Title |
Standard No. |
Implemented On |
Self-propelled scissors aerial work platform | T/ZZB 0116-2016 | |
Tower cranes — Hoisting winch | JB/T11156-2011 | 2021-1-1 |
Safety devices against over1oading for lifting appliances | GB/T 12602-2020 | 2020-10-1 |
Cranes—Hand signals | GB/T 5082-2019 | 2020-7-1 |
Tower crane | GB/T 5031-2019 | 2020-3-1 |
Safety monitoring system for builders hoist | GB/T 37537-2019 | 2020-1-1 |
Tower crane safety monitor system and data transmission specifications | GB/T 37366-2019 | 2019-10-1 |
Cranes—Information to be provided—Part 3:Tower cranes | GB/T 18874.3-2018 | 2019-7-1 |
Cranes—Monitoring for crane design working period | GB/T 25196-2018 | 2019-7-1 |
Forged steel lifting hooks with latch,grade 8 | GB/T 24813-2018 | 2019-7-1 |
Business machines—Minimum informationto be included in specification sheets of duplicators | GB/T 18338-2018 | 2019-4-1 |
Discard qualification for ladle crane | GB/T 36697-2018 | 2019-4-1 |
Safety assessment code of practice of rack and pinion hoists for persons and materials | GB/T 36152-2018 | 2018-12-1 |
Cranes—Design principles for loads and load combinations—Part 1:General | GB/T 22437.1-2018 | 2018-12-1 |
Vehicle-mounted mobile elevating work platform | GB/T 9465-2018 | 2018-12-1 |
Cranes-Tolerances for wheels and travel and traversing tracks-Part 1:General | GB/T 10183.1-2018 | 2018-12-1 |
Load lifting attachments—Classification | GB/T 35975-2018 | 2018-9-1 |
Temporarily installed suspended access equipment | GB/T 19155-2017 | 2018-8-1 |
Building maintenance unit | GB/T 19154-2017 | 2018-8-1 |
Electrical safety of machinery-Electrical equipment of machines- Part 32:Requirements for hoisting machines | GB/T 5226.32-2017 | 2018-7-1 |
Mobile cranes—Limits and measurement methods for operating noise | GB/T 20062-2017 | 2018-7-1 |
Cranes - Vocabulary - Part 2: Mobile cranes | GB/T 6974.2-2017 | 2018-5-1 |
Cranes―Access, guards and restraints―Part 4:Jib cranes | GB/T 24818.4-2017 | 2018-5-1 |
Maintenance platform for boiler furnace | T/CEC 162-2018 | 2018-4-1 |
Round steel short link chains for general lifting purposes--Grade 8, medium to lerance sling chains for chain slings | GB/T 24816-2017 | 2018-4-1 |
Pinion type progressive safety device for builders hoist | GB/T 34025-2017 | 2018-2-1 |
Code of practice for the safety use of builders’hoists | GB/T 34023-2017 | 2018-2-1 |
Boiler furnace maintenance elevating platform | GB/T 34029-2017 | 2018-2-1 |
General technical requirement for lifting magnets | GB/T 33545-2017 | 2018-2-1 |
Lifting appliances―Code of inspection and maintenance―Part 12:Floating cranes | GB/T 31052.12-2017 | 2017-12-1 |
Lifting appliances―Code of inspection and maintenance―Part 4:Jib cranes | GB/T 31052.4-2017 | 2017-12-1 |
Installation quality inspection code of rack and pinion hoists for persons and materials | GB/T 33640-2017 | 2017-12-1 |
Mobile suspended work platform | GB/T 33504-2017 | 2017-9-1 |
