| Title |
Standard No. |
Implemented On |
| Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 2:Construction installation and commissioning acceptance | GB/T 37159.2-2019 | 2019-10-1 |
| Petroleum and natural gas industries―Downhole equipment―Completion accessories | GB/T 35148-2017 | 2018-7-1 |
| Petroleum and natural gas industries―Flexible couplings for mechanical power transmission―General purpose applications | GB/T 35147-2017 | 2018-7-1 |
| Criterion for electrical equipment for oil drilling rig―Part 4:Auxiliary power equipment and circuits for well site | GB/T 23507.4-2017 | 2018-7-1 |
| Criterion for electrical equipment for oil drilling rig―Part 1:Main motors | GB/T 23507.1-2017 | 2018-7-1 |
| Criterion for electrical equipment for oil drilling rig―Part 2:Control system | GB/T 23507.2-2017 | 2018-7-1 |
| Petroleum and natural gas industries-Threading,gauging and thread inspection of casing,tubing,and line pipe threads | GB/T 9253.2-2017 | 2018-5-1 |
| Marine seismic digital streamer system--Part 2: Standards for specifying hydrophone streamer-cable characteristic | GB/T 24261.2-2017 | 2018-4-1 |
| Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation | GB/T 33581-2017 | 2017-12-1 |
| Petroleum and natural gas industries―Steel pipes for use as casing or tubing for wells | GB/T 19830-2017 | 2017-12-1 |
| Petroleum and natural gas industries―Procedures for testing casing and tubing connections | GB/T 21267-2017 | 2017-12-1 |
| Criterion for electrical equipment for oil drilling rig―Part 3:The diesel generating set for electric drilling rig | GB/T 23507.3-2017 | 2017-9-1 |
| Recommended practice for riser fatigue | GB/T 33508-2017 | 2017-9-1 |
| The gas-fuel power set for oil pruduction drilling site | GB/T 23506-2017 | 2017-9-1 |
| Cement head and common cementing plug | SY/T 7084-2016 | 2016-6-1 |
| Special purpose pumps | SY/T 7083-2016 | 2016-6-1 |
| High strain SAWL steel line pipe for strain-based design pipelines | SY/T 7042-2016 | 2016-6-1 |
| High pressure fiberglass tubing for petroleum and natural gas industries | SY/T 7043-2016 | 2016-6-1 |
| Petroleum and natural gas infustries. Drilling and production equipment. Liquid nitrogen pumping equipment | SY/T 7087-2016 | 2016-6-1 |
| Petroleum and natural gas industries. Drilling and production equipment. Fracturing pumping equipment | SY/T 7086-2016 | 2016-6-1 |
| Petroleum and natural gas industries―Drilling and well servicing equipment | GB/T 17744-2015 | 2016-4-1 |
| Petroleum and natural gas industries―Progressing cavity pump systems for artificial lift―Part 1:Pumps | GB/T 21411.1-2014 | 2015-10-1 |
| Top drive drilling equipment for oil drilling rigs | GB/T 31049-2014 | 2015-10-1 |
| Petroleum and natural gas industries―Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock―Technical delivery conditions | GB/T 23802-2015 | 2015-9-1 |
| Petroleum and natural gas industries―Evaluation and testing of thread compounds for use with casing,tubing,line pipe and drill stem elements | GB/T 23512-2015 | 2015-9-1 |
| Petroleum and natural gas industries-Non-destructive testing (NDT) methods of steel tubes－Part 5: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections | SY/T 6423.5-2014 | 2015-3-1 |
| Site installation and inspection for drilling rigs | SY/T 6586-2014 | 2015-3-1 |
