| Title |
Standard No. |
Implemented On |
| Stability test of lubricants for refrigeration compressors under the action of refrigerant (Phillips process) | SH/T 0104-1992 | |
| Determination of furfural in lubricating oil | SH/T 0076-1991 | |
| Determination of copper content in lubricating oil and liquid fuel (atomic absortion spectrometric method ) | SH/T 0102-1992 | |
| Determination of magnesium content in lubricating oil (atomic absorption spectrometry method) | SH/T 0061-1991 | |
| Determination of iron content in lubricating oil (atomic absorption spectrometry method) | SH/T 0077-1991 | |
| Determination of average molecular mass and molecular weight distribution of certain polymeric additive (volume exclusion chromatography) | SH/T 0108-1992 | |
| Determination of turbidity of lubricating oil and detergent | SH/T 0028-1990 | |
| Heavy duty gear oils for automobile (GL-5) | GB 13895-2018 | 2019-2-1 |
| Standard Test Method for Measurement of low-temperature Viscosity of Lubricants - Brookfield Viscometer Method | GB/T 11145-2014 | 2014-6-1 |
| Lubricants,industrial oils and related products(class L) - Classification - Part 9:Family D(Compressors) | GB/T 7631.9-2014 | 2014-6-1 |
| Lubricants, Industrial Oils and Related Products (Class L)Classification - Part 11: Family G (Slideways) | GB/T 7631.11-2014 | 2014-6-1 |
| Lubricants,industrial oils and related products(class L) - Classification - Part 12:Family Q(Heat transfer fluids) | GB/T 7631.12-2014 | 2014-6-1 |
| Criteria for changing of heavy-duty vehicle gear oil(GL-5) | GB/T 30034-2013 | 2014-5-1 |
| Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 10: Family T (Turbines) | GB/T 7631.10-2013 | 2014-5-1 |
| Determination Method for Yield Stress and Performance Viscosity of Engine Oil at Low Temperature | NB/SH/T 0562-2013 | 2013-10-1 |
| Assessment for Bearing Capacity of Lubricating Oil - Fzg Visual Observation | NB/SH/T 0306-2013 | 2013-10-1 |
| Lubricants,industrial oils and related products (class L) - Classification - Part 13: Family A (Total loss systems) | GB/T 7631.13-2012 | 2013-3-1 |
| Lubricants for refrigeration compressors | GB/T 16630-2012 | 2013-3-1 |
| Standard test method for insolubles in used lubricating oils | GB/T 8926-2012 | 2013-3-1 |
| Lubricating oils for turbines | GB 11120-2011 | 2012-6-1 |
| Gear Oils for Industrial Enclosed Gear System | GB 5903-2011 | 2012-6-1 |
| Criteria for changing of diesel engine oil | GB/T 7607-2010 | 2011-5-1 |
| Criteria for changing of gasoline engine oil | GB/T 8028-2010 | 2011-5-1 |
| Crude petroleum and liquid or solid petroleum products - Determination of density or relative density-Capillary stoppered pyknometer and graduated bicapillary pyknometer methods | GB/T 13377-2010 | 2011-5-1 |
| Determination of apparent viscosity of engine oils using the cold-cranking simulator | GB/T 6538-2010 | 2010-12-1 |
| Heat transfer fluids | GB 23971-2009 | 2010-1-1 |
| Heat transfer fluids—Determination of thermal stability | GB/T 23800-2009 | 2009-11-1 |
| In-service quality criteria of turbine oils used in power plants | GB/T 7596-2008 | 2009-8-1 |
| Detemination of clemulsibility characteristics of turbine oils in service | GB/T 7605-2008 | 2009-8-1 |
| Lubricants, industrial oils and related products (Class L) - Classification - Part 1: General | GB/T 7631.1-2008 | 2008-12-1 |
| Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry(AAS) | SH/T 0605-2008 | 2008-10-1 |
| Determination of the filterability of lubricating oils | SH/T 0805-2008 | 2008-10-1 |
| Standard test method for determination of the sludging and corrosion tendencies of inhibited mineral oils | SH/T 0565-2008 | 2008-10-1 |
