| Title |
Standard No. |
Implemented On |
| Guide for energy saving design of compressed air station | T/CGMA 033002-2020 | 2021-1-1 |
| Compressed air—Energy efficiency—Assessment | GB/T 38182-2019 | 2020-2-1 |
| Compressed air—Part 5:Test methods for oil vapour and organic solvent content | GB/T 13277.5-2019 | 2019-10-1 |
| Displacement compressors vocabulary—General | GB/T 4975-2018 | 2019-2-1 |
| Air compressors,rock drilling machines and pneumatic tools—Preferred pressures | GB/T 4974-2018 | 2018-12-1 |
| Industrial fan―Performance testing using standardized airways | GB/T 1236-2017 | 2018-5-1 |
| Displacement compressors―Acceptance tests | GB/T 3853-2017 | 2018-5-1 |
| Oil-free reciprocating air compressors on locomotives and power cars | GB/T 33625-2017 | 2017-12-1 |
| Compressors -- Classification | GB/T 4976-2017 | 2017-12-1 |
| Compressed air — Part 2: Test methods for oil aerosol content | GB/T 13277.2-2015 | 2016-6-30 |
| Reciprocating minitype air compressors | GB/T 13928-2015 | 2016-6-1 |
| Filters for Compressed Air - Test Methods - Part 1: Oil Aerosols | GB/T 30475.1-2013 | 2014-10-1 |
| Filters for Compressed Air - Test Methods - Part 2: Oil Vapours | GB/T 30475.2-2013 | 2014-10-1 |
| Industrial off-gas energy recovery turbine expander | GB/T 29542-2013 | 2014-1-1 |
| Specifications of technical renovation for energy-saving and increase of air flow of large cooling tower | DB31/T 729-2013 | 2013-12-1 |
| Management standard for safety and energy-saving operation of smoke and heat exhaust fan | DB31/T 726-2013 | 2013-12-1 |
| Energy-saving specifications for roof fan system in industrial enterprises | DB31/T 727-2013 | 2013-12-1 |
| Single Screw Air Compressor for Electric Bus | JB/T 11421-2013 | 2013-9-1 |
| Oil Injected Scroll Air Compressor for General Use | JB/T 11423-2013 | 2013-9-1 |
| Compressed air dryers—Part 1:Specifications and testing | GB/T 10893.1-2012 | 2013-7-1 |
| Fan filter unit | JG/T 388-2012 | 2012-12-1 |
| Top gas pressure recovery turbine expander | GB/T 28246-2012 | 2012-7-1 |
| Explosion-proof fan | GB 26410-2011 | 2012-1-1 |
| Oil injected single screw air compressor for general use | GB/T 26967-2011 | 2012-1-1 |
| Axial flow fans for mine ventilations | JB/T 4296-2011 | 2011-11-1 |
| Power station axial fans | JB/T 4362-2011 | 2011-11-1 |
| Reciprocating piston compressor part-subassembly — Part 3：Thin-walled bearing shells | JB/T 2231.3-2011 | 2011-8-1 |
| Electric controller (cabinet) for adsorption dryer | JB/T 11177-2011 | 2011-8-1 |
| Cast iron pstion ring of reciprocating piston compressors | JB/T 5447-2011 | 2011-8-1 |
| Electric controller (cabinet) for refrigeration dryer | JB/T 11176-2011 | 2011-8-1 |
| Labyrinth piston compressor | JB/T 11178-2011 | 2011-8-1 |
| Non-lubricated Liquefied Petroleum Gas Recycle Compressor | JB/T 8052-2011 | 2011-8-1 |
| Thermodynamic performance testing for blast furnace gas energy recovery turbo-expander | GB/T 26137-2010 | 2011-7-1 |
| Petroleum and natural gas industries—Packaged reciprocating gas compressors | GB/T 25359-2010 | 2011-3-1 |
| Packaged rotary oil-free air compressors for petroleum and natural gas industries | GB/T 25358-2010 | 2011-3-1 |
| Petroleum petrochemical and natural gas industries - Process positive-displacement rotary-type compressors | GB/T 25357-2010 | 2011-3-1 |
| Turbocompressors - Performance test code | GB/T 25630-2010 | 2011-3-1 |
| The reciprocating piston natural gas compressor for the vehicle gas station | GB/T 25360-2010 | 2011-3-1 |
| Technical specification for draught fan application | JB/T 6886-2010 | 2010-7-1 |