| Petroleum and Natural Gas Industries - Drilling and Production Hoisting Equipment | GB/T 19190-2013 | 2014-10-1 |
| Petroleum and Natural Gas Industries - Design and Operation of Subsea Production Systems - Part 4: Subsea Wellhead and Tree Equipment | GB/T 21412.4-2013 | 2014-10-1 |
| Petroleum and Natural Gas Industries - Drilling and Production Equipment - Wellhead and Christmas Tree Equipment | GB/T 22513-2013 | 2014-10-1 |
| Petroleum and Natural Gas Industries - Drilling and Production Equipment - Part 1: Design and Operation of Marine Drilling Riser Equipment | GB/T 30217.1-2013 | 2014-10-1 |
| Recommended Practice for the Application of Electrical Submersible Cable System | GB/T 17389-2013 | 2014-10-1 |
| Mobile Drilling Rig | GB/T 30216-2013 | 2014-10-1 |
| Petroleum Drilling and Workover Rigs for Low Temperature Conditions | SY/T 6958-2013 | 2014-4-1 |
| Hardbanding for Petroleum Drilling Tool | SY/T 6948-2013 | 2014-4-1 |
| Through Casing Resistivity Logging Tool | SY/T 6972-2013 | 2014-4-1 |
| Multi-parameter Drilling Instrumentation Testing Equipment | SY/T 6971-2013 | 2014-4-1 |
| Thermal Casing String for Strain-based Design—Part3: Procedure for Applicability Evaluation Tests | SY/T 6952.3-2013 | 2014-4-1 |
| Continuous Sucker Rod | SY/T 6585-2013 | 2014-4-1 |
| Specification for Drilling Fluid Testing Instruments | SY/T 5377-2013 | 2014-4-1 |
| Swivel for Petroleum Drilling and Workover Rigs | SY/T 5530-2013 | 2014-4-1 |
| Fluid Coupling Set for Oil Drilling Rig | SY/T 6664-2013 | 2014-4-1 |
| Quality Assessment Method for Oil Country Tubular Goods | SY/T 5539-2013 | 2014-4-1 |
| Corrosion-resistant Alloy Casing and Tubing | SY/T 6950-2013 | 2014-4-1 |
| Petroleum and Natural Gas Industry—Diesel/natural Gas Dual-fuel Engine | SY/T 6728-2013 | 2014-4-1 |
| Technical Specification for Special Tubular Goods in Petroleum and Natural Gas Industries—Part2: Drill Pipe Used in Horizontal Directional Drilling | SY/T 6896.2-2013 | 2014-4-1 |
| Thermal Casing String for Strain-based Design—Part2: Casing | SY/T 6952.2-2013 | 2014-4-1 |
| Solid Expandable Tubular | SY/T 6951-2013 | 2014-4-1 |
| Petroleum Core Induced Polarization Potential Measurement Instrument | SY/T 6973-2013 | 2014-4-1 |
| Truck-mounted Reciprocating Compressor Set Used in Oil and Gas Fields | SY/T 6961-2013 | 2014-4-1 |
| Specifications for offshore modular drilling rigs on fixed platforms—Part 3:Hook-up,commissioning and acceptance | GB/T 29549.3-2013 | 2014-1-1 |
| Specifications for offshore modular drilling rigs on fixed platforms—Part 3:Hook-up,commissioning and acceptance | GB/T 29549.1-2013 | 2014-1-1 |
| Specifications for offshore modular drilling rigs on fixed platforms—Part 2:Construction | GB/T 29549.2-2013 | 2014-1-1 |
| Petroleum and natural gas industries—Steel drill pipe | GB/T 29166-2012 | 2013-7-1 |
| Petroleum and natural gas industries－Inspection and classification of used drill stem elements | GB/T 29169-2012 | 2013-7-1 |
| Petroleum and natural gas industries—Beam pumping units | GB/T 29021-2012 | 2013-7-1 |
| CBM drilling rig | SY/T 6914-2012 | 2012-12-1 |
| Test equipment for petroleum electronic pressure gauge | SY/T 6909-2012 | 2012-12-1 |
| Petroleum and natural gas industries--Drilling and production equipment--Part1:Side-pocket mandrel | SY/T 6915.1-2012 | 2012-12-1 |
| Coating specification for petroleum drilling and servicing rigs | SY/T 6919-2012 | 2012-12-1 |
