Code of China Chinese Classification Professional Classification ICS Classification Latest Value-added Services

LoginRegister

Title Standard No. Implemented On
QJ A 1181.2-1995 Heat Treatment for Magnetically Soft Alloy - Magnetically Soft Alloy with High Saturation Flux Density QJ A 1181.2-1995
QJ A 1181.4-1995 Heat Treatment for Magnetically Soft Alloy - Magnetic Temperature Compensation Alloy QJ A 1181.4-1995
QJ A 1181.5-1995 Heat Treatment for Magnetically Soft Alloy - Anti-corrosion Magnetically Soft Alloy QJ A 1181.5-1995
QJ A 1181.1-1995 Heat Treatment for Magnetically Soft Alloy - Fe-Ni Magnetically Soft Alloy QJ A 1181.1-1995
Heat Treatment of Expansion AlloysQJ 2046A-2008
QJ A 1181.3-1995 Heat Treatment for Magnetically Soft Alloy - Fe-Al Magnetically Soft Alloy QJ A 1181.3-1995
Technique requirement and evaluation system of cleaning and energy saving heat treatment equipmentGB/T 36561-20182019-2-1
Technical requirement of cleaning liquid waste recycling and emissions for heat treatmentGB/T 32529-20162016-9-1
High temperature carburizingGB/T 32539-20162016-9-1
Quality control system for heat treatmentGB/T 32541-20162016-9-1
Environmental Protection Technical Requirements for Heat Treatment IndustryGB/T 30822-20142014-12-31
Testing method for temperature uniformity of gas heat treatment furnaceGB/T 30824-20142014-12-31
Nickel-alloy probe testmethod for determination cooling characteristics of industrialquenching oilGB/T 30823-20142014-12-31
Requirements for the safety and health in production process of metal heat treatmentGB 15735-20122013-6-1
Testing method for working zone of heat treatment furnaceGB/T 9452-20122013-3-1
Technical requirement of deep carburizingGB/T 28694-20122013-3-1
Terminology of metal heat treatmentGB/T 7232-20122013-3-1
The terminology of technological materials for heat treatmentGB/T 8121-20122013-3-1
The management of hazardous solid wastes from heat treatment salt - Part 1: General management GB/T 27945.1-20112012-10-1
The management of hazardous solid wastes from heat treatment salts - Part 2: Test method of extractives GB/T 27945.2-20112012-10-1
Limited value of hazardous substance in the air of heat treatment working placeGB/T 27946-20112012-10-1
The management of hazardous solid wastes from heat treatment salts - Part 3: Method of innocent treatment GB/T 27945.3-20112012-10-1
The technical requirements of accuracy-controlled gaseous nitridingJB/T 11232-20112012-4-1
Test method of polymer quenchantsJB/T 4392-20112011-11-1
Vacuum carburizing and post-quenching of steel partJB/T 11078-20112011-11-1
The technical requirement of heat treatment for largepit-type controlled atmosphere carburizing furnaceJB/T 11077-20112011-11-1
Polyvinyl alcohol of quenching mediaJB/T 4393-20112011-11-1
Steel—foil method for determination of carbon-potential of carburizing atmosphereJB/T 10312-20112011-11-1
Cryogenic treatment of steel partsGB/T 25743-20102011-6-1
Heat treatment of cast aluminium alloysGB/T 25745-20102011-6-1
Metallographic examination for carburizing quenching and tempering of steel partsGB/T 25744-20102011-6-1
Vacuum heat treatmentGB/T 22561-20082009-6-1
Gas nitrocarburizing of iron and steel partsGB/T 22560-20082009-6-1
Normalizing and annealing of steel partsGB/T 16923-20082009-1-1
Quenching and tempering of steel partsGB/T 16924-20082009-1-1
Gas nitriding of steel partsGB/T 18177-20082009-1-1
The technical requirements of heat treatment for mesh-belt conveyor furnace lineJB/T 10897-20082008-11-1
High and medium tempereture salt bath rectifierJB/T 4390-20082008-11-1
Method of prescribing heat treatment requirements in drawingsJB/T 8555-20082008-11-1
Heat treatment of steels in endothermic atmospheresJB/T 9208-20082008-11-1
Heat treatment of steels in endothermic atmospheresJB/T 9207-20082008-11-1
Metallographic examination of induction hardened steel partsJB/T 9204-20082008-11-1
Quality control requirement for heat treatmentJB/T 10175-20082008-11-1
Flame hardening and tempering of iron and steel partsJB/T 9200-20082008-11-1
