Title |
Standard No. |
Implemented On |
Non-copper coated wires | T/CWA 0001-2016 | |
Specification for Covered Electrodes of Stainless Steel and Superalloy for Aviation | HB 462-2008 | |
Wire electrodes,wires,rods and deposits for gas shielded arc welding of creep-resisting steels | GB/T 39279-2020 | 2021-6-1 |
Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels | GB/T 39280-2020 | 2021-6-1 |
Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels | GB/T 8110-2020 | 2021-6-1 |
Wire electrodes,wires,rods and deposits for gas shielded arc welding of high strength steels | GB/T 39281-2020 | 2021-6-1 |
Welding terminology-fusion welding | T/CWAN 0009-2018 | 2019-1-1 |
Welding terminology-welding base | T/CWAN 0008-2018 | 2019-1-1 |
Tubular cored electrodes for non-alloy and fine grain steels | GB/T 10045-2018 | 2018-12-1 |
Tubular cored electrodes for high-strength steels | GB/T 36233-2018 | 2018-12-1 |
Tubular cored electrodes for stainless steels | GB/T 17853-2018 | 2018-12-1 |
Tubular cored electrodes for creep-resisting steels | GB/T 17493-2018 | 2018-12-1 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high strength steels | GB/T 36034-2018 | 2018-10-1 |
Solid wire electrodes/flux combinations for submerged arc welding of stainless steels | GB/T 17854-2018 | 2018-10-1 |
Solid wire electrodes,tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels | GB/T 5293-2018 | 2018-10-1 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels | GB/T 12470-2018 | 2018-10-1 |
Fluxes for submerged arc welding and electroslag welding | GB/T 36037-2018 | 2018-10-1 |
Test methods for welding anti-splash agent | T/CWAN 0004-2018 | 2018-6-1 |
Methods for chemical analysis of tin-lead solders - Part 10: Determination of cadmium content - Flame atomic absorption spectrometry and Na2EDTA titration method | GB/T 10574.10-2017 | 2018-5-1 |
Methods for chemical analysis of tin-lead solders―Part 7:Determination of silver content―Flame atomic absorption spectrometry and potassium thiocyanate potentiometric titra | GB/T 10574.7-2017 | 2018-5-1 |
Non copper-plating welding electrodes and rods | T/CWAN 0001-2016 | 2016-12-1 |
Test methods for welding consumables―Part 2:Preparation of single-run and two-run technique test specimens in steel | GB/T 25774.2-2016 | 2016-9-1 |
Solid Wire Electrodes, Solid Wires and Rods for Fusion Welding of Titanium and Titanium Alloys | GB/T 30562-2014 | 2014-12-1 |
Wire electrodes,strip electrodes,wires and rods for arc welding of stainless and heat resisting steels | GB/T 29713-2013 | 2014-6-1 |
Covered electrodes for manual metal arc welding of non-alloy and fine grain steels | GB/T 5117-2012 | 2013-3-1 |
Determination of diffusible hydrogen in deposited metal | GB/T 3965-2012 | 2013-3-1 |
Stainless steel covered electrodes | GB/T 983-2012 | 2013-3-1 |
Covered electrodes for manual metal arc welding of creep-resisting steels | GB/T 5118-2012 | 2013-3-1 |
The activating fluxes for Low-carbon steel and stainless steel | JB/T 11084-2011 | 2011-11-1 |
Procurement guidelines for welding consumables | GB/T 25778-2010 | 2011-6-1 |
Preparation methods of deposited metal specimens for chemical analysis | GB/T 25777-2010 | 2011-6-1 |
Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint | GB/T 25774.3-2010 | 2011-6-1 |
Technical delivery conditions for welding consumables - Type of product dimensions tolerances and markings | GB/T 25775-2010 | 2011-6-1 |
Qualification methods of welding procedure for welding consumables | GB/T 25776-2010 | 2011-6-1 |
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel nickel and nickel alloys | GB/T 25774.1-2010 | 2011-6-1 |
Methods of measurement for ferrite content in austenitic Cr-Ni stainless steel weld metals | GB/T 1954-2008 | 2009-1-1 |
