Title |
Standard No. |
Implemented On |
Test method of the bending stress relaxation for copper and copper alloy | GB/T 39152-2020 | 2021-9-1 |
Metallic materials—Test method for rapid indentation (Brinell type) hardness testing | GB/T 24523-2020 | 2021-6-1 |
Mechanical properties measurement—Room temperature tensile test of reacted Nb3Sn composite superconductors | GB/T 38841-2020 | 2020-12-1 |
Metallic materials- Sheet and strip-
Test method for bending and folding properties | GB/T 38806-2020 | 2020-12-1 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint | GB/T 24522-2020 | 2020-12-1 |
Metallic materials—Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces | GB/T 38769-2020 | 2020-11-1 |
Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems | GB/T 38684-2020 | 2020-10-1 |
Metallic materials—Tensile testing—Part 3:Method of test at low temperature | GB/T 228.3-2019 | 2020-7-1 |
Metallic materials—Tensile testing—Part 4:Method of test in liquid helium | GB/T 228.4-2019 | 2020-7-1 |
Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method | GB/T 19748-2019 | 2020-7-1 |
Metallic materials—Indentation test—Determination of strength,hardness and stress-strain curve | GB/T 37782-2019 | 2020-7-1 |
Metallic materials—High strain rate tensile testmethod at elevated temperature | GB/T 37783-2019 | 2020-7-1 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method | GB/T 21838.1-2019 | 2020-7-1 |
Metallic materials—Fatigue testing—Variable amplitude fatiguetesting—Part 2: Cycle counting and related data reduction methods | GB/T 37306.2-2019 | 2020-2-1 |
Steel wire and wire products-General test methods | GB/T 36915-2019 | 2020-2-1 |
Metallic materials—Fatigue testing—Variable amplitude fatigue testing—Part 1: General principles, test method and reporting requirements | GB/T 37306.1-2019 | 2020-2-1 |
Determination of compression strength for sintered metal materials at room temperature | GB/T 6525-2019 | 2020-1-1 |
Fiber metal laminates—Determination of interlaminar shear strength by short-beam method | GB/T 35100-2018 | 2019-4-1 |
Metallic materials-Brinell hardness test-Part 1:Test method | GB/T 231.1-2018 | 2019-2-1 |
Mechanical properties measurement—Room temperature tensile test of Ag-and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors | GB/T 36611-2018 | 2019-1-1 |
Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece | GB/T 36024-2018 | 2018-12-1 |
Metallic materials—Rockwell hardness test—Part 1:Test method | GB/T 230.1-2018 | 2018-12-1 |
Steel—Drop-weight tear tests method | GB/T 8363-2018 | 2018-11-1 |
Impact test method for aluminium matrix composites | GB/T 34556-2017 | 2018-9-1 |
Determination of anti-slip coefficient at bolted connect steel plates’ surfaces | GB/T 34478-2017 | 2018-7-1 |
Metallic materials--Hardness testing--Ultrasonic contact impedance method | GB/T 34205-2017 | 2018-6-1 |
Metallic materials--Fatigue testing--Fatigue crack growth method | GB/T 6398-2017 | 2018-4-1 |
Metallic materials--Tensile testing--Determination of thickness reduction ratio for rectangular specimen | GB/T 33965-2017 | 2018-4-1 |
Metallic materials--Verification of the alignment of testing machines | GB/T 34104-2017 | 2018-4-1 |
Metallic materials--High strain rate compression test method at ambient temperature | GB/T 34108-2017 | 2018-4-1 |
Metallic material—Fatigue testing—Strain-controlled thermomechanical fatigue testing method | GB/T 33812-2017 | 2017-12-1 |