| Make-up and break-out test procedure of drilling tools | SY/T 6897-2012 | 2012-12-1 |
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1：Rotary drill stem elements | GB/T 22512.1-2012 | 2012-7-1 |
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment | GB/T 28259-2012 | 2012-7-1 |
| Petroleum and natural gas industries—Equations and calculations for the properties of casing,tubing,drill pipe and line pipe used as casing and tubing | GB/T 20657-2011 | 2012-6-1 |
| Gas leaking inspection system for casing and tubing connection thread | SY/T 6872-2012 | 2012-3-1 |
| Oil and gas industry—Downhole tool used in the—Downhole deployment valve | SY/T 6869-2012 | 2012-3-1 |
| Installation adjustment and maintenace of top drive drilling equipment for oil drilling rigs | SY/T 6870-2012 | 2012-3-1 |
| Specification for installation,use,care and maintenance of solids control equipments of oil drilling fluid | SY/T 6871-2012 | 2012-3-1 |
| Operation,maintenance,repair and inspection of high pressure manifolds for drilling and production operation | SY/T 6270-2012 | 2012-3-1 |
| Hydraulic transmission used for oilfield equipment | SY/T 6873-2012 | 2012-3-1 |
| Mobile drilling rig | SY/T 6584-2012 | 2012-3-1 |
| Brake block for drilling rig | SY/T 5023-2012 | 2012-3-1 |
| High frequency electrical resistance welding steel pipes for use as casing | SY/T 5989-2012 | 2012-3-1 |
| Eccentric casing roller | SY/T 5056-2012 | 2012-3-1 |
| Recommended practice for use and procedures for inspections,maintenance and repair of drilling and well servicing structures | SY/T 6408-2012 | 2012-3-1 |
| Junk baskets | SY/T 5084-2012 | 2012-3-1 |
| Calibration method of drilling bit gauge | SY/T 6861-2012 | 2012-3-1 |
| Recommended practices for blowout prevention equipment systems for drilling wells | SY/T 6868-2012 | 2012-3-1 |
| Criterion for electrical equipment for oil drilling rig. Part 4:Auxiliary power equipment and circuits for well site | SY/T 6725.4-2012 | 2012-3-1 |
| Site installation and inspection for drilling rigs | SY/T 6586-2012 | 2012-3-1 |
| Specification for CRA clad or lined steel pipe | SY/T 6623-2012 | 2012-3-1 |
| Power tongs and tongs for drilling and well servicing | SY/T 5074-2012 | 2012-3-1 |
| Petroleum and natural gas industries—Drilling and production equipment—Ground oil-gas transportation pump | GB/T 26507-2011 | 2011-10-1 |
| Petroleum and natural gas industries—Care and use of casing and tubing | GB/T 17745-2011 | 2011-10-1 |
| Specification for drill string non-return valve | GB/T 25429-2010 | 2011-3-1 |
| Electric submersible pump installations | GB/T 17388-2010 | 2011-3-1 |
| Recommended practice for electrical submersible pump teardown report | GB/T 17390-2010 | 2011-3-1 |
| Specification for drill through equipment—Rotating control devices | GB/T 25430-2010 | 2011-3-1 |
| Petroleum and natural gas industries—Drilling and production equipment—Drilling and well-servicing structures | GB/T 25428-2010 | 2011-1-1 |
| The operating and maintenance of petroleum workover rig | SY/T 6117-2010 | 2010-12-15 |
| Marine seismic digital streamer system—Part 3:Central recording system | GB/T 24261.3-2010 | 2010-12-1 |
| Marine seismic digital streamer system - Part 2: Standards for specifying hydrophone streamer-cable characteristic | GB/T 24261.2-2010 | 2010-12-1 |