Soft soldering flux - Classification and requirements | GB/T 15829-2008 | 2009-1-1 |
Low alloy steel flux cored electrodes for arc welding | GB/T 17493-2008 | 2009-1-1 |
Nickel and Nickel alloy wires and rodes | GB/T 15620-2008 | 2009-1-1 |
Copper and copper alloy wires and rods | GB/T 9460-2008 | 2008-10-1 |
Nickel and nickel alloy covered welding electrodes | GB/T 13814-2008 | 2008-10-1 |
Aluminium and Aluminium Alloy Wires and Rods | GB/T 10858-2008 | 2008-10-1 |
Metallic powder material --Self-fluxing Ni-Cr-B-Si alloy powder | YS/T 527-2006 | 2006-10-11 |
Metallic powder material --Self-fluxing Ni-B-Si alloy powder | YS/T 526-2006 | 2006-10-11 |
Welding electrodes and rods for cast iron | GB/T 10044-2006 | 2006-9-1 |
Specification for coverd electrodes of structure steel for aviation | HB 459-2004 | 2004-6-1 |
Low-alloy steel electrodes and fluxes for submerged arc welding | GB/T 12470-2003 | 2003-11-28 |
Methods for chemical analysis of tin-lead solders-Determination of copper content | GB/T 10574.6-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of tin content | GB/T 10574.1-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-determination of copper,iron cadmium,silver,gold,arsenic,zinc,aluminium,bismuth,phosphorous content | GB/T 10574.13-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of sulphur content | GB/T 10574.12-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of cadmium content | GB/T 10574.10-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of iron content | GB/T 10574.4-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of aluminum content | GB/T 10574.9-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of silver content | GB/T 10574.7-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of arsenic content | GB/T 10574.5-2003 | 2003-8-1 |
Methods for chemical analysis of Tin-lead solders-Determination of antimony content | GB/T 10574.2-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of phosphorus content | GB/T 10574.11-2003 | 2003-8-1 |
Methods for chemical analysis of tin-lead solders-Determination of zinc content | GB/T 10574.8-2003 | 2003-8-1 |
Carbon steel flux cored electrodes for arc welding | GB/T 10045-2001 | 2002-6-1 |
Hardfacing electrodes for shielded metal arc welding | GB/T 984-2001 | 2002-6-1 |
Aluminum and aluminum-alloy electrodes for shielded metal arc welding | GB/T 3669-2001 | 2002-6-1 |
Carbon steel electrodes and fluxs for submerged arc welding | GB/T 5293-1999 | 2000-3-1 |
Stainless steel flux cored wires | GB/T 17853-1999 | 2000-3-1 |
Stainless steel electrodes and fluxs for submerged arc welding | GB/T 17854-1999 | 2000-3-1 |
Methods for chemical analysis of melted welding fluxes - The molybdenumblue photometric method for determlnation of phosphorus content | JB/T 7948.8-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The pyrolytic method for determination of calcium fluoride content | JB/T 7948.6-1999 | 2000-1-1 |
alloy powder for welding - Chemical analysis methods | JB/T 3168.3-1999 | 2000-1-1 |
alloy powder for welding - Determination of hardness and particle size | JB/T 3168.2-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The direct combustion-coulomb method for determination of total carbon content | JB/T 7948.10-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The EDTA volumetric method for determination of aluminium oxide content | JB/T 7948.4-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The EDTA volumatric method for determination of calcium oxide and magnesium oxide content | JB/T 7948.12-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The flame photometric method for determination of sodium oxide and potassium oxide content | JB/T 7948.9-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The sulfosalicylic acid photometric method for determination of iron oxide content | JB/T 7948.5-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The permanganate photome tric menthod for determination of manganese oxide content | JB/T 7948.3-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The gravimetric method for determination of silicon dioxide content | JB/T 7948.1-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The potentionmetric method for determination of manganese oxide content | JB/T 7948.2-1999 | 2000-1-1 |