| Conversion frequency oil-flooded | JB/T 10972-2010 | 2010-7-1 |
| Glass fiber reinforced plastic axial fans | JB/T 10981-2010 | 2010-7-1 |
| Miniature cross-flow fan | GB/T 13933-2008 | 2009-5-1 |
| Screw refrigerant compressors | GB/T 19410-2008 | 2009-5-1 |
| Compressed air - Part 1：Contaminants and purity classes | GB/T 13277.1-2008 | 2009-3-1 |
| Safety requirements of displacement air compressor | GB 22207-2008 | 2009-3-1 |
| Basic Types Sizes Parameters and Characteristics Curve of Fans | GB/T 3235-2008 | 2009-2-1 |
| Methods of noise measurement for fans blowers compressors and roots blowers | GB/T 2888-2008 | 2009-2-1 |
| Specifications for the portable compressor chassis | JB/T 3771-2008 | 2008-11-1 |
| Centrifugal fan for boiler of power station | JB/T 4358-2008 | 2008-11-1 |
| Centrifugal ID-fan for industry boiler | JB/T 4357-2008 | 2008-11-1 |
| Small reciprocating piston hydrogen compressors | JB/T 10909-2008 | 2008-11-1 |
| Air-oil separator elements for general oil-flooded rotary air compressors | JB/T 10910-2008 | 2008-11-1 |
| Economical operation for the fan system | GB/T 13470-2008 | 2008-11-1 |
| Economical operation for centrifugal mixed flow axial flow and vortex pump systems | GB/T 13469-2008 | 2008-11-1 |
| Oil-free reciprocating piston air compressors | JB/T 8933-2008 | 2008-11-1 |
| Mixed flow fan specification | JB/T 10820-2008 | 2008-7-1 |
| Industrial fans-Flange | JB/T 10832-2008 | 2008-7-1 |
| Technical requirement for environmental protection product General low noise axle-flow flower | HJ/T 384-2007 | 2008-3-1 |
| Specifications for the truck-mounted displacement air compressor unit | JB/T 4223-2007 | 2007-11-1 |
| Determination of soud power levels for noise emitted by general machinery at the work station-Sound intensity method | JB/T 7665-2007 | 2007-11-1 |
| Coating specifications for displacement compressors | JB/T 7663.2-2007 | 2007-11-1 |
| Displacement compressor vocabulary-Rotating compressor | JB/T 7662-2007 | 2007-11-1 |
| Non-lubiricated swing air compressor | JB/T 10684-2006 | 2007-7-1 |
| Industrial fans-performance testing in situ | GB/T 10178-2006 | 2007-7-1 |
| Reciprocating piston air compressors of medium & high pressure | JB/T 10683-2006 | 2007-7-1 |
| Axial and centrifugal compressors and expander-compressors for petroleum chemical and gas industry services-Part 4:Expander-compressors | JB/T 6443.4-2006 | 2007-5-1 |
| Axial and centrifugal compressors and expander-compressors for petroleum chemical and gas industry services-Part 3:Integrally geared compressors | JB/T 6443.3-2006 | 2007-5-1 |
| Axial and centrifugal compressors and expander-Compressors for petroleum chemical and gas Industry services | JB/T 6443-2006 | 2007-5-1 |
| Axial and centrifugal compressors and expander-compressors for petroleum chemical and gas industry services-Part 1:General requirements | JB/T 6443.1-2006 | 2007-5-1 |
| Centrifugal blower for general purpose | JB/T 7258-2006 | 2007-5-1 |
| Axial and centrifugal compressors and expander-compressors for petroleum chemical and gas industry services-Part 2:Centrifugal and axial compressors | JB/T 6443.2-2006 | 2007-5-1 |
| Design regulation for centrifugal compressor foundation | HG/T 20555-2006 | 2007-4-1 |
| Centrifugal blower for sinter works | JB/T 7259-2006 | 2007-2-1 |
| Petroleum and natural gas industries - Reciprocating compressors | GB/T 20322-2006 | 2007-1-1 |
| Compressed air dryers - Part 2: Performance ratings | GB/T 10893.2-2006 | 2007-1-1 |