Metallic materials-Ductility testing-High speed compression test for porous and cellular metals | GB/T 33820-2017 | 2017-12-1 |
Metallic materials―Compression test method at room temperature | GB/T 7314-2017 | 2017-11-1 |
Metallic materials―Torque-controlled fatigue testing | GB/T 12443-2017 | 2017-11-1 |
33163-2016 | GB/T 33163-2016 | 2017-9-1 |
Steel sheets--Secondary work embrittlement test method | GB/T 24173-2016 | 2017-9-1 |
Metallic materials - High strain rate torsion test - Part 1: Test method at room temperature | GB/T 32967.1-2016 | 2017-7-1 |
Metallic materials—Webster hardness test—Part 1: Test method | GB/T 32660.1-2016 | 2017-3-1 |
Metal matrix composites—Tensile testing—Method of test at ambient temperature | GB/T 32498-2016 | 2017-1-1 |
Metallic materials―Sheet and strip―Determination of plastic strain ratio | GB/T 5027-2016 | 2016-11-1 |
Metallic materials―Tensile testing at high strain rates―Part 2:Servo-hydraulic and other test systems | GB/T 30069.2-2016 | 2016-11-1 |
Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature | GB/T 228.2-2015 | 2016-6-1 |
Metallic materials―Fatigue testing―Rotating bar bending method | GB/T 4337-2015 | 2016-6-1 |
Metallic materials―Ductility testing―Compression test for porous and cellular metals | GB/T 31930-2015 | 2016-6-1 |
Test method on impact abrasion of steel and iron materials | T/CFA 010604-3-2016 | 2016-5-1 |
Mechanical splices of steel bars. Slip test method | YB/T 4503-2015 | 2016-1-1 |
Test method for stress of monocrystalline sapphire ingot | GB/T 31093-2014 | 2015-9-1 |
Metallic materials―Unified method of test for determination of quasistatic fracture toughness | GB/T 21143-2014 | 2015-9-1 |
Metallic materials―Leeb hardness test―Part 1:Test method | GB/T 17394.1-2014 | 2015-9-1 |
Metallic material―Determination of residual stress―Hole drilling strain-gauge method | GB/T 31310-2014 | 2015-9-1 |
Metallic materials―Determination of residual stress―Sectioning relaxation strain-gage method | GB/T 31218-2014 | 2015-5-1 |
Metallic materials―Leeb hardness test―Part 4:Tables of hardness values conversation | GB/T 17394.4-2014 | 2015-5-1 |
Metallic materials-Shore hardness test-Part 1:Test method | GB/T 4341.1-2014 | 2015-5-1 |
Steel wire ropes—Determination of measured breaking force | GB/T 8358-2014 | 2015-1-1 |
Impact test method of wear resistant steels and irons | T/CFA 010604-2-2014 | 2014-12-1 |
Metallic Materials - Method of Constraint Loss Correction of CTOD Fracture Toughness for Fracture Assessment of Steel Components | GB/T 30064-2013 | 2014-9-1 |
Metallic Materials - Tensile Testing at High Strain Rates - Part 1: Elastic-bar-type Systems | GB/T 30069.1-2013 | 2014-9-1 |
Test pieces and method for tensile test for wrought aluminium and magnesium alloys products | GB/T 16865-2013 | 2014-5-1 |
Metallic materials—Tensile stress relaxation—Method of test | GB/T 10120-2013 | 2014-5-1 |
Cold rolled steel sheet for enamelling—Fish-scaling sensitivity test—Hydrogen permeation method | GB/T 29515-2013 | 2014-2-1 |
Small punch test methods of metallic materials for in-service pressure equipments—Part 2:Method of test for tensile properties at room temperature | GB/T 29459.2-2012 | 2013-7-1 |
Small punch test methods of metallic materials for in-service pressure equipments—Part 1:General requirements | GB/T 29459.1-2012 | 2013-7-1 |
Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds | GB/T 28896-2012 | 2013-5-1 |