Forged steel lifting components of grade 8 | GB/T 25852-2017 | 2017-9-1 |
Continuous shiploader for bulk materials―Type and basic parameter | GB/T 33079-2016 | 2017-5-1 |
Cranes一Classification-Part 2:Mobile cranes | GB/T 20863.2-2016 | 2017-5-1 |
Cranes-Cabins and control stations-Part 3:Tower cranes | GB/T 20303.3-2016 | 2017-5-1 |
Cranes一Anchoring devices for in一service and out-of-service conditions一 Part 4:Jib cranes | GB/T 31051.4-2016 | 2017-5-1 |
Cranes―Vocabulary―Part 4:Jib cranes | GB/T 6974.4-2016 | 2017-5-1 |
Cranes一Control layout and characteristics一 Part 3:Tower cranes | GB/T 24817.3-2016 | 2017-5-1 |
Mobile elevating work platforms一 Symbols for operator controls and other' displays | GB/T 33081-2016 | 2017-5-1 |
Lifting appliances--Code of inspection and maintenance--Part 6: Cable cranes | GB/T 31052.6-2016 | 2017-5-1 |
Lifting appliances--Code of inspection and maintenance-- Part 2:Mobile cranes | GB/T 31052.2-2016 | 2017-5-1 |
Safety assessment code for tower cranes | GB/T 33080-2016 | 2017-5-1 |
Mechanical parking systems - Safety requirements for the application and operation | GB/T 33082-2016 | 2017-5-1 |
Lifting appliances-Code of inspection and maintenance-- Part3:Tower cranes | GB/T 31052.3-2016 | 2017-5-1 |
Cranes―Control layout and characteristics―Part 1:General principles | GB/T 24817.1-2016 | 2017-5-1 |
Lifting appliances―Code of inspection and maintenance―Part 8:Railway cranes | GB/T 31052.8-2016 | 2017-5-1 |
Cranes―Inspections―Part 1:General | GB/T 23724.1-2016 | 2016-9-1 |
Acoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes | GB/T 32544-2016 | 2016-9-1 |
Lifting appliances―Code of inspection and maintenance―Part 7:Derrick cranes | GB/T 31052.7-2016 | 2016-9-1 |
Lifting appliances―Code of inspection and maintenance―Part 10:Series lifting equipment | GB/T 31052.10-2016 | 2016-9-1 |
Lifting appliances―Code of inspection and maintenance―Part 5:Bridge and gantry cranes | GB/T 31052.5-2015 | 2016-7-1 |
Cranes―Vocabulary―Part 6:Railway cranes | GB/T 6974.6-2016 | 2016-6-1 |
Cranes—Cabins and control stations—Part 1: General | GB/T 20303.1-2016 | 2016-6-1 |
Lifting appliances―Code of inspection and maintenance―Part 11:Mechanical parking systems | GB/T 31052.11-2015 | 2016-5-1 |
Mobile elevating work platforms―Design, calculations, safety requirements and test methods relative to special features―Part 1: MEWPs with retractable guardrail systems | GB/T 30032.1-2015 | 2015-7-1 |
Energy efficiency test methods for metallurgy cranes | GB/T 31050-2014 | 2015-6-1 |
Cranes―Anchoring devices for in-service and out-of-service conditions―Part 1:General | GB/T 31051.1-2014 | 2015-6-1 |
Lifting appliances―Code of inspection and maintenance―Part 1:General | GB/T 31052.1-2014 | 2015-6-1 |
Safety rules for lifting appliances―Part 5:Bridge and gantry cranes | GB 6067.5-2014 | 2015-2-1 |
Buildershoists for goods―Part 2:Inclined hoists with non-accessible load carrying devices | GB 10054.2-2014 | 2014-12-1 |