| Integral drill pipe joints | SY/T 6762-2009 | 2010-5-1 |
| Drilling slip | SY/T 5049-2009 | 2010-5-1 |
| Overshot for Drilling and Servicing | SY/T 5068-2009 | 2010-5-1 |
| The upper and lower kelly cock of the rotary equipment on drilling industry | SY/T 5525-2009 | 2010-5-1 |
| Fracturing unit | SY/T 5211-2009 | 2010-5-1 |
| Spear for drilling and servicing | SY/T 5069-2009 | 2010-5-1 |
| Sizing and selection of electric submersible pump installations | GB/T 17386-2009 | 2010-1-1 |
| The natural gas power set for oil pruduction drilling site | GB/T 23506-2009 | 2010-1-1 |
| Criterion for electriacl equipment for oil drilling rig - Part 3: The diesel generating set for electric drilling rig | GB/T 23507.3-2009 | 2010-1-1 |
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems | GB/T 21411.2-2009 | 2010-1-1 |
| Petroleum drilling and workover rigs | GB/T 23505-2009 | 2010-1-1 |
| Petroleum and natural gas industries―Corrosion-resistant alloy seamless tubes for use as casing,tubing and coupling stock―Technical delivery conditions | GB/T 23802-2009 | 2009-12-1 |
| Drilling weight indicating system | GB/T 24263-2009 | 2009-12-1 |
| General specifications for routine core analysis instruments | GB/T 23804-2009 | 2009-12-1 |
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing tubing and line pipe | GB/T 23512-2009 | 2009-11-1 |
| Petroleum and natural gas industries - Rotary drilling equiment - Part 2: Threading and gauging of rotary shouldered thread connections | GB/T 22512.2-2008 | 2009-5-1 |
| Specification for subsurface sucker rod pumps and fittings | GB/T 18607-2008 | 2009-5-1 |
| Natural gas generating set for the petroleum industry | GB/T 22343-2008 | 2009-3-1 |
| Petroleum and natural gas industries - Drilling and well servicing equipment | GB/T 17744-2008 | 2009-3-1 |
| Petroleum and natural gas industries - Subsurface safety valve systems - Design installation operation and redress | GB/T 22342-2008 | 2009-3-1 |
| Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing | GB/T 19831.2-2008 | 2009-3-1 |
| Electrical Submersible Pump Units | GB/T 16750-2008 | 2009-3-1 |
| Specification for fire test for valves with automatic backseats | SY/T 6746-2008 | 2008-12-1 |
| Specification for fire test for end connection | SY/T 6745-2008 | 2008-12-1 |
| Hydraulic disk brake for drilling rig | SY/T 6727-2008 | 2008-12-1 |
| Blue elephant | SY/T 6729-2008 | 2008-12-1 |
| Technical specifications of downhole instrument series for production logging-Part 1:Production profile | SY/T 6737.1-2008 | 2008-12-1 |
| Formation tester | SY/T 5066-2008 | 2008-12-1 |
| Technical specifications of drilling parameter monitor | SY/T 6739-2008 | 2008-12-1 |
| Engineering seismic instrument | SY/T 6145-2008 | 2008-12-1 |
| Recommended practice for selection and use of casing and tubling | SY/T 6268-2008 | 2008-12-1 |
| General specifications for core capillary pressure apparatus | SY/T 6738-2008 | 2008-12-1 |
| Well cleanout equipment | SY/T 5962-2008 | 2008-12-1 |
| Technical specifications of line kilo-newton·meter instrument | SY/T 5680-2008 | 2008-12-1 |
| Technical specifications of driling fluid balance for density | SY/T 5381-2008 | 2008-12-1 |
| Logging cable trucks | SY/T 5073-2008 | 2008-12-1 |
| Safety joint | SY/T 5067-2008 | 2008-12-1 |
| Oilfield special tank-carring truck | SY/T 5250-2008 | 2008-12-1 |