Methods of quality inspection on shot-peening for steel-iron partsJB/T 10174-20082008-11-1
Classification and code of technological materials for heat treatmentJB/T 8419-20082008-11-1
Deep carburizingJB/T 8929-20082008-11-1
Technical requiremnets of heat treatment for controlled atmosphers sealing multipurpose furnace lineJB/T 10895-20082008-11-1
Metallographic examination of peralitic graphite cast iron parts induction hardenedJB/T 9205-20082008-11-1
Solid carburizerJB/T 9203-20082008-11-1
BoronizingJB/T 4215-20082008-11-1
the specification of quenching medium for heat treatmentJB/T 6955-20082008-11-1
Technical specifications of energy-saving combustion devices for heat treatingGB/T 21736-20082008-11-1
Technical requirement heat treatment for machine tool parts—part 2:Quenching and temperingJB/T 8491.2-20082008-11-1
Salt bath sulpho nitrocarburizingJB/T 9198-20082008-11-1
Powder diffusion metallizingJB/T 8418-20082008-11-1
Technical requirement of heat treatment for pusher type controlled atmosphere carburizing lineJB/T 10896-20082008-11-1
Martensite grade of medium-carbon steel and medium-carbon alloy structural steelJB/T 9211-20082008-11-1
Technical requirement heat treatment for machine tool parts—part 3:Induction hardning and temperingJB/T 8491.3-20082008-11-1
Technical requirement heat treatment for machine tool parts—Part 1:Annealing and normalizing or hardening and temperingJB/T 8491.1-20082008-11-1
Technical requirement of medium for thermo-chemical treatmentJB/T 9209-20082008-11-1
Technical requirement heat treatment for machine tool parts—part 5:Nitriding and nitrocarburzongJB/T 8491.5-20082008-11-1
Technical Requirement of Stop-off PaintsJB/T 9199-20082008-11-1
Remaining heat from forging for quenching and tempering of steelJB/T 4202-20082008-11-1
Microstructure grading of hat die steelJB/T 8420-20082008-11-1
Heat treating for stainless steel and heat-resisting steelJB/T 9197-20082008-11-1
Technical requirement heat treatment for machine tool parts—part 4:carburizing or carbonitriding and quenching and temperingJB/T 8491.4-20082008-11-1
General technical requiremetns for heat treatment protective paintsJB/T 5072-20072007-9-1
Heat treatment of grey cast ironJB/T 7711-20072007-9-1
Metallographic examination method of diffusion metallized layer of steel partsJB/T 5069-20072007-9-1
General technical requirements for argon nitrogen and hydrogen gases used in heat treatmenJB/T 7530-20072007-9-1
Induction hardening and tempering of iron and steel partsJB/T 9201-20072007-9-1
Heat treatment of superalloyJB/T 7712-20072007-9-1
Heat treatment processes and quality inspection of ductile ironJB/T 6051-20072007-9-1
Determination of microstructure for the thin layer carbonitriding or carburizing elementsJB/T 7710-20072007-9-1
Selection of low temperature thermochemical treatment processesJB/T 7500-20072007-9-1
Quanity inspection and enaluation of grey castings hardened by contact-resistance-heatingJB/T 6954-20072007-9-1
Iron nitriding for iron and steel partsJB/T 6956-20072007-9-1
Carburizing or carbonitriding, post-quenching and tempering of steel partJB/T 3999-20072007-9-1
Heat treatment of ductil ironJB/T 7529-20072007-9-1
Inspection method of microstructure hardeness and depth of boronized layerJB/T 7709-20072007-9-1
Metallographic examination method of high-carbon high-alloy cold-work tool steelJB/T 7713-20072007-9-1
Borax bath metallizingJB/T 4218-20072007-9-1
Spheroidite grade of low and medium carbon steelJB/T 5074-20072007-9-1
Generalization of hardness test for heat treated iron and steel partsJB/T 6050-20062006-10-1
Classifications and designations for metal heat treatment GB/T 12603-20052006-1-1
Determination of effective depth of handening after induction or flame handening of steelGB/T 5617-20052006-1-1
Determination of nitrided case depth and metallographic microstructure examination for steel and iron partsGB/T 11354-20052006-1-1