Builders hoists for goods―Part 1: Hoists with accessible platforms | GB 10054.1-2014 | 2014-12-1 |
Cranes - Stiffness - Bridge and Gantry Cranes | GB/T 30561-2014 | 2014-12-1 |
Energy efficiency test methods for industrial brakes | GB/T 30221-2013 | 2014-7-1 |
Energy Efficiency Test Procedures for Electric Driven Lifting Mechanism of Cranes | GB/T 30222-2013 | 2014-7-1 |
Energy Efficiency Test Procedures for Electric Driven Travelling Mechanism of Cranes | GB/T 30223-2013 | 2014-7-1 |
Cranes - Proof of Competence of Steel Structures | GB/T 30024-2013 | 2014-3-1 |
Energy Efficiency Test Methods for Electrical Hoists | GB/T 30028-2013 | 2014-3-1 |
Mobile elevating work platforms—Design,calculations,safety requirements and test methods relative to special features—Part 2:MEWPs with non-conductive(insulating) components | GB/T 30032.2-2013 | 2014-3-1 |
Short Link Chains for Lifting Purposes - Grade VH, Fine Tolerance for Manually Operated Chain Hoists | GB/T 30027-2013 | 2014-3-1 |
Cranes - Measurement of the Mass of A Crane and Its Components | GB/T 30025-2013 | 2014-3-1 |
Short Link Chains for Lifting Purposes - Grade TH, Fine Tolerance for Manually Operated Chain Hoists | GB/T 30026-2013 | 2014-3-1 |
Cranes - Availability - Vocabulary | GB/T 30023-2013 | 2014-3-1 |
Lifting appliances—Range of maximum capacities for basic models | GB/T 783-2013 | 2014-3-1 |
Fixed-base crane for harbor | GB/T 29561-2013 | 2014-1-1 |
Energy efficiency test procedures of motors for crane—Part 3:Conical rotor 3-phase asynchronous motors | GB/T 29562.3-2013 | 2014-1-1 |
Energy efficiency test procedures of motors for crane—Part 2:YZR/YZ series 3-phase asynchronous motors | GB/T 29562.2-2013 | 2014-1-1 |
Portal slewing crane | GB/T 29560-2013 | 2014-1-1 |
Energy efficiency test procedures of motors for crane—Part 1: YZP series of variable-frequency adjustable-speed 3-phase asynchronous motors | GB/T 29562.1-2013 | 2014-1-1 |
Technical requirements of waste grab cranes in municipal solid waste incineration plant | CJ/T 432-2013 | 2013-10-1 |
Cranes other than mobile,tower and floating cranes and tower cranes - General requirements for stability | GB/T 28757-2012 | 2013-2-1 |
Safety rules for simple lifts | GB 28755-2012 | 2013-2-1 |
Cranes - Competency requirements for crane inspectors | GB/T 28758-2012 | 2013-2-1 |
Cable cranes | GB/T 28756-2012 | 2013-2-1 |
Safety rules for automobile lift | GB 27695-2011 | 2012-12-1 |
Specifications for metallurgy cranes ?— Part5:Ladle cranes | JB/T 7688.5-2012 | 2012-11-1 |
Lifting appliances—Managing system of safety monitoring | GB/T 28264-2012 | 2012-7-1 |
All terrain crane | GB/T 27996-2011 | 2012-7-1 |
Shipbuilding gantry crane | GB/T 27997-2011 | 2012-7-1 |
Balance crane | GB/T 27998-2011 | 2012-7-1 |
Cranes—Test code and procedures | GB/T 5905-2011 | 2012-6-1 |
Forged steel eyebolts grade 4 for general lifting purposes | GB/T 27696-2011 | 2012-6-1 |
Hydraulic bottle jacks | GB/T 27697-2011 | 2012-6-1 |