| The general principles of economic operation for AC driven fan (pump air compressor) system | GB/T 13466-2006 | 2006-12-1 |
| Technical specification for general purposes axial fans | JB/T 10562-2006 | 2006-10-11 |
| Technical specification for general purposes centrifugal fans | JB/T 10563-2006 | 2006-10-11 |
| Dry screw air compressor for general use -- Specifications | JB/T 10598-2006 | 2006-10-11 |
| Stationary air compressors - Safety rules and code of practice | GB 10892-2005 | 2006-8-1 |
| Stationary air compressors-Safety rules and code of practice | GB/T 10892-2005 | 2006-8-1 |
| Specifications for environmental protection product -- Roots blower | HJ/T 251-2006 | 2006-6-1 |
| Industrial fan—Performance testing of jet fans | GB/T 19843-2005 | 2006-1-1 |
| Reciprocating piston compressor connecting rod small end bushing | JB/T 2236-2005 | 2006-1-1 |
| verspeed test for industrial fan impeller | JB/T 6445-2005 | 2006-1-1 |
| Axial fan for metro specification | JB/T 10533-2005 | 2006-1-1 |
| Oil injected single screw compressor for general use | JB/T 10525-2005 | 2006-1-1 |
| Air-cooled sliding vane air compressor for tank trucks | JB/T 5233-2005 | 2006-1-1 |
| Adsorption compressed air dryers for general use | JB/T 10532-2005 | 2006-1-1 |
| Refrigeration compressed air dryers for general use | JB/T 10526-2005 | 2006-1-1 |
| Purging for compressed air—Vocabulary | JB/T 7664-2005 | 2006-1-1 |
| Specification for non-lubricated reciprocating type foods carbon-dioxide compressors | JB/T 7238-2005 | 2006-1-1 |
| Packaging technical condition of displacement compressors | JB/T 7663.1-2005 | 2006-1-1 |
| Reciprocating piston air compressor for general use—Main components—Specifications | JB/T 7240-2005 | 2006-1-1 |
| Gas engine-compressor | JB/T 6907-2005 | 2006-1-1 |
| Technical terms for industry fans,turbo-blowers and compressors | JB/T 2977-2005 | 2005-11-1 |
| Safety inspecting-testing specification of in-service air compressor for coal mine | AQ 1013-2005 | 2005-8-1 |
| Technical specification for mine centrifugal fan | JB/T 4355-2004 | 2005-4-1 |
| Technical Condition of Cast Steel Used for Fan Blower and Compressor | JB/T 6888-2004 | 2005-4-1 |
| Technical specification for silencer of fan | JB/T 6891-2004 | 2005-4-1 |
| General Specifications for Packaging of Fans Blowers Compressors | JB/T 6444-2004 | 2005-4-1 |
| Technical specification for tunnel jet fans | JB/T 10489-2004 | 2005-4-1 |
| Technical Condition of Cast Iron for Fans Blower and Compressors | JB/T 6887-2004 | 2005-4-1 |
| Diaphragm compressor | JB/T 6905-2004 | 2004-11-1 |
| Screw refigerant compressort | GB/T 19410-2003 | 2004-6-1 |
| Measurement and evaluation of mechanical vibration of displacement compressors | GB/T 7777-2003 | 2004-5-1 |
| Determination of sound level for noise emitted by displacement compressors | GB/T 4980-2003 | 2004-5-1 |
| Industrial fans - Mechanical safety of fans - Guarding | GB/T 19074-2003 | 2003-9-1 |
| Industrial fans—Vocabulary and definiations of categories | GB/T 19075-2003 | 2003-9-1 |
| Reciprocating piston minitype air compressor | GB/T 13928-2002 | 2003-6-1 |
| Packaged,integrally geared centrifugal air compressors for petroleum,chemical,and gas industry services | JB/T 4113-2002 | 2003-4-1 |
| Centrifugal compressors for petroleum,chemical,and Gas service industries | JB/T 6443-2002 | 2003-4-1 |
| Stationary reciprocating piston air compressor for general use | GB/T 13279-2002 | 2002-8-1 |
| Vocabulary of terms for Chemical industry centrifugal compressor | HG/T 3186-1987 | 2001-10-1 |
| Vocabulary of terms for chemical industry axial flow compressor | HG/T 3185-1987 | 2001-10-1 |