Metallic materials—Uniaxial creep testing method in tension | GB/T 2039-2012 | 2013-3-1 |
Test methods for composite performances of aluminium alloy thermal barrier profiles | GB/T 28289-2012 | 2013-2-1 |
Metallic materials - Wire - Part 1: Simple torsion test | GB/T 239.1-2012 | 2013-2-1 |
Test method of impact fatigue life of casting grinding ball | T/CFA 010604-1-2012 | 2012-8-1 |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature | GB/T 228.1-2010 | 2011-12-1 |
Mechanical Property Tests of Product Welded Test Coupons for Pressure Equipments | NB/T 47016-2011 | 2011-10-1 |
Metallic materials—Welding residual stresses—Method with explosion treatment | GB/T 26078-2010 | 2011-10-1 |
Metallic materials—Fatigue testing—Axial-strain-controlled method | GB/T 26077-2010 | 2011-10-1 |
Metal sheets and strips—Axial-force-controlled fatigue testing method | GB/T 26076-2010 | 2011-10-1 |
Ferroalloys—Vocabulary—Part 1:Materials | GB/T 14984.1-2010 | 2011-6-1 |
Ferroalloys—Vocabulary—Part 2:Sampling and sample preparation | GB/T 14984.2-2010 | 2011-6-1 |
Ferroalloys - Vocabulary - Part 3:Sieve analysis | GB/T 14984.3-2010 | 2011-6-1 |
Test method for rapid indentation (Brinell)hardness testing of metallic materials | GB/T 24523-2009 | 2010-5-1 |
Metallic materials—Sheet and strip—Hole expanding test | GB/T 24524-2009 | 2010-5-1 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint | GB/T 24522-2009 | 2010-5-1 |
Metallic materials—Tensile testing—Method of test in liquid helium | GB/T 24584-2009 | 2010-5-1 |
Metallic materials - Rockwell hardness test - Part 1: Test method(scales A, B, C, D, E, F, G, H, K, N, T) | GB/T 230.1-2009 | 2010-4-1 |
Mechanical testing of metals—Symbols and definitions in published standard | GB/T 24182-2009 | 2010-4-1 |
Method for evaluation of tensile properties of metallic superplastic materials | GB/T 24172-2009 | 2010-4-1 |
Metallic materials—Residual stress determination—The indentation strain-gage method | GB/T 24179-2009 | 2010-4-1 |
Metallic materials—Vickers hardness test—Part 4:Tables of hardness values | GB/T 4340.4-2009 | 2010-4-1 |
Metallic materials—Vickers hardness test—Part 1:Test method | GB/T 4340.1-2009 | 2010-4-1 |
Steel sheets—Secondary work embrittlement testing method | GB/T 24173-2009 | 2010-4-1 |
Steel—Determination of Bake-Hardening-Index(BH2) | GB/T 24174-2009 | 2010-4-1 |
Metallic materials—Knoop hardness test—Part 1:Test method | GB/T 18449.1-2009 | 2010-4-1 |
GB/T 18449.4-2009 | GB/T 18449.4-2009 | 2010-4-1 |
Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method | GB/T 24185-2009 | 2010-4-1 |
Metallic materials—Brinell hardness test—Part 4:Tables of hardness values | GB/T 231.4-2009 | 2010-4-1 |
Metallic materials—Sheet and strip—Determination of forming limit curves—Part 1:Measurement and application of forming limit diagrams in press shop | GB/T 24171.1-2009 | 2010-4-1 |
Metallic materials—Brinell hardness test—Part 1:Test method | GB/T 231.1-2009 | 2010-4-1 |
Metallic materials—Fatigue testing—Statistical planning and analysis of data | GB/T 24176-2009 | 2010-4-1 |
Metallic materials—Earing test | GB/T 24183-2009 | 2010-4-1 |
Metallic materials—Sheet and strip—Determinations of forming limit curves—Part 2:Determinations of forming limit curves in laboratory | GB/T 24171.2-2009 | 2010-4-1 |
Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending | GB/T 22565-2008 | 2009-10-1 |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent | GB/T 5028-2008 | 2009-10-1 |