Level circulating mechanical parking system | GB/T 27545-2011 | 2012-5-1 |
Builders hoists for persons and materials with vertically guided cages | GB 26557-2011 | 2012-5-1 |
Elevating work platforms—Mast-climbing work platforms | GB/T 27547-2011 | 2012-5-1 |
Mobile elevating work platforms—Safety principles,inspection,maintenance and operation | GB/T 27548-2011 | 2012-5-1 |
Sheaves for cranes | GB/T 27546-2011 | 2012-5-1 |
Mobile elevating work platform—Operator(driver) training | GB/T 27549-2011 | 2012-5-1 |
General specification for launching machine | GB/T 26470-2011 | 2012-4-1 |
Safety code for launching machine | GB 26469-2011 | 2012-4-1 |
En—Masse conveyer | GB/T 10596-2011 | 2011-12-1 |
Mobile cranes - Drum and sheave sizes | GB/T 26472-2011 | 2011-12-1 |
Hydraulic hoister | GB/T 14627-2011 | 2011-12-1 |
Mechanical parking system - Vocabulary | GB/T 26476-2011 | 2011-12-1 |
Container reach stacker - Specifications | GB/T 26474-2011 | 2011-12-1 |
Mechanical parking systems—General safety requirement | GB 17907-2010 | 2011-12-1 |
Bridge type grab ship unloader | GB/T 26475-2011 | 2011-12-1 |
Gantry crane for general purpose | GB/T 14406-2011 | 2011-12-1 |
Cranes - Safety requirements for loader cranes | GB/T 26473-2011 | 2011-12-1 |
Hoisting hoister | GB/T 10597-2011 | 2011-12-1 |
Derrick cranes | GB/T 26558-2011 | 2011-12-1 |
Mechanical parking system - Classification | GB/T 26559-2011 | 2011-12-1 |
Cranes - Design calculation for rail wheels and associated trolley track supporting structure - Part 1: General | GB/T 26477.1-2011 | 2011-12-1 |
Mobile elevating work platforms—Design calculations,safety requirements and test methods | GB 25849-2010 | 2011-12-1 |
Tower crane - The rules of installation and disassembly | GB/T 26471-2011 | 2011-12-1 |
Bridge crane for general purpose | GB/T 14405-2011 | 2011-12-1 |
Crawler cranes | GB/T 14560-2011 | 2011-12-1 |
Tower cranes — Hoisting winch | JB/T 11156-2011 | 2011-11-1 |
explosion-proof hoists | JB/T 10222-2011 | 2011-11-1 |
Mobile cranes — Sheaves | JB/T 11209-2011 | 2011-11-1 |
Tower cranes — Steel structure manufacturing and testing | JB/T 11157-2011 | 2011-11-1 |
explosion-proof cranes with electric hoist | JB/T 10219-2011 | 2011-11-1 |
Rack and pinion jacks | JB/T 11101-2011 | 2011-11-1 |
Beam-type lifting device | GB/T 26079-2010 | 2011-10-1 |
Lifting hooks—Part 7:Ramshorn shank hooks | GB/T 10051.7-2010 | 2011-9-1 |
Lifting hooks—Part 9:Cross pieces | GB/T 10051.9-2010 | 2011-9-1 |
Lifting hooks—Part 15:Laminated hooks with point | GB/T 10051.15-2010 | 2011-9-1 |
Lifting hooks—Part 5:Shank hooks with point | GB/T 10051.5-2010 | 2011-9-1 |
Lifting hooks—Part 2:Technical conditions for forged hooks | GB/T 10051.2-2010 | 2011-9-1 |
Lifting hooks—Part 14:Inspection of laminated hooks in service | GB/T 10051.14-2010 | 2011-9-1 |
Lifting hooks—Part 10:Hook nuts | GB/T 10051.10-2010 | 2011-9-1 |
Lifting hooks—Part 13:Technical conditions for laminated hooks | GB/T 10051.13-2010 | 2011-9-1 |