| Lubricating oils-Determination of oxidation stability-Rotating pressure vessel method | SH/T 0193-2008 | 2008-10-1 |
| Standard test method for shear stability of polymer containing fluids using a european diesel injector apparatus | SH/T 0103-2007 | 2008-1-1 |
| Standard test method for measuring the effect on filterability of engine oils after treatment with various amounts of water and a long(6-h) heating time | SH/T 0791-2007 | 2008-1-1 |
| Standard test method for 2 6-di-tert-butyl-p-cresol and 2 6-di-tert-butyl phenol in electrical insulating oil by infrared absorption | SH/T 0792-2007 | 2008-1-1 |
| Standard test method for determination of homogeneity and miscibility in automotive engine oils | SH/T 0801-2007 | 2008-1-1 |
| Determination of particulate contamination in oil | DL/T 432-2007 | 2007-12-1 |
| Lubricants industrial oils and related products (class L)-Family E (internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB EGC and EGD) | GB/T 20420-2006 | 2007-1-1 |
| Diesel engine oils for agricultural use | GB 20419-2006 | 2007-1-1 |
| Diesel engine oils | GB 11122-2006 | 2007-1-1 |
| Gasoline engine oils | GB 11121-2006 | 2007-1-1 |
| Mineral paper machine circulating oil | QB/T 2766-2006 | 2006-12-1 |
| Synthetic paper machine circulating oil | QB/T 2767-2006 | 2006-12-1 |
| The flushing oil for paper machine lubricating system | QB/T 2768-2006 | 2006-12-1 |
| Standard test method for evaluation of automotive engine oils in the sequence Ⅷ spark-ignition engine (CLR oil test engine) | SH/T 0788-2006 | 2006-11-1 |
| Standard test method for evaluation of engine oils in diesel four-stroke cycle supercharged 1M-PC single cylinder oil test engine | SH/T 0786-2006 | 2006-11-1 |
| Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (CEPT-Ⅲ method) | SH/T 0783-2005 | 2006-6-1 |
| Test procedure for evaluating the performance of internal combustion engine oils (Caterpillar 1K/1N procedure) | SH/T 0782-2005 | 2006-6-1 |
| Test method for pour point of petroleum products (Automatic pressure pulsing method) | SH/T 0771-2005 | 2006-1-1 |
| Standard test method for measuring the effect on filterability of engine oils after treatment with water and dry ice and a short heating time | SH/T 0772-2005 | 2006-1-1 |
| Standard test method for evaluation of rust preventive characteristics of automotive engine oils (Ball rust test method) | SH/T 0763-2005 | 2005-9-1 |
| The test method for determination of the coefficient of friction of lubricants using the four-ball wear test machine | SH/T 0762-2005 | 2005-9-1 |
| Standard test method for evaluation of corrosiveness of diesel engine oil at 135℃ | SH/T 0754-2005 | 2005-9-1 |
| Standard test method for determination of chemical group composition in lube base oil by thin-layer chromatography | SH/T 0753-2005 | 2005-9-1 |
| Standard test method for determination of high temperature deposits by thermo-oxidation engine oil simulation test | SH/T 0750-2005 | 2005-9-1 |
| Test method for diesel engine injector nozzle coking test (XUD-9) | SH/T 0764-2005 | 2005-9-1 |
| Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer | SH/T 0751-2005 | 2005-9-1 |
| Water-cooled two-stroke-cycle gasoline engine oils | SH/T 0676-2005 | 2005-9-1 |
| Standard test method for evaluation of diesel engine oils in T-8 diesel engine | SH/T 0760-2005 | 2005-9-1 |
| Standard test method for evaluation of diesel engine oils in T-9 diesel engine | SH/T 0761-2005 | 2005-9-1 |
| Standard test method for low temperature low shear rate viscosity/temperature dependence of lubricating oils using a temperature - scanning technique | SH/T 0732-2004 | 2004-9-1 |