| Seismic exploration cable | SY/T 5192-2008 | 2008-12-1 |
| Logging and testing equipment | SY/T 5079-2008 | 2008-12-1 |
| Sucker rod elevators | SY/T 5235-2008 | 2008-12-1 |
| Top drive drilling system for oil drilling rigs | SY/T 6726-2008 | 2008-12-1 |
| Tricone bits | SY/T 5164-2008 | 2008-12-1 |
| Snubbing equipment | SY/T 6731-2008 | 2008-12-1 |
| Basic Configuration for Drilling and Well Servicing Rigs | SY/T 6724-2008 | 2008-12-1 |
| Check and maintenance of blowout preventer | SY/T 6160-2008 | 2008-12-1 |
| Pneumatic spider for well servicing | SY/T 6113-2008 | 2008-12-1 |
| Taper tap and die collar for fishing | SY/T 5114-2008 | 2008-12-1 |
| Vibration absorber for drilling string | SY/T 6347-2008 | 2008-12-1 |
| Wax removal equipemnt | SY/T 5961-2008 | 2008-12-1 |
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps | GB/T 21411.1-2008 | 2008-7-1 |
| Petroleum and netural gas industries - Downhole equipment - Lock mandrels and landing nipples | GB/T 21410-2008 | 2008-7-1 |
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections | GB/T 21267-2007 | 2008-6-1 |
| Specification for control systems for drilling well control equipment and control systems for diverter equipment | SY/T 5053.2-2007 | 2008-3-1 |
| Specification for solids control equipments of drilling fluid | SY/T 5612-2007 | 2008-3-1 |
| Practice for selection and use of drill pipe and drill collar | SY/T 6288-2007 | 2008-3-1 |
| Drill collar | SY/T 5144-2007 | 2008-3-1 |
| Technical specifications for petroleum mud logging unit | SY/T 5190-2007 | 2008-3-1 |
| Technical specifications of measurement while dirlling | SY/T 6702-2007 | 2008-3-1 |
| General specifications for core flowing system | SY/T 6703-2007 | 2008-3-1 |
| Technical specifications of pumping well tester | SY/T 5166-2007 | 2008-3-1 |
| Universal speciafications for oilfield special vehicles | SY/T 5534-2007 | 2008-3-1 |
| Petroleum and natural gas industries—Material for use in H2S-containing environments in oil and gas production—Part 1:General principles for selection of cracking resistant materials | GB/T 20972.1-2007 | 2007-11-1 |
| Petroleum and natural gas industries—Downhole equipment—Packers and bridge plugs | GB/T 20970-2007 | 2007-11-1 |
| Petroleum and natural gas industries—Performance testing of cementing float equipment | GB/T 20971-2007 | 2007-11-1 |
| Petroleum and natural gas industries - Aluminium alloy drill pipe | GB/T 20659-2006 | 2007-5-1 |
| Specification on end closures connectors and swivels | SY/T 6669-2006 | 2007-4-1 |
| Specification for Oil-Field V-Belt | SY/T 6665-2006 | 2007-4-1 |
| Recommended practice for diverter systems equipment and operations | SY/T 6667-2006 | 2007-4-1 |
| Drilling fluid recurrence manifold | SY/T 5244-2006 | 2007-4-1 |
| The reliability maintainability prediction on equipment of oil field drilling and production | SY/T 6295-2006 | 2007-4-1 |
| Specification for independent wellhead equipment | SY/T 6663-2006 | 2007-4-1 |
| Installation and lubrication of beam pumping units | SY/T 6668-2006 | 2007-4-1 |
| Combination installation adjustment and maintenance of well-control equipments | SY/T 5964-2006 | 2007-1-1 |
| Cementing specifications Part 2:Special cementing | SY/T 5374.2-2006 | 2007-1-1 |
| Technical specifications of multi-parameter monitoring instrument of drilling/servicing rig | SY/T 5097-2006 | 2007-1-1 |