Metallic materials - Fatigue testing - Rotating bar bending method | GB/T 4337-2008 | 2009-4-1 |
Metallic materials - Fatigue testing - Axial-force-controlled method | GB/T 3075-2008 | 2009-4-1 |
Metallic materials - Determination of modulus of elasticity and poissons ratio | GB/T 22315-2008 | 2009-4-1 |
Steel wire ropes - Bending fatigue testing | GB/T 12347-2008 | 2009-4-1 |
Method for deep drawing cups testing of non-ferrous metals | GB/T 5125-2008 | 2008-12-1 |
Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels | GB/T 6803-2008 | 2008-11-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method | GB/T 21838.1-2008 | 2008-11-1 |
Clad steel plates - Mechanical and technological test | GB/T 6396-2008 | 2008-11-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings | GB/T 21838.4-2008 | 2008-11-1 |
Metallic material - Mechanical testing - Vocabulary | GB/T 10623-2008 | 2008-11-1 |
Metallic materials - Fracture toughness testing method with surface crack tension specimens | GB/T 7732-2008 | 2008-11-1 |
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials | GB/T 15248-2008 | 2008-10-1 |
Metallic materials-Lardge minimeter diameter wire-Torsion test | YB/T 4176-2008 | 2008-9-1 |
Determination of charpy impact fracture surface for metallic materials | GB/T 12778-2008 | 2008-7-1 |
Metallic materials - Torsional stress fatigue testing method | GB/T 12443-2007 | 2008-6-1 |
Metallic Materials - Charpy Pendulum Impact Test Method | GB/T 229-2007 | 2008-6-1 |
Metallic materials - Torsion test at ambient temperature | GB/T 10128-2007 | 2008-6-1 |
Test method for drop-weight tear tests of steel products | GB/T 8363-2007 | 2008-4-1 |
Metallic materials—Sheet and strip—Determination of plastic strain ratio | GB/T 5027-2007 | 2008-3-1 |
Metallic materials—Determination of plane-strain fracture toughness | GB/T 4161-2007 | 2008-2-1 |
Metallic materials ― Unified method of test for determination of quasistatic fracture toughness | GB/T 21143-2007 | 2008-2-1 |
Metallic materials—Shear test method for wires and rivets | GB/T 6400-2007 | 2008-2-1 |
Sintered metal frication materials run in lubricants-Determination of fricational characteristics | JB/T 7268-2007 | 2008-1-1 |
Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire | GB/T 3250-2007 | 2007-11-1 |
Test method of metallic materials—Dynamic tear | GB/T 5482-2007 | 2007-8-1 |
Metallic materials—Designation of test specimen axes in relation to product texture | GB/T 20832-2007 | 2007-6-1 |
Metallic materials - Wear test method - Block-on-ring sliding wear test | GB/T 12444-2006 | 2007-2-1 |
Metallic materials - Tube ring hydraulic pressure test | GB/T 20568-2006 | 2007-2-1 |
Compression test method for aluminium and aluminium alloys tubes | GB/T 3251-2006 | 2007-2-1 |
Metallic materials―Tensile testing at low temperature | GB/T 13239-2006 | 2007-1-1 |
Metallic materials - Tensile testing at elevated temperature | GB/T 4338-2006 | 2007-1-1 |
Test method for sag of tungsten wire | YS/T 515-2006 | 2006-10-11 |
Method of Breaking Tensile Test for Steel Wire Ropes | GB/T 8358-2006 | 2006-9-1 |
Verification of static uniaxial testing machines—Part 2:Tension creep testing machines—Verification of the applied force | GB/T 16825.2-2005 | 2006-3-1 |
bimetal material - Determination of shear strength | YS/T 485-2005 | 2005-12-1 |
materials - Compression testing at ambient temperature | GB/T 7314-2005 | 2005-10-1 |