Lifting hooks—Part 12:Safety latch for lifting hook | GB/T 10051.12-2010 | 2011-9-1 |
Lifting hooks—Part 6:Blanks of ramshorn shank hooks | GB/T 10051.6-2010 | 2011-9-1 |
Lifting hooks—Part 8:Blanks of cross pieces for hooks | GB/T 10051.8-2010 | 2011-9-1 |
Lifting hooks—Part 11:Securing plates for hook nuts | GB/T 10051.11-2010 | 2011-9-1 |
Lifting hooks—Part 3:Inspection of forged hooks in service | GB/T 10051.3-2010 | 2011-9-1 |
Lifting hooks—Part 4:Blanks of shank hook with point | GB/T 10051.4-2010 | 2011-9-1 |
Links of grade 8 for use with slings | GB/T 25855-2010 | 2011-6-1 |
Cranes—Design principles for loads and load combinations—Part 4:Jib cranes | GB/T 22437.4-2010 | 2011-6-1 |
Lifting hooks—Part 1:Mechanical properties,lifting capacities,stresses and materials | GB/T 10051.1-2010 | 2011-6-1 |
Lifting appliances—Controls—Layout and characteristics—Part 2:Mobile cranes | GB/T 24817.2-2010 | 2011-6-1 |
Cranes—Training of appointed persons | GB/T 25850-2010 | 2011-6-1 |
Cranes—Design principles for loads and load combinations—Part 2:Mobile cranes | GB/T 22437.2-2010 | 2011-6-1 |
Chain slings assembled by methods other than welding—Grade 8 | GB/T 25853-2010 | 2011-6-1 |
Safety rules for lifting appliances—Part 1:General | GB 6067.1-2010 | 2011-6-1 |
Cranes—Tolerances for wheels and travel and traversing tracks—Part 4:Jib Cranes(ISO 12488-4:2004,IDT) | GB/T 10183.4-2010 | 2011-6-1 |
Cranes—Tolerances for wheels and travel and traversing tracks—Part 1:Genera | GB/T 10183.1-2010 | 2011-6-1 |
Cranes—Crane driving manual—Part 2:Mobile cranes | GB/T 17909.2-2010 | 2011-6-1 |
Forged steel lifting components for use with grade 8 chain | GB/T 25852-2010 | 2011-6-1 |
Forged shackles for general lifting purposes—Dee shackles and bow shackles | GB/T 25854-2010 | 2011-6-1 |
Mobile cranes—Experimental determination of crane performance—Part 1:Tipping loads and radii | GB/T 25851.1-2010 | 2011-6-1 |
Cranes—Access,guards and restrains—Part 2:Mobile cranes | GB/T 24818.2-2010 | 2011-6-1 |
Cranes—Information labels—Part 3:Tower cranes | GB/T 23725.3-2010 | 2011-6-1 |
Cranes - Inspections - Part 3: Tower cranes | GB/T 23724.3-2010 | 2011-2-1 |
Cranes - Graphic symbols - Part 1: General | GB/T 25195.1-2010 | 2011-2-1 |
Cranes - Graphical symbols - Part 3: Tower cranes | GB/T 25195.3-2010 | 2011-2-1 |
Cranes—Safe use—Part 4:Jib cranes | GB/T 23723.4-2010 | 2011-2-1 |
Cranes—Vocabulary—Part 2:Mobile cranes | GB/T 6974.2-2010 | 2011-2-1 |
Cranes—Training of drivers—Part 3:Tower cranes | GB/T 23720.3-2010 | 2011-2-1 |
Cranes - Graphical symbols - Part 2:Mobile cranes | GB/T 25195.2-2010 | 2011-2-1 |
Cranes - Condition monitoring - Part 1:General | GB/T 25196.1-2010 | 2011-2-1 |
Cranes - Safe use - Part 3: Tower cranes | GB/T 23723.3-2010 | 2011-2-1 |
Safety rules of lifting appliances for water resources and electric power construction | SL 425-2008 | 2010-12-17 |