| Measurement and inspection for directional surveying instruments - Part 1: Wireless measurement while drilling | SY/T 5416.1-2006 | 2007-1-1 |
| Petroleum and natural gas industries—Life cycle costing—Part 3:Implementation guidelines | GB/T 19829.3-2006 | 2006-9-1 |
| Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment | GB/T 20172-2006 | 2006-9-1 |
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment | GB/T 20174-2006 | 2006-9-1 |
| Petroleum and natural gas induxtries - Life cycle costing - Part 2 : Guidance on application of methodology and calculation methods | GB/T 19829.2-2005 | 2006-1-1 |
| Petroleum and natural gas industries - Drilling and production equipment - Inspection,maintenance,repair and remanufacture of hoisting equipment | GB/T 19832-2005 | 2006-1-1 |
| Petroleum and natural gas industries - Life cycle costing - Part 1 : Methodology | GB/T 19829.1-2005 | 2006-1-1 |
| Petroleum and natural gas industries—Casing centralizers—Part 1:Bow-spring casing centralizers | GB/T 19831.1-2005 | 2006-1-1 |
| Recommended practice for drilling fluid processing systems evaluation | SY/T 6622-2005 | 2005-10-1 |
| Specification for electric motor prime mover for beam unit service | SY/T 6636-2005 | 2005-10-1 |
| Liner hanger and tie-back assembly | SY/T 5083-2005 | 2005-10-1 |
| Electronic survey system | SY/T 6626-2005 | 2005-10-1 |
| CJT economical package of pumping unit | SY/T 5226-2005 | 2005-10-1 |
| Choke and kill systems | SY/T 5323-2004 | 2004-11-1 |
| Codes for conventional workover job -- Part 11: Milling operation of packer and bridge plug | SY/T 5587.11-2004 | 2004-11-1 |
| Power tongs for petroleum drilling and well servicing | SY/T 5074-2004 | 2004-11-1 |
| Recommended practice on application and testing of electric submersible pump seal chamber sections | SY/T 6598-2004 | 2004-11-1 |
| Recommended practice for use and procedures for inspections maintenance and repair of drilling and well servicing structures | SY/T 6408-2004 | 2004-11-1 |
| Recommended practice for fatigue strength analysis of offshore steel structures | SY/T 10049-2004 | 2004-11-1 |
| Recommended practice for planning designing and constructing floating production systems | SY/T 10029-2004 | 2004-11-1 |
| Cement head and cementing plug | SY/T 5394-2004 | 2004-11-1 |
| Ground core gamma spectrometer | SY/T 6603-2004 | 2004-11-1 |
| Recommended practice for electric submersible pump testing | SY/T 6599-2004 | 2004-11-1 |
| Recommended practice for planning designing and constructing fixed offshore platforms -- working stress design | SY/T 10030-2004 | 2004-11-1 |
| Elevator links, elevators and tongs | SY/T 5035-2004 | 2004-11-1 |
| Petroleum equipment--Thread gages for rotary shouldered connections | GB/T 4749-2003 | 2004-1-1 |
| Fracturing unit | SY/T 5211-2003 | 2003-8-1 |
| Environmental test and reliability for geophysical exploration instrument | SY/T 6541-2003 | 2003-8-1 |
| Beam pumping units | SY/T 5044-2003 | 2003-8-1 |
| Mobile drilling rig | SY/T 6584-2003 | 2003-8-1 |
| The operating and maintenance of petroleum workover rig | SY/T 6117-2003 | 2003-8-1 |
| Core particle sizer | SY/T 6542-2003 | 2003-8-1 |
| Cutters for drilling and servicing | SY/T 5070-2002 | 2002-8-1 |
| Progressing cavity pumps | SY/T 5549-2002 | 2002-8-1 |
| Specification for subsurface sucker rod pumps and fittings | GB/T 18607-2001 | 2002-8-1 |