| Vocabulary of terms for chemical industry reciprocating compressor | HG/T 3184-1987 | 2001-10-1 |
| The natural gas compressor for the vehicle gas station | JB/T 10298-2001 | 2001-6-22 |
| Technical Specifications for Energy Conservation Product Certification for air compressors vocabulary-General | CCEC/T 08-2001 | 2001-5-1 |
| Industrial fans-Performance testing using standardized airways | GB/T 1236-2000 | 2001-2-1 |
| Specifications of Riveting and Welding Part for Fans | JB/T 10214-2000 | 2001-1-1 |
| Specifications for Fan Welding Inspection | JB/T 10213-2000 | 2001-1-1 |
| Receiver of stationary reciprocating piston air compressors | JB/T 8867-2000 | 2000-10-1 |
| Fan Rotor Balance | JB/T 9101-1999 | 2000-1-1 |
| The basic parameters and sizes of the rotor of screw compressor and timing gear | JB/T 2409-1999 | 2000-1-1 |
| Centrifugal IF-FAN and ID-FAN for boiler of power station | JB/T 4358-1999 | 2000-1-1 |
| Reciprocating compressors - Vocabulary | JB/T 9107-1999 | 2000-1-1 |
| Power station axial fans | JB/T 4362-1999 | 2000-1-1 |
| Thermodynamic Performance Test for Centrifugal & Axial Blower and Compressor | JB/T 3165-1999 | 2000-1-1 |
| Reciprocating piston compressor metal rectangle packing - Part 5：Tensile spring for sealing and wiper rings | JB/T 9102.5-1999 | 2000-1-1 |
| Lubricator | JB/T 9106-1999 | 2000-1-1 |
| Specification for reciprocating piston acetylene compressor | JB/T 9103.1-1999 | 2000-1-1 |
| Displacement compressors - Methods for model designation | JB/T 2589-1999 | 2000-1-1 |
| Methods of performance test for reciprocating piston acetylene compressor | JB/T 9103.2-1999 | 2000-1-1 |
| Displacement compressor—Acceptance tests | GB/T 3853-1998 | 1999-7-1 |
| Industrial fans--Dimensions | GB/T 17774-1999 | 1999-1-1 |
| Basic types sizes parameters and characteristics of fans | GB/T 3235-1999 | 1999-1-1 |
| Compressors for the process industry—Turbo types—Specifications and data sheets for their design and construction | GB/T 16941-1997 | 1998-4-1 |
| lubrication, shaft-sealing, and control-oil systems for special-purpose applications | JB/T 4365-1997 | 1998-1-1 |
| Explosion Proof Fanner Technical Conditions | JB/T 8523-1997 | 1997-10-1 |
| Coating Specifications for Displacement Compressors | JB/T 7663.2-1995 | 1996-7-1 |
| Terminology of Cooling and Warming Ventilation Equipment | JB/T 4303-1995 | 1996-7-1 |
| Specification for Basic Design of Piston Compressors | HG/T 20554-1993 | 1996-3-1 |
| Methods of flow measurement for displacement compressor | GB/T 15487-1995 | 1995-10-1 |
| Displacement compressors vocabulary－General | GB/T 4975-1995 | 1995-10-1 |
| Specifications for the Truck-mounted Displacement Air Compressor Unit | JB/T 4223-1994 | 1995-7-1 |
| Fan Heater | JB/T 7225-1994 | 1995-7-1 |
| Rule for the inspection of head of miniature reciprocal piston compressor for export | SN/T 0319-1994 | 1995-5-1 |
| Technical specification for fume extractors for tubular electric welding | LD 51-1994 | 1995-1-1 |
| Requirements of readiness and methods of inspection and assessment for Roots blowers | SJ/T 31403-1994 | 1994-6-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Screw Air Compressors | SJ/T 31406-1994 | 1994-6-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Small Refrigeration Compressors | SJ/T 31461-1994 | 1994-6-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Piston Compressors | SJ/T 31405-1994 | 1994-6-1 |
| Requirements of Readiness and Methods of Inspection and Assessment for Centrifugal Blowers | SJ/T 31404-1994 | 1994-6-1 |