Determination of total or effective thickness of thin surface hardened layers of steel partsGB/T 9451-20052006-1-1
Steels—Determination and verification of the depth of carburized and hardened casesGB/T 9450-20052006-1-1
Solid aluminizing process and quality inspection of iron and steel partsJB/T 10448-20052005-11-1
Vacuum heat treatment of titanium alloy partsHB 7750-20042004-12-1
Salts for heat treatmentJB/T 9202-20042004-11-1
Technological requirements of liquid quenching apparatusJB/T 10457-20042004-11-1
Industrial quenching oil-Determination of cooling characteristics-Nickel-alloy probe test method(ISO 9950: 1995, IDT)JB/T 7951-20042004-6-1
Heating and Cooling in Salt Bath for Metallic ComponentsJB/T 6048-20042004-6-1
Steel-foil method for determination of carbon-potential of carburizing atmosphereJB/T 10312-20012002-6-1
Gas nitriding of steel partsGB/T 18177-20002001-1-1
Methods of quality inspection on shot-peening for steel-iron partsJB/T 10174-20002000-10-1
Quality control requirement for heat treatmentJB/T 10175-20002000-10-1
Salt bath sulpho nitrocarburizingJB/T 9198-19992000-1-1
Ansforging and tempering of steelJB/T 4202-19992000-1-1
Carburizing or carbonitriding and post-quenching and tempering of steel partJB/T 3999-19992000-1-1
Deep carburizingJB/T 8929-19992000-1-1
Heat treatment of steels in endothermic atmospheresJB/T 9207-19992000-1-1
Classifications and symbols of controlled atmospheresJB/T 9208-19992000-1-1
Vacuum heat treatmentJB/T 9210-19992000-1-1
Normalizing and annealing of steel partsGB/T 16923-19971998-2-1
Quenching and tempering of steel partsGB/T 16924-19971998-2-1
Requirements for the safety and health in production process of metal heat treatmentGB 15735-19951997-1-1
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Corrosion-resistant Magnetically Soft Alloy QJ 1181.5A-19951995-11-26
Heat Treatment for Magnetically Soft Alloy - High Saturation Flux Density - Heat Treatment for Magnetically Soft Alloy QJ 1181.2A-19951995-11-26
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Constant Permeability Alloy QJ 1181.6A-19951995-11-26
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Iron and Aluminium Magnetically Soft Alloy QJ 1181.3A-19951995-11-26
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Fe-ni Magnetically Soft Alloy QJ 1181.1A-19951995-11-26
Heat Treatment for Magnetically Soft Alloy - Heat Treatment for Magnetic Temperature Compensation Alloy QJ 1181.4A-19951995-11-26
Harmful Solid Waste of Heat Treatment Salt Bath (Barium Salt and Nitric Salt) Analysis MethodJB/T 7519-19941995-10-1
Heat Treatment of Silicon Steel for Electrical Purposes QJ 2666-19941994-12-1
Technology for Hot Isostatic Pressing of Titanium Alloy Casting HB/Z 234-19931994-3-1
Instructions on Heat Treatment Process of Expansion Alloy HB/Z 239-19931994-3-1
Technical Specification for Quenching of Turnout Steel RailsTB/T 1779-19931993-10-1
Decontamination Treatment Method for Harmful Solid Waste from Heat Treatment Salt BathJB/T 6047-19921993-7-1
Heavy-duty Gears Carburization Quality InspectionJB/T 6141.2-19921993-1-1
Heat Treatment of Spring Steels QJ 2257-19921992-11-30
Heat Treatment of Beryllium Bronze QJ 2255-19921992-10-30
Instructions for copper and copper alloys heat treatment process HB/Z 216-19921992-10-1
Classification and designation on metal heat treatmentGB/T 12603-19901991-1-2
Precious alloy heat treatment process description for elastomeric parts HB/Z 161-19901990-12-1
Steel-iron parts-Determination of nitrided case depth and metallographic examination of nitriding structureGB/T 11354-19891990-1-1
Determination of total or effective thickness of thin surface hardened layers of steel partsGB/T 9451-19881989-3-1
Testing method for working zone of heat treating furnaceGB/T 9452-19881989-3-1
The terminology of technological materials for heat treatmentGB/T 8121-19871988-7-1
About Us Contact Us Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 Email: coc@codeofchina.com | Send me a messageQQ: 672269886
Copyright: Codeofchina Inc 2008-2020