Steel - Charpy V-notch pendulum impact test - Instrumented test method | GB/T 19748-2005 | 2005-10-1 |
Determining of plane-strain crack-arrest fracture toughness,K Ia,for ferritic Steels | GB/T 19744-2005 | 2005-10-1 |
Steel-strain ageing sensibility test(Charpy impact method) | GB/T 4160-2004 | 2004-7-1 |
Metallic materials--Brinell hardness test--Part 1:Test method | GB/T 231.1-2002 | 2003-6-1 |
Verification of static uniaxial testing machines--Part 1:Tension/compression testing machines--Verification and calibration of the force-measuring system | GB/T 16825.1-2002 | 2003-5-1 |
Metallic materials - Wire - Reverse bend test | GB/T 238-2002 | 2002-12-1 |
Metallic Materials – Tensile Testing at Ambient Temperature | GB/T 228-2002 | 2002-7-1 |
Metallic materials--Shore hardness test | GB/T 4341-2001 | 2002-5-1 |
Metallic knoop hardness test--Part 1:Test method | GB/T 18449.1-2001 | 2002-2-1 |
STANDARD test method for fatigue crack growth rates of metallic materials | GB/T 6398-2000 | 2001-6-1 |
Metallic materials-Sheet and strip-Determination of tensile strain hardening exponent( n-values) | GB/T 5028-1999 | 2000-8-1 |
Metallic materials-Sheet and strip--Determination of plastic strain ratio( r-values) | GB/T 5027-1999 | 2000-8-1 |
Metallic materials--Vickers hardness test --Part 1:Test method | GB/T 4340.1-1999 | 2000-5-1 |
Conversion of hardness and strength for ferrous metal | GB/T 1172-1999 | 1999-10-1 |
Steel--Conversion of elongation values--Part 2:Austenitic steels | GB/T 17600.2-1998 | 1999-7-1 |
Steel--Conversion of elongation values--Part 1: Carbon and low alloy steels | GB/T 17600.1-1998 | 1999-7-1 |
Test methods of precious metal pastes used for thick film microelectronics--Determination of adhesion | GB/T 17473.4-1998 | 1999-3-1 |
Test methods of precious metal pastes used for thick film microelectronics--Determination of viscosity | GB/T 17473.5-1998 | 1999-3-1 |
Metal Material (Herringbone Notch) - Test Method for Plane Strain Fracture Toughness | HB 7572-1997 | 1997-10-1 |
Test Method for Compression of Metal Under High Temperature | HB 7571-1997 | 1997-10-1 |
Metallic materials—Creep and stress-rupture test in tension | GB/T 2039-1997 | 1997-9-1 |
Metallic materials-Stress relaxation test | GB/T 10120-1996 | 1997-3-1 |
Steel wire rope-Bending fatigue testing | GB/T 12347-1996 | 1997-3-1 |
Method of Notch Tensile Test for Metal at Room Temperature | HB 5214-1996 | 1997-1-1 |
Method of Tensile Test for Metal Foil | HB 5280-1996 | 1997-1-1 |
Method of Tensile Test for Metal Pipe at Room Temperature | HB 5145-1996 | 1997-1-1 |
Plane Strain Fracture Toughness of Metal Material KIC Test Method | HB 5142-1996 | 1997-1-1 |
Method of Fatigue Test for Axial Loading of Metal Material | HB 5287-1996 | 1996-10-1 |
Method of Impact Test For Metal at Room Temperature | HB 5144-1996 | 1996-10-1 |
Metallic Materials - Tensile Testing at Elevated Temperature | HB 5195-1996 | 1996-10-1 |
Metallic Materials - Vickers Hardness Test | HB 5173-1996 | 1996-10-1 |
Metallic Materials - Stress Rupture Testing at Elevated temperature | HB 5150-1996 | 1996-10-1 |
Method of Tensile Creep Test for Metal at High Temperature | HB 5151-1996 | 1996-10-1 |
Method of Tension Test for Metal at Room Temperature | HB 5143-1996 | 1996-10-1 |
Metallic materials-Tensile testing at elevated temperature | GB/T 4338-1995 | 1996-3-1 |
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials | GB/T 15248-1994 | 1995-6-1 |