Type and parameters dimensions for SWL wormwheel screw hoists | JB/T 8809-2010 | 2010-10-1 |
Cranes—Limiting and indicating devices—Part 3:Tower cranes | GB/T 24810.3-2009 | 2010-7-1 |
Cranes and lifting appliances—Selection of wire ropes—Part 1:General | GB/T 24811.1-2009 | 2010-7-1 |
Short link chain for lifting purposes-Grade 6,non-calibrated,for chain slings etc. | GB/T 24815-2009 | 2010-7-1 |
Cranes—Requirements for mechanisms—Part 1:General | GB/T 24809.1-2009 | 2010-7-1 |
Forged steel lifting hooks with point and eye for use with steel chains of grade 8 | GB/T 24813-2009 | 2010-7-1 |
Cranes—Controls—Layout and characteristics—Part 3:Tower cranes | GB/T 24817.3-2009 | 2010-7-1 |
Forged steel lifting hooks with point and eye for use with steel chains of grade 4 | GB/T 24812-2009 | 2010-7-1 |
Cranes—Limiting and indicating devices—Part 5:Bridge and gantry cranes | GB/T 24810.5-2009 | 2010-7-1 |
Lifting appliances—Controls—Layout and characteristics—Part 5:Bridge and gantry cranes | GB/T 24817.5-2009 | 2010-7-1 |
Cranes—Access,guards and restraints—Part 1:General | GB/T 24818.1-2009 | 2010-7-1 |
Short link chain for lifting purposes—Grade 8,non-calibrated,for chain slings etc. | GB/T 24816-2009 | 2010-7-1 |
Cranes—Limiting and indicating devices—Part 1:General | GB/T 24810.1-2009 | 2010-7-1 |
Short link chain for lifting purposes—Grade 4,non-calibrated,for chain slings etc. | GB/T 24814-2009 | 2010-7-1 |
Cranes—Requirements for mechanisms—Part 5:Bridge and gantry cranes | GB/T 24809.5-2009 | 2010-7-1 |
Cranes—Wire ropes—Care,maintenance,installation,examination and discard | GB/T 5972-2009 | 2010-7-1 |
Lifting appliances—Controls—Layout and characteristics—Part 1:General principles | GB/T 24817.1-2009 | 2010-7-1 |
Cranes—Requirements for mechanisms—Part 3:Tower cranes | GB/T 24809.3-2009 | 2010-7-1 |
Cranes—Limiting and indicating devices—Part 2:Mobile cranes | GB/T 24810.2-2009 | 2010-7-1 |
Cranes—Access,guards and restraints—Part 5:Bridge and gantry cranes | GB/T 24818.5-2009 | 2010-7-1 |
Cranes—Information to be provided—Part 3:Tower cranes | GB/T 18874.3-2009 | 2010-7-1 |
Cranes—Access,guards and restraints—Part 3:Tower cranes | GB/T 24818.3-2009 | 2010-7-1 |
Cranes—Controls—Layout and characteristics—Part 4:Jib cranes | GB/T 24817.4-2009 | 2010-7-1 |
Cranes—Limiting and indicating devices—Part 4:Jib cranes | GB/T 24810.4-2009 | 2010-7-1 |
Cranes—Requirements for mechanisms—Part 4:Jib cranes | GB/T 24809.4-2009 | 2010-7-1 |
Cranes and lifting appliances—Selection of wire ropes—Part 2:Mobile cranes—Coefficient of utilization | GB/T 24811.2-2009 | 2010-7-1 |
Cranes—Access,guards and restraints—Part 5:Bridge and gantry cranes | DB14/T 551-2009 | 2010-1-31 |
Cranes - Training of drivers - Part 1: General | GB/T 23720.1-2009 | 2010-1-1 |
Cranes - Competency repuirements for crane drivers(operators) slingers signallers and assessors | GB/T 23722-2009 | 2010-1-1 |
Cranes - Information labels - Part 1: General | GB/T 23725.1-2009 | 2010-1-1 |