| Standard test method for evaporation loss of lubricating oils by thermo gravimetric analyzer (TGA) Noack method | SH/T 0731-2004 | 2004-9-1 |
| Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry | SH/T 0749-2004 | 2004-9-1 |
| Test method for thermal stability of lubricant | SH/T 0560-1993 | 2004-3-1 |
| Standard test method for carbon-type composition of insulating oils of petroleum origin | SH/T 0725-2002 | 2003-5-1 |
| Criteria for change of engine oil used in diesel engine | GB/T 7607-2002 | 2003-4-1 |
| Standard test method for high temperature foaming characteristics of lubricating oils | SH/T 0722-2002 | 2002-7-1 |
| Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC) | SH/T 0719-2002 | 2002-7-1 |
| Quality fast test method for lubricating oil | NY/T 512-2002 | 2002-2-1 |
| Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oil (EGD) | SH/T 0710-2001 | 2002-1-1 |
| Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (OMC 70HP) | SH/T 0708-2001 | 2002-1-1 |
| Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (Mercury 15HP) | SH/T 0709-2001 | 2002-1-1 |
| Test method for miscibility of refrigerator oils with refrigerants | SH/T 0699-2000 | 2001-5-1 |
| Sealed glass tube method to test chemical stability of refrigerator oils for use within refregerant systems | SH/T 0698-2000 | 2001-5-1 |
| Determination of oxidation stability of inhibited turbine oils | SH/T 0124-2000 | 2001-5-1 |
| Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers | SH/T 0691-2000 | 2000-12-1 |
| Quality standard for in-service sealing oil of generator using hydrogen as a coolant | DL/T 705-1999 | 2000-7-1 |
| Test method for autoignition temperature of fire-resistant fluid used for power plant | DL/T 706-1999 | 2000-7-1 |
| Air-cooling two-stroke-cycle gasoline engine oil | SH/T 0675-1999 | 2000-4-1 |
| Quality criteria of turbine oils in service for power plants | GB/T 7596-2000 | 2000-1-2 |
| Engine oils－Determination of apparent viscosity－Using the cold-cranking simulator | GB/T 6538-2000 | 2000-1-1 |
| Lubricants-Determinaitoin of extreme pressure propertiles-Four ball method | GB/T 12583-1998 | 1999-5-1 |
| Test method for miscibility with gasoline and fluidity of two - stroke - cycle gasoline engine lubricants | SH/T 0671-1998 | 1999-4-1 |
| Lubricants and related products (class L) - Family M(metalworking) - Guidelines for establishing specifications | SH/T 0665-1998 | 1998-12-1 |
| 321 extreme pressure additive | SH/T 0664-1998 | 1998-12-1 |
| Marine lubricating oils - Test method of corrosiveness | SH/T 0649-1997 | 1998-7-1 |
| Dicsel engine oils | GB 11122-1997 | 1998-4-1 |
| Exhaust system blocking test procedure for evaluating air-cooled two-stroke gasoline engine oils | SH/T 0669-1998 | 1998-4-1 |
| Diesel engine oils L-ECD | GB 11123-1989 | 1998-4-1 |
| Lubricity test procedure for evaluating air-cooled two-stroke gasoline engine oils | SH/T 0668-1998 | 1998-4-1 |
| Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oils | SH/T 0667-1998 | 1998-4-1 |
| Standard test method for determination of lubricity of water-cooled two-stroke gasoline engine oils | SH/T 0670-1998 | 1998-4-1 |
| Lubricants test method for evaluating exhaust gas smoke of air-cooled two-stroke gasotine engine | SH/T 0646-1997 | 1997-12-1 |
| Lubricants test method for evaluating preignition tendency of water-cooled two-stroke gasoline engine | SH/T 0647-1997 | 1997-12-1 |
| Lubricants test method for determination of detergence of diesel engine - Hot tube method | SH/T 0645-1997 | 1997-12-1 |