| Steel Pressure Vessel for Micro-air Compressor | JB/T 6539-1992 | 1993-7-1 |
| Miniature cross-flow fan | GB/T 13933-1992 | 1993-6-1 |
| Reciprocating piston micro air compressor | GB/T 13928-1992 | 1993-6-1 |
| Model Designation Method of Compressed Air Cleaning Equipment | JB/T 6432-1992 | 1993-1-1 |
| Vertical Fan-Coil Unit | JB/T 6415-1992 | 1993-1-1 |
| General Specifications for Packaging of Fans Blowers Compressors | JB/T 6444-1992 | 1993-1-1 |
| Economical operation and calculation methods for fans(pumps、compressors) system of alternating-current electric drive | GBT13466~13470-1992 | 1992-10-1 |
| Economical operation for industrial centrifugal, mixed flow, axial flow and vortex pump systems | GB/T 13469-1992 | 1992-10-1 |
| The general principles of economical operation for fans (pumps, compressors) system of alternating-current electric drive | GB/T 13466-1992 | 1992-10-1 |
| Sound limit of central station air hardling units | GB 13326-1991 | 1992-10-1 |
| The general principles of economical operation for fans (pumps, compressors) system of alternating-current electric drive | GB/T 13470-1992 | 1992-10-1 |
| Technical specification for general purposes centrifugal fans | GB/T 13275-1991 | 1992-8-1 |
| Dry screw air compressor for general use－Specifications | GB/T 13278-1991 | 1992-8-1 |
| Technical specification for general purposes axiae fans | GB/T 13274-1991 | 1992-8-1 |
| Compressed air for general use－Quality classes | GB/T 13277-1991 | 1992-8-1 |
| Methods of noise measurement for fans, blowers compressors and Roots blowers | GB/T 2888-1991 | 1992-8-1 |
| Screw compressor for the process industry - Specifications | GB/T 13280-1991 | 1992-8-1 |
| Humidifier for Air Conditioning Equipment - Performance Test Methods | JB/T 5146.3-1991 | 1992-7-1 |
| Magnetic Particle Inspection of Key Components of Compressor | JB/T 5442-1991 | 1992-7-1 |
| Humidifier for Air Conditioning Equipment - Type and Basic Parameter | JB/T 5146.1-1991 | 1992-7-1 |
| Ultrasonic Flaw Detection of Casting Steel Component of Compressor | JB/T 5441-1991 | 1992-7-1 |
| Positive Displacement Natural Gas Compressor for Petroleum Industry - Basic Parameter | JB/T 5297-1991 | 1992-7-1 |
| Coil Tube - Coil Tube and Fan Air Conditioning Heating System - General Terminology | JB 4303-1986 | 1992-7-1 |
| Ultrasonic Flaw Detection of Forged Steel Component of Compressor | JB/T 5440-1991 | 1992-7-1 |
| Ultrasonic Flaw Detection of Nodular Cast Iron Component of Compressor | JB/T 5439-1991 | 1992-7-1 |
| Technical specification for construction of centrifugal compressor trains in ethene plants | SHJ 519-1991 | 1992-5-20 |
| Stationary air compressors-Safety rules and code of practice | GB 10892-1989 | 1990-1-1 |
| Safety requirements for air handling units | GB 10891-1989 | 1990-1-1 |
| Site testing of fans | GB/T 10178-1988 | 1989-7-1 |
| Determination of sound power levels for noise emitted by heating ventilating and air conditioning equipment - Engineering method | GB/T 9068-1988 | 1989-1-1 |
| Determination of sound power lever for noise emitted by displacement compressors; Survey method | GB 7022-1986 | 1987-7-1 |
| The methods of performance test for positive displacement refrigerant compressors | GB/T 5773-1986 | 1986-8-1 |
| F4.3Q Fully-enclosed Piston Type Refrigeration Compressor | HBM 48-1986 | 1986-4-1 |
| Displacement compressors--Vocabulary | GB 4975-1985 | 1985-12-1 |
| Compressors - Classification | GB/T 4976-1985 | 1985-12-1 |
| Methods of performance test for general displacement air compressor | GB 3853-1983 | 1984-5-1 |