Cranes - Safe use - Part 1: General | GB/T 23723.1-2009 | 2010-1-1 |
Cranes - Inspections - Part 1: General | GB/T 23724.1-2009 | 2010-1-1 |
Cranes - Training of slingers and signallers | GB/T 23721-2009 | 2010-1-1 |
Lifting appliances-safety devices against overloading | GB/T 12602-2009 | 2010-1-1 |
Cranes - Information to be provided - Part 4: Jib cranes | GB/T 18874.4-2009 | 2010-1-1 |
Lifting Appliances-safety Devices against Overloading | GB 12602-2009 | 2010-1-1 |
Test code for truck crane and mobile crane | GB/T 6068-2008 | 2009-5-1 |
Cranes - Design principles for loads and load combinations - Part 5: Overhead traveling and portal bridge cranes | GB/T 22437.5-2008 | 2009-5-1 |
Cranes - Design principles for loads and load combinations - Part 3: Tower cranes | GB/T 22437.3-2008 | 2009-5-1 |
Cranes - Design principles for loads and load combinations - Part 1: General | GB/T 22437.1-2008 | 2009-5-1 |
Regulation for Periodicity Inspection of Lifting Appliances | TSG Q7015-2008 | 2009-4-1 |
Cranes - Requirments for test loads | GB/T 22415-2008 | 2009-4-1 |
Cranes - Measurement of velocity and time parameters | GB/T 22414-2008 | 2009-4-1 |
Cranes - Vocabulary - Part 1: General | GB/T 6974.1-2008 | 2009-4-1 |
Cranes - Maintenance - Part 1: General | GB/T 22416.1-2008 | 2009-4-1 |
Cranes - Vocabulary - Part 5: Bridge and gantry cranes | GB/T 6974.5-2008 | 2009-4-1 |
Crane - Vocabulary - Part 3: Tower crane | GB/T 6974.3-2008 | 2009-2-1 |
Non-calibrated round steel link lifting chain and chain slings - Use and maintenance | GB/T 22166-2008 | 2009-2-1 |
Aluminium-alloy swaged ferrules for steel wire rope | GB/T 6946-2008 | 2009-2-1 |
Tower crane | GB/T 5031-2008 | 2009-2-1 |
Rail wheels for crane | JB/T 6392-2008 | 2008-11-1 |
Electric under slung crane | JB/T 2603-2008 | 2008-11-1 |
Gantry Crane with Electric Hoist | JB/T 5663-2008 | 2008-11-1 |
Gantry cranes for hydroelectric power station | JB/T 6128-2008 | 2008-11-1 |
Electric single girder carane | JB/T 1306-2008 | 2008-11-1 |
Specifications for metaallurgy crenes-Part1:General requirements | JB/T 7688.1-2008 | 2008-11-1 |
Specifiations for metallurgy cranes-Part 2:Scrap charing cranes | JB/T 7688.2-2008 | 2008-11-1 |
Overhead crane with electric hoist | JB/T 3695-2008 | 2008-11-1 |
Specifications fof metallurgy cranes--Part3:Forge cranes | JB/T 7688.3-2008 | 2008-11-1 |
Specifications for metallurgy cranes--Part6:Quenching cranes | JB/T 7688.6-2008 | 2008-11-1 |
Design rules for cranes | GB/T 3811-2008 | 2008-11-1 |
Specifications for metallurgy cranes--Part 7:Claw cranes | JB/T 7688.7-2008 | 2008-11-1 |
Grane Installation,Modernization & General overhaul Supervision Inspection Regulation | TSG Q7016-2008 | 2008-8-7 |
Cranes and related equipment—Accuracy requirements for measuring parameters during testing(ISO 9373:1989 IDT) | GB/T 21457-2008 | 2008-8-1 |
Mobile cranes - Presentation of rated capacity charts | GB/T 21458-2008 | 2008-8-1 |