| Special coring tools | SY/T 5414-2002 | 2002-8-1 |
| Oil drill rig of DS series eddy current brake | SY/T 5533-2002 | 2002-8-1 |
| Drill-stem subs | SY/T 5200-2002 | 2002-8-1 |
| The calibration method for induced polarization instrument | SY/T 6532-2002 | 2002-8-1 |
| Cementing truck | SY/T 5611-2001 | 2002-1-1 |
| Kellys | SY/T 6509-2000 | 2001-6-1 |
| Pressure-volume-temperature (PVT) cell | SY/T 6481-2000 | 2001-6-1 |
| Data transmission cable tester | SY/T 6482-2000 | 2001-6-1 |
| Universal couplings for oil drilling rig | SY/T 6497-2000 | 2001-6-1 |
| Sucker rod hook | SY/T 5236-2000 | 2001-6-1 |
| Spiral submerged arc-welded steel pipe piles | SY/T 5040-2000 | 2001-6-1 |
| Series 190 natural gas engine for the petroleum and natural gas industry | SY/T 5641-2000 | 2001-6-1 |
| Main hoisting equipment for petroleum workover | SY/T 5208-2000 | 2001-6-1 |
| Perforating gun for oil and gas well | SY/T 5562-2000 | 2001-6-1 |
| Fracturing blender truck | SY/T 5287-2000 | 2001-6-1 |
| Diamond drilling bits and diamond core bits | SY/T 5217-2000 | 2001-6-1 |
| Computerized logging system data record format | SY/T 6483-2000 | 2001-6-1 |
| Operation maintenance and management for positive displacement mud motor | SY/T 5547-2000 | 2001-6-1 |
| The technical conditions for nickel-phosphorus plating through autocatalytic process of tubings | SY/T 6478-2000 | 2000-10-1 |
| Overshot for drilling and servicing | SY/T 5068-2000 | 2000-10-1 |
| Tests of electric submersible pump system vibration | GB/T 18051-2000 | 2000-10-1 |
| Magnetic fishing tolls | SY/T 5147-2000 | 2000-10-1 |
| Rules For Building and Classing Single Point Moorings | SY/T 10032-2000 | 2000-10-1 |
| Gauging and inspection of casing，tubing and line pipe threads | GB/T 18052-2000 | 2000-10-1 |
| Computerized shooting & coring system | SY/T 6454-2000 | 2000-10-1 |
| The main link dimension of the drilling and production hoisting equipment | SY/T 5288-2000 | 2000-10-1 |
| High temperature and high pressure fluid loss cell | SY/T 6453-2000 | 2000-10-1 |
| Spear for drilling and servicing | SY/T 5069-2000 | 2000-10-1 |
| Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | SY/T 10006-2000 | 2000-10-1 |
| Jar and accelerator | SY/T 5496-2000 | 2000-10-1 |
| Terminology of imperfections in OCTG and line pipe | SY/T 6445-2000 | 2000-10-1 |
| Core oil/water relative permeameter | SY/T 6452-2000 | 2000-10-1 |
| Tests of electric submersible pump cable systems | GB/T 18050-2000 | 2000-10-1 |
| General Requirements for Maintenance of Common Goods and Materials in Petroleum Enterprise | Q/CNPC 33-2000 | 2000-7-1 |
| Recommended practice for gas lift valve performance testing | SY/T 6400-1999 | 2000-4-1 |
| Specification for rotary drill stem elements | SY/T 6407-1999 | 1999-12-1 |
| Care and use of fiberglass tubulars | SY/T 6419-1999 | 1999-12-1 |
| Technical regulation for heatering equipments used in pipeline transportation | SY/T 6382-1999 | 1999-12-1 |
| Performance properties of casing tubing and drill pipe | SY/T 6417-1999 | 1999-12-1 |
| Recommended practice for installation maintenance and operation of internal-combustion engines | SY/T 6416-1999 | 1999-12-1 |
| Threads on rotary shouldered connections for petroleum industry | GB/T 9253.1-1999 | 1999-12-1 |
| Downhole motors | SY/T 5383-1999 | 1999-12-1 |
