Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Services

LoginRegister

Title Standard No. Implemented On
Plastic equipment for water saving irrigation—Part 1:Drip tape with labyrinth on one sideGB/T 19812.1-20172018-5-1
Plastic equipment for water saving irrigation-Part 3:Drip pipe and drip tape inlaid with emitters insideGB/T 19812.3-20172018-5-1
Plastic equipment for water saving irrigation—Part 2: Pressure compensating emitter and emitting pipeGB/T 19812.2-20172018-5-1
Polyethylene/aluminum/polyethylene composite pressure pipe(overlap-welded)CJ/T 108-20152016-4-1
Design and construction code of optical fiber cable (high-density polyethene silicone duct) laying in the same trench with oil (gas) pipelineSY/T 4108-20122012-3-1
High-density polyethylene silicore plastic ductGB/T 24456-20092010-3-1
plastic equipment for water saving irrigarion - Drip pipe and tape inlaid with emitters insideGB/T 19812.3-20082008-9-1
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without flexingGB/T 5568-20062007-6-1
Determination of deflection for rigid plastic pipesQB/T 2803-20062006-10-11
Plastic pipes in coal mining Part 2: Polyvinyl chloride pipesMT 558.2-20052006-2-1
Plastic net protecting top-plane in coal miningMT 141-20052006-2-1
Plastic pipes in coal mining Part 3: Fibre-reinforced plastic pipesMT 558.3-20052006-1-1
Technical requirement for environmental labeling products Plastic pipes for constructionHJ/T 226-20052006-1-1
Plastic pipes in coal mining Part 1: Polyethylene pipesMT 558.1-20052006-1-1
Plastic equipment for water saving irrigation - Part 1 :Drip tape with labyrinth on one sideGB/T 19812.1-20052005-12-1
Plastic equipment for water saving irrigation--Part 2:Pressure compensating emitter and emitting pipeGB/T 19812.2-20052005-12-1
Code of design and conctruction acceptance of FOC (HDPE tube) laying in the same trench with oil (gas) pipelineSY/T 4108-20052005-10-1
Single wall corrugated plastics pipes for agricultural drainageGB/T 19647-20052005-9-1
Polyethlene/aluminium/polyethylene composite pipe press fittingCJ/T 190-20042004-8-1
High-density polyethylene silicon duct for highway communication conductJT/T 496-20042004-6-1
Polyethylene pipes—Resistance to slow crack growth—Cone test methodGB/T 19279-20032004-2-1
General terms and their definitions of thermoplastic pipes,fittings and valvesGB/T 19278-20032004-2-1
Thermoplastics pipes for the conveyance of fluids—Determination of resistance to rapid crack propagation(RCP)—Small-scale steady-state test (S4 test)GB/T 19280-20032004-2-1
Polyethylene/Aluminium/Polyethylene composite pressure pipe - Part 2: PE/AL/PE pipe butt - Welded by aluminium pipeGB/T 18997.2-20032003-10-1
Polyethylene/Aluminium/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe overlap-welded by aluminium pipeGB/T 18997.1-20032003-10-1
Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test methodGB/T 6111-20032003-8-1
Thermoplastics pipes--Determination of ring stiffnessGB/T 9647-20032003-8-1
Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy methodGB/T 18743-20022003-1-1
pipes - Determination of resistance to external blows - Round - The - Clock methodGB/T 14152-20012002-5-1
Table of universal wall thickness of thermoplastics pipeGB/T 10798-20012002-5-1
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficientGB/T 18475-20012002-5-1
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test)GB/T 18476-20012002-5-1
Pipes and fittings made of crosslinked polythylene (PE-X) - Estimation of the degree of crossinking by determination of the gel contentGB/T 18474-20012002-5-1
Thermoplastics pipes - Determination of longitudinal reversionGB/T 6671-20012002-5-1
Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressuresGB/T 4217-20012002-5-1
Thermoplastics pipes--Determination of creep ratioGB/T 18042-20002000-9-1
Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systemsGB/T 16800-19971998-1-1
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systemsGB/T 10002.3-19961997-5-1
Unplasticized polyvinyl chloride (PVC-U)pipe for water supplyGB/T 10002.1-19961997-5-1
Test method and specifications of susceptibility for environmental stress-cracking induced by insert-type fittings in low density polyethylene (PE)25 pipes for irrigation lateralsGB/T 15819-19951996-8-1
Hard polyvinyl chloride (PVC-U) pipes for chemical industry GB/T 4219-19961996-1-2
Standard test method for short - Time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluidsGB/T 15560-19951995-1-2
Rubber or plastics hoses and hose assemblies- Hydraulic impulse test without fiexingGB/T 5568-19941994-10-1
Unplasticized polyvinyl chloride fittings for drainage in buildingsGB/T 5836.2-19921993-8-1
Unplasticized polyvinyl chloride pipes for drainage in buildingsGB/T 5836.1-19921993-8-1
Plasticized polyvinyl chloride tubing for transport of fluidsGB/T 13527.1-19921993-3-1
Unplasticized polyvinyl chloride (PVC-) pipes-Dichloromethane testGB/T 13526-19921993-3-1
Plasticized polyvinyl chloride (PVC)tubing for medical usesGB 10010-19881989-7-1
Thermoplastics pipes and fitting - Determination of vicat softening temperatureGB/T 8802-20011989-2-1
Test method for extemal loading resistance for plastic pipeGB/T 9647-19881989-2-1
Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipesGB/T 8804.1-19881988-7-1
Method for dimension measuring of plastic pipesGB 8806-19881988-7-1
Test method for unplasticized PVC fittings by fallingGB 8801-19881988-7-1
Determination of deflection for rigid plastic pipesGB/T 8805-19881988-7-1
Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) fGB/T 8803-20011987-6-1
Back
About Us Contact Us Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 Email: coc@codeofchina.com | Send me a messageQQ: 672269886
Copyright: Codeofchina Inc 2008-2020