The polyurethane buffer for cranes | JB/T 10833-2008 | 2008-7-1 |
Screw jacks | JB/T 2592-2008 | 2008-7-1 |
Type Test Rule for Safety Accessories and Safety Protection Device for Lifting Appliances | TSG Q7014-2008 | 2008-6-1 |
Type Test Rules for Mobile Crane | TSG Q7005-2008 | 2008-4-30 |
Type Test Rule for lifting Equipments | TSG Q7012-2008 | 2008-4-30 |
Electric chain hoists | JB/T 5317-2007 | 2008-3-1 |
Manual trolleys | JB/T 7332-2007 | 2008-3-1 |
Chain hoists | JB/T 7334-2007 | 2008-3-1 |
Lever hoists | JB/T 7335-2007 | 2008-3-1 |
Textile slings-Safety -Part 2: Round slings made of man-made fibres for general purpose use | JB/T 8521.2-2007 | 2007-11-1 |
Short link chain for lifting purposes- General conditions of acceptance | GB/T 20946-2007 | 2007-11-1 |
Textile slings-Safety -Part 1:Flat woven webbing slings made of man-made fibres for general purpose use | JB/T 8521.1-2007 | 2007-11-1 |
Short-link chain for lifting purposes—Grade T (types T DAT and DT) fine-tolerance hoist chain | GB/T 20947-2007 | 2007-11-1 |
Safety Code for Tower Cranes | GB 5144-2006 | 2007-10-1 |
Type Test Rule for Portal Crane | TSG Q7007-2007 | 2007-10-1 |
Type Test Rule for Gantry Crane | TSG Q7003-2007 | 2007-10-1 |
Type Test Rule for Overhead Crane | TSG Q7002-2007 | 2007-10-1 |
Specifications of Spreader for 5D Freight Containers | TB/T 3179-2007 | 2007-8-20 |
Technical requirements for cable cranes | SL 375-2007 | 2007-8-11 |
Cranes - Classification - Part5: Overhead travelling and portal bridge cranes | GB/T 20863.5-2007 | 2007-8-1 |
Type Test Rule for Portal Crane | TSG Q7008-2007 | 2007-8-1 |
Cranes - Classification - Part2: Mobile cranes | GB/T 20863.2-2007 | 2007-8-1 |
Cranes - Classification - Part3: Tower cranes | GB/T 20863.3-2007 | 2007-8-1 |
Type Test Rule for Cable Crane | TSG Q7009-2007 | 2007-8-1 |
Type Test Rule for Derrick Crane | TSG Q7010-2007 | 2007-8-1 |
Cranes - Classification - Part1: General | GB/T 20863.1-2007 | 2007-8-1 |
Type Test Rule for Railway Crane | TSG Q7006-2007 | 2007-8-1 |
Cranes - Classification - Part4: Jib cranes | GB/T 20863.4-2007 | 2007-8-1 |
Chain slings of welded construction - Grades M(4) S(6) and T(8) | GB/T 20652-2006 | 2007-3-1 |
Specific purpose chassis of truck crane | JB/T 6042-2006 | 2007-2-1 |
Calibrated round steel link lifting chains - Guidelines to proper use and maintenance | GB/T 20305-2006 | 2007-1-1 |
Classification for lifting appliances | GB/T 20776-2006 | 2007-1-1 |
Cranes - Cabins - Part 3: Tower cranes | GB/T 20303.3-2006 | 2007-1-1 |
Tower cranes - Stability requirements | GB/T 20304-2006 | 2007-1-1 |
Cranes - Cabins - Part 4: Jib cranes | GB/T 20303.4-2006 | 2007-1-1 |
Cranes - Cabins - Part 1: General | GB/T 20303.1-2006 | 2007-1-1 |
Cranes - Cabins - Part 2: Mobile cranes | GB/T 20303.2-2006 | 2007-1-1 |
Cranes - Cabins - Part 5: Overhead travelling and portal bridge cranes | GB/T 20303.5-2006 | 2007-1-1 |
Type Test Rule for Tower Crane | TSG Q7