| Lubricants test method for evaluating detergence and general performance of water-cooled two-stroke gasoline engine | SH/T 0648-1997 | 1997-12-1 |
| Damping greases for potentiometer | SH/T 0640-1997 | 1997-12-1 |
| Anti-ammonia Turbine Oil | SH/T 0362-1996 | 1996-12-1 |
| Gasoline engine oils | GB 11121-1995 | 1996-8-1 |
| Oil changing criterion for motorcar diesel engine oil in use | GB/T 7607-1995 | 1995-12-1 |
| Gear oils for industrial enclosed gear drives(mild EP) | GB 5903-1995 | 1995-12-1 |
| Determination method for lead content in lubricant (atomic absorption spectrometry method) | SH/T 0617-1995 | 1995-10-1 |
| Determination method for chlorine content of engine coolant | SH/T 0621-1995 | 1995-10-1 |
| No.10 instrument oil | SH/T 0138-1994 | 1995-7-1 |
| Hydraulic oils L-HL | GB 11118-1989 | 1994-12-1 |
| Determination method for undissoloved substance content of refrigerant oil R12 | SH/T 0603-1994 | 1994-10-1 |
| Guide for maintenance and supervision of inservice turbine mineral oil used for power plants | GB/T 14541-1993 | 1994-5-1 |
| Heavy duty gear oil for automobile(GL-5) | GB 13895-1992 | 1993-11-1 |
| Evaluation method for evaluation of automotive engine oil for inhibition of oxidization and wear under high-temperature condition (MS Sequence-III D Method) | SH/T 0513-1992 | 1993-7-1 |
| Test method for evaluation of low temperature deposits of gasoline engine oils (MS Sequence V D method) | SH/T 0514-1992 | 1993-7-1 |
| Scoring methods for detergency of gasoline engine oil | SH/T 0510-1992 | 1993-7-1 |
| Property evaluation of QD gasoline engine oil (Procedure II, III and V method) | SH/T 0516-1992 | 1993-7-1 |
| Property evaluation of QC gasoline engine oil (Sequences II, III and V method) | SH/T 0515-1992 | 1993-7-1 |
| Thermosetting Molybdenum Disulfide Dry Film Lubricant | HB 6688-1992 | 1993-5-1 |
| Test method for trace copper in oil (spectrophotometric method by Zinc reagent ) | DL/T 430-1992 | 1993-3-1 |
| Worm Gear Oil | SH/T 0094-1991 | 1992-12-1 |
| Lubricants and related products (class L) - Classification - Part 10: Family T (Turbines) | GB 7631.10-1992 | 1992-12-1 |
| Determination method for friction coefficient of liquid lubricant (oscillator method) | SH/T 0072-1991 | 1992-7-1 |
| Determination method for barium, calcium and zinc content in lubricant (atomic absorption spectrometry method) | SH/T 0228-1992 | 1992-5-20 |
| Determination method for deemulsification time of lubricant | SH/T 0256-1992 | 1992-5-20 |
| Determination method for calcium, barium and zinc content in doped lubricant (complexometric titration ) | SH/T 0309-1992 | 1992-5-20 |
| Determination method for lubricant abradability (Falex axle and V-shape lump method) | SH/T 0188-1992 | 1992-5-20 |
| Determination method for oxidation property of extreme pressure lubricant | SH/T 0123-1993 | 1992-5-20 |
| Determination of phenol content in phenol refined lubricating oils | SH/T 0120-1992 | 1992-5-20 |
| Determination Method for Air Release Value of Lubricating oils | SH/T 0308-1992 | 1992-5-20 |
| Test method for storage stability of liquid lubricant | SH/T 0451-1992 | 1992-5-20 |
| Determination method for moisture stability of lubricant | SH/T 0257-1992 | 1992-5-20 |
| Crankcase simulation test (QZX method) | SH/T 0300-1992 | 1992-5-20 |
| Test method for sodium hydroxide extraction acidification of lubricant | SH/T 0267-1992 | 1992-5-20 |
| Determination method for extreme pressure property of lubricant (Falex Method) | SH/T 0187-1992 | 1992-5-20 |
| Determination method for colour of lubricant | SH/T 0258-1992 | 1992-5-20 |