alloy powder for welding - Technical condition | JB/T 3168.1-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The lead chlorofluoride - EDTA volumetric method for determination of calcium fluoride content | JB/T 7948.7-1999 | 2000-1-1 |
Methods for chemical analysis of melted welding fluxes - The direct combustion-iodimetric method for determination of sulfur content | JB/T 7948.11-1999 | 2000-1-1 |
Low alloy steel flux cored electrodes for arc welding | GB/T 17493-1998 | 1999-8-1 |
Soldering fluxes--Resin basis fluxes | GB/T 15829.2-1995 | 1996-8-1 |
Soldering fluxes-Classification, labelling and packaging | GB/T 15829.1-1995 | 1996-8-1 |
Stainless steel covered electrodes | GB/T 983-1995 | 1996-8-1 |
Coated electrodes for copper and copper alloys | GB/T 3670-1995 | 1996-5-1 |
Carbon Steel Covered Electrodes | GB/T 5117-1995 | 1996-5-1 |
Nickel and nickel alloy welding wires | GB/T 15620-1995 | 1996-5-1 |
Welding wires for gas shielding arc welding of carbon and low alloy steels | GB/T 8110-1995 | 1996-5-1 |
Wire rods for electrode | GB/T 3429-1994 | 1995-1-1 |
Reduced ilmenite powders for welding electrodes | YB/T 5141-1993 | 1994-1-1 |
Aluminium base brazing filler metals | GB/T 13815-1992 | 1993-10-1 |
base brazing filler metals | GB/T 13679-1992 | 1993-10-1 |
Nickel and nickel alloy covered welding electrodes | GB/T 13814-1992 | 1993-10-1 |
Fluxes for the submerged arc welding of low alloy steel | GB/T 12470-1990 | 1991-10-1 |
Nickel base brazing filler metals | GB/T 10859-1989 | 1990-1-1 |
Tin-lead solders-Determination of sulphur content-Oscillopolarographic method after distillation | GB/T 10574.14-1989 | 1990-1-1 |
Tin-lead solders-Determination of zinc content-Flame atomic absorption spectrophotometric method | GB/T 10574.10-1989 | 1990-1-1 |
Test method of spreadability and clearance filling ability for filler metal | GB/T 11364-1989 | 1990-1-1 |
Tin-lead solders-Determination of cadmium content-Catalytic oscillopolarographic method | GB/T 10574.12-1989 | 1990-1-1 |
Tin-lead solders-Determination of arsenic content-Molybdoantimony arsenate blue spectrophotometric | GB/T 10574.6-1989 | 1990-1-1 |
Tin-lead solders-Determination of iron content-1,10-phenanthroline spectrophotometric method | GB/T 10574.5-1989 | 1990-1-1 |
Tin-lead solders-Determination of tin content-Potassium iodate titrimetric method | GB/T 10574.1-1989 | 1990-1-1 |
Tin-lead solders-Determination of aluminium content-Chrome azurol S-polyethylene glycol oetyl phen | GB/T 10574.11-1989 | 1990-1-1 |
Tin-lead solders-Determination of copper content-2,9-dimethyl-1,10-phenanthroline spetrophotometri | GB/T 10574.7-1989 | 1990-1-1 |
Aluminum and aluminium alloy welding rods and wires | GB/T 10858-1989 | 1990-1-1 |
Tin-lead solders-Determination of phosphorus content-Phosphor-vanadium-molybdium poly acid-crystal | GB/T 10574.13-1989 | 1990-1-1 |
Welding wire and rods of copper and copper alloys | GB/T 9460-1988 | 1989-7-1 |
Determination of ferrous iron content in reduced ilmenite powder for welding rod | GB/T 8454-1987 | 1989-1-1 |
Metallic powder material; Self-fluxing Ni-B-Si alloy powder | GB/T 5315-1985 | 1986-7-1 |
Metallic powder material; Self-fluxing Ni-Cr-B-Si alloy powder | GB/T 5316-1985 | 1986-7-1 |