Clad plates-Mechanical and technological test | GB/T 6396-1995 | 1995-1-2 |
Metallic materials-Determination of bending mechanical properties | GB/T 14452-1993 | 1994-1-1 |
Test Method for Thermal Fatigue of Metals with Rectangular Plate Specimen | HB 6660-1992 | 1993-3-1 |
Test Methods for Metallic Material Over Its Fatigue Crack Growth Speed In the Medium Containing Water | HB 6626-1992 | 1992-12-1 |
Metallic materials-Tensile testing at low temperatures | GB/T 13239-1991 | 1992-7-1 |
Metallic materials-Rockwell hardness test | GB/T 230-1991 | 1992-7-1 |
Metallic materials-Standard tes method for JIC,a measure of ductile fracture toughness | GB/T 2038-1991 | 1992-3-1 |
Metallic materials--Vickers microhardness test | GB/T 4342-1991 | 1992-3-1 |
Metal Material Stress - Determination Method for Strain Curve | HB 5488-1991 | 1991-10-1 |
Method of Fracture Toughness Test for Aluminum Alloy | HB 5487-1991 | 1991-10-1 |
Metallic materials-Torsional stress fatigue testing | GB 12443-1990 | 1991-7-1 |
Steel wire ropes up to 9. 5mm in diameter--Bending fatigue testing | GB 12347-1990 | 1991-1-1 |
Metallic materials-Terms of mechanical test | GB 10623-1989 | 1990-7-1 |
Metallic materials-Torsion test at room temperature | GB/T 10128-1988 | 1990-1-1 |
Metallic materials--Tensile testing at ambient temperature | GB/T 228-1987 | 1988-1-1 |
High temperature shear test method for metals wires and rivets | GB/T 6400-1986 | 1987-5-1 |
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials | GB 6399-1986 | 1987-5-1 |
Metallic materials--Stress rupture testing at elevated temperatures | GB 6395-1986 | 1987-5-1 |
Metallic materials--Charpy impact test at elevated temperatures | GB 5775-1986 | 1986-11-1 |
Determination of effective depth of hardening after induction or flame hardening of steel | GB/T 5617-1985 | 1986-8-1 |
Metallic materials--Vickers hardness test | GB 4340-1984 | 1986-3-1 |
Metallic materials--Shore hardness test | GB/T 4341-1984 | 1986-3-1 |
Metallic materials--Brinell hardness test | GB/T 231-1984 | 1986-3-1 |
Metals--Rotating bar bending fatigue testing | GB/T 4337-1984 | 1985-3-1 |
Metallic materials--Charpy impact test (U-notch) | GB 229-1984 | 1985-1-1 |
Sustained load tensile test method of metals for resistance to sulfide stress corrosion cracking | GB/T 4157-1984 | 1985-1-1 |
The izod impact test on metals | GB/T 4158-1984 | 1985-1-1 |
Hardmetals; Determination of transverse rupture strength | GB/T 3851-1983 | 1984-9-1 |
Hardmetals; Rockwell hardness(scale A) test method | GB/T 3849-1983 | 1984-9-1 |
Test Method for Metal Low-temperature Impact Tenacity | HB 5278-1984 | 1984-5-1 |
Conversion of hardness and strength for copper alloys | GB 3771-1983 | 1984-4-1 |
Test Method for Metal Low-cycle Thermal Fatigue | HB 5217-1982 | 1983-5-1 |
The Izod Impact Test on Metals | HB 5209-1982 | 1983-5-1 |
Test Method for Metal Elastic Modulus at Elevated Temperature | HB 5212-1982 | 1983-5-1 |
Method for Tensile Testing of Metallic Tubes at Elevated Temperature | HB 5211-1982 | 1983-5-1 |
Method for tensile testing of metallic sheet and strip | GB/T 3076-1982 | 1983-3-1 |
Metal Tubes - Hydrostatic Pressure Testing Method | HB 5181-1981 | 1981-12-1 |
Test Method for Low Cycle Fatigue of Axial Constant Amplitude | HB 5167-1981 | 1981-12-1 |
Metallic Cementing - Test Method for Tensile and Shear Strength | HB 5164-1981 | 1981-10-1 |
Rockwell hardness test method for metal surfaces | GB 1818-1979 | 1980-9-1 |