| Measuring instruments of core gas permeability | SY/T 6370-1998 | 1999-10-1 |
| Core oil-water saturation measuring apparatus | SY/T 6369-1998 | 1999-10-1 |
| Recommended practice for sizing and selection of electric submersible pump installations | GB/T 17386-1998 | 1999-2-1 |
| Recommended practice for the operation,maintenance and troubleshooting of electric submersible pump installations | GB/T 17387-1998 | 1999-2-1 |
| Petroleum and natural gas industries-Threading，gauging，and thread inspection of casing，tubing and line pipe threads | GB/T 9253.2-1999 | 1999-1-2 |
| Specification for drilling equipment | GB/T 17744-1999 | 1999-1-2 |
| Recommended practice for design installation repair and operation on subsurface safety valve system | SY/T 10024-1998 | 1999-1-1 |
| The stipulation of technical management of electrical equipment for oil and gas pipelines | SY/T 6325-1997 | 1998-7-1 |
| Structures of tubing pump with combined liners and basic dimensions of primary parts | SY/T 5143-1998 | 1998-7-1 |
| The management regulation for the instrument and automatic equipment of the oil and gas transportation pipeline | SY/T 6324-1997 | 1998-7-1 |
| Oil field chain and sprockets | SY/T 5595-1997 | 1998-6-1 |
| Technical requirements for repairs completely of beam pumping unit | SY/T 5187-1997 | 1998-1-1 |
| Electrical submersible pump-Technical specifications | GB/T 16750.2-1997 | 1997-9-1 |
| The test method for electrical submersible pump units | GB/T 16750.3-1997 | 1997-9-1 |
| The types, general parameters and conjunction sizes of electrical submersible pumping equipment | GB/T 16750.1-1997 | 1997-9-1 |
| Wellhead assembly for thermal recovery | SY/T 5328-1996 | 1997-6-1 |
| Specification for installation and acceptance of wet steam generators special used in oil-fields | SY/T 4041-1995 | 1996-6-1 |
| Installation, Operation and Maintenance of Chain Drive Pumping Unit | SY/T 5721-1995 | 1996-5-1 |
| Specification of internal coating for petroleum drill pipes | SY/T 0544-1995 | 1996-5-1 |
| Drill pipe thread gauges | GB/T 9253.9-1995 | 1996-1-1 |
| Safety management regulations for compressed natural gas bottle used in petroleum industrial vehicle | SY 5853-1993 | 1994-6-1 |
| Petroleum equipment. Thread gages for rotary shouldered connections | GB/T 4749-1993 | 1994-6-1 |
| Rotary drilling equipment--Upper and lower kelly cocks | SY/T 5525-1992 | 1993-4-1 |
| Non-destructive Inspection Method for Oil Well Pipe - Ultrasonic Thickness Measurement | SY/T 5447-1992 | 1992-10-1 |
| Technical Conditions of Timer for Petroleum Downhole Instruments | SY/T 5098-1991 | 1992-7-1 |
| Logging cable trucks | SY/T 5074-1991 | 1992-5-1 |
| Specification for Equiping Metering Stations of Crude Oil, Natural Gas and Natral Gasoline | SY/T 5398-1991 | 1992-5-1 |
| Technical Conditions of Shear Measurement Instruments for Drilling Fluid | SY/T 5379-1991 | 1991-12-1 |
| Beam-pumping units | GB 11649-1989 | 1990-6-1 |
| Rebel directional contol tools | SY 5635-1993 | 1988-8-1 |
| Rebel directional contol tools | SY/T 5635-1993 | 1988-8-1 |
| Application and Maintenace of Hydraulic Piston Pumps | SY 5189-1987 | 1988-8-1 |
| Sucker rods and their couplings | GB 7229-1987 | 1987-9-1 |
| Transmission roller chains for oil-field drilling rigs | GB 3638-1983 | 1984-4-1 |
| Specification for gas lift down hole equipment | SY/T 6401-1999 | 1900-4-1 |