| Special #3, 4, 5, 14 and -16 precision instrument oil | SH/T 0454-1992 | 1992-5-20 |
| Assessment method for high temperature oxidation and bearing bush corrosion of internal combustion engine oil (L-38 method) | SH/T 0265-1992 | 1992-5-20 |
| Evaluation of high temperature oxidation and bearing bush corrosion of internal combustion engine oil (Pitt W-1 method) | SH/T 0264-1992 | 1992-5-20 |
| Determination method for thermal oxidation stability of lubricant | SH/T 0259-1992 | 1992-5-20 |
| Test method of antiammonia performance of antiammonia turbine oil | SH/T 0302-1993 | 1992-5-20 |
| Determination method for water soluble acid of lubricant containing corrosion inhibitor (pH value method) | SH/T 0298-1992 | 1992-5-20 |
| Determination method for iron content in petroleum products | SH/T 0197-1992 | 1992-5-20 |
| Determination method for oxidation stability of internal combustion engine oil | SH/T 0299-1992 | 1992-5-20 |
| No.4122 high-temperature instrument oil | SH/T 0465-1992 | 1992-5-20 |
| Determination method for channel point of automotive gear lubricant | SH/T 0030-1990 | 1992-4-1 |
| Determination of precipitation number for lubricating oil | SH/T 0024-1990 | 1992-4-1 |
| Lubricant for heat-setting machine | SH/T 0010-1990 | 1992-4-1 |
| Determination of Dissolution Characteristics in Storage Process of Gear Lubricant | SH/T 0037-1990 | 1992-4-1 |
| Air compressor oils | GB 12691-1990 | 1991-11-1 |
| Air compressor oils | GB/T 12691-1990 | 1991-11-1 |
| Aviation jet engine lubricating oils Transformer oils | GB 439-1990 | 1991-11-1 |
| Lubricating oil-Determinaiton of flow ability-U -tube method | GB/T 12578-1990 | 1991-10-1 |
| Lubricating oils--Determination of foaming characteristics | GB/T 12579-1990 | 1991-10-1 |
| Refrigerator oils-Determination of floc point | GB/T 12577-1990 | 1991-10-1 |
| White oil for food-machinery | GB 12494-1990 | 1991-7-10 |
| White oil for food-machinery | GB/T 12494-1990 | 1991-7-10 |
| Lubricating fluids; Measurement of extreme pressure properties; Timken method | GB/T 11144-1989 | 1990-4-1 |
| Lubricating oils for total loss systems L-AN | GB 443-1989 | 1990-4-1 |
| Turbine oils L-TSA | GB 11120-1989 | 1990-4-1 |
| test method for evaluating the performance of in - Ternal combustion engine oil (Caterpillar 1G2 method) | GB 9933-1988 | 1989-9-1 |
| test method for evaluating the performance of in - Ternal combustion engine oil (Caterpillar 1H2 method) | GB 9932-1988 | 1989-9-1 |
| Engine oil-Determination of borderline pumping temperature | GB 9171-1988 | 1989-4-1 |
| Engine oil-Determination of borderline pumping temperature | GB/T 9171-1988 | 1989-4-1 |
| Lubricating oils and fuel oils-Determination of total nitrogen-Modified kjeldahl method | GB 9170-1988 | 1989-4-1 |
| Used lubricating oils-Determination of insolubles | GB 8926-1988 | 1989-2-1 |
| Determination of clemulsibility characteristics of turbine oils in service | GB 7605-1987 | 1988-1-1 |
| Lubricating oils; Determination of demulsibility characteristics | GB 8022-1987 | 1987-1-26 |
| Lubricants for light duty rotary oil-flooded air compressor | GB 5904-1986 | 1986-12-1 |
| Lubricants for light duty rotary oil-flooded air compressor | GB/T 5904-1986 | 1986-12-1 |
| Lubricants;Determination of load carrying capacity(four balls method) | GB/T 3142-1982 | 1983-3-1 |
| Lubricants;Determination of load carrying capacity(four balls method) | GB 3142-1982 | 1983-3-1 |
| Aviation lubricating oil No.20 | GB 440-1977(1988) | 1978-1-1 |
| Aviation lubricating oil No.20 | GB 440-1977 | 1978-1-1 |
| Determination of corrosion of engine lubricating oils | GB/T 391-1977 | 1978-1-1 |
