inspection by attributea-Part1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection | GB/T 2828.1-2003 | 2004-3-1 |

Sequential sampling procedures and tables for inspection by attributes | GB/T 8051-2002 | 2003-1-1 |

Sampling procedures and charts for inspection by variables for percent nonconforming (Applied to inspection of successive lots or batches) | GB/T 6378-2002 | 2003-1-1 |

Control charts for arithmetic average with warning limits | GB/T 4886-2002 | 2002-12-1 |

Single and multi - level continuous sampling procedures and tables for inspection by attributes | GB/T 8052-2002 | 2002-12-1 |

Shewhart control charts | GB/T 4091-2001 | 2001-12-1 |

Statistical interpretation of data--Normality tests | GB/T 4882-2001 | 2001-9-1 |

Control charts--General guide and introduction | GB/T 17989-2000 | 2000-1-1 |

Interpretation of statistical data - Estimation of a median | GB/T 17560-1998 | 1999-7-1 |

Urban public transport - The calculation method of economic and technical indexes - Subway | CJ/T 8-1999 | 1999-6-4 |

Urban public transport - The calculation method of economic and technical indexes - Taxi | CJ/T 6-1999 | 1999-6-4 |

Urban public transport - The calculation method of economic and technical indexes - Ferryboat | CJ/T 7-1999 | 1999-6-4 |

Urban public transport - The calculation method of economic and technical indexes - Bus and trolleybus | CJ/T 5-1999 | 1999-6-4 |

Calculation and Inspection of Random Numbers | QJ 2935-1997 | 1997-10-1 |

Single sampling procedures and tables by attributes for product quality audit | GB/T 14437-1997 | 1997-1-2 |

Procedures and the plan of sampling for repeat test or inspection in product quality audit | GB/T 16306-1996 | 1996-11-1 |

Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean value | GB/T 8054-1995 | 1996-1-1 |

Single sampling procedures and tables for product quality audit of small population by attributes | GB/T 15482-1995 | 1996-1-1 |

Sampling procedures and tables for isolated lot inspection by attributes | GB/T 15239-1994 | 1995-6-1 |

Methods of random sampling by utilizing electronic sampler of random number | GB/T 15500-1995 | 1995-3-1 |

Random Series Spectral Analysis Method | QJ 2673-1994 | 1995-1-1 |

Single sampling procedures and tables for product quality audit by variables for mean value | GB/T 14900-1994 | 1994-8-1 |

Terms for statistics Part Ⅱ:terms for statisticalquality control | GB/T 3358.2-1993 | 1994-5-1 |

Terms for statistics. Part Ⅰ: Terms for general statistics | GB/T 3358.1-1993 | 1994-5-1 |

Terms for statistics. Part Ⅲ: terms for experimentaldesign | GB/T 3358.3-1993 | 1994-5-1 |

Lower confidence limit of normal probability within specified limits | GB/T 14438-1993 | 1994-1-1 |

Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundred units) | GB/T 14162-1993 | 1993-10-1 |

General rules for sampling inspection of bulk materials with uniform size | GB/T 13732-1992 | 1993-6-1 |

Rectifying sampling procedures and tables for inspections by attributes | GB/T 13546-1992 | 1993-4-1 |

Guide for sampling inspection | GB/T 13393-1992 | 1992-10-1 |

Sampling procedures and tables for inspection of small lots or batches by attributes for percent nonconforming | GB/T 13264-1991 | 1992-8-1 |

Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming | GB/T 13262-1991 | 1992-8-1 |

The procedures for skip-lot sampling inspection by attributes | GB/T 13263-1991 | 1992-8-1 |

Standard practice for applying statistics to analysis of corrosion data | GB/T 12336-1990 | 1990-12-1 |

Upper confidence limits of coefficient of variation for normal distribution | GB/T 11791-1989 | 1990-7-1 |

Methodsf for andom sampling by utilizing dices of random number | GB 10111-1988 | 1989-8-1 |

Sampling procedures and tables for periodic inspection by attributes ( Apply to inspection of stability for productive process) | GB/T 2829-1987 | 1988-5-1 |

Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches) | GB/T 2828-1987 | 1988-5-1 |

Single and multi-level continuous sampling procedures and tables for inspection by attributes | GB/T 8052-1987 | 1988-4-1 |

Statistical interpretation of data--Detection and handling of outlying observations in exponential sample | GB 8056-1987 | 1988-4-1 |

Statistical interpretation of data Parameter estimation for gamma distribution (Pearson 3 distribution) | GB 8055-1987 | 1988-4-1 |

Sequential sampling procedures and tables for inspection by attributes | GB/T 8051-1987 | 1988-4-1 |

Statistical interpretation of data; Detection and handling of outlying observations in the sample of type I extreme value distribution | GB 6380-1986 | 1987-5-1 |

Precision of test methods; Determination of repeatability and reproducibility for a standard test method by interlaboratory tests | GB 6379-1986 | 1987-5-1 |

Sampling procedures and charts for inspection by variables for percent nonconforming(Applied to inspection of successive lots or batches) | GB/T 6378-1986 | 1987-5-1 |

Choice of sample size to estimate the average quality of a lot or process | GB 4891-1985 | 1985-10-1 |

Control charts for arithmetic mean with warning limits | GB/T 4886-1985 | 1985-10-1 |

Terms and symbols of fault tree | GB 4888-1985 | 1985-10-1 |

One-sided reliability confidence lower limit (Normal distribution complete sample) | GB 4885-1985 | 1985-10-1 |

Cusum charts for counted/attributes data | GB/T 4887-1985 | 1985-10-1 |

Statistical interpretation of data;Comparison of two means in the case of paired observations | GB 3361-1982 | 1984-1-1 |

Statistical interpretation of data;Determination of a statistical tolerance interval | GB 3359-1982 | 1984-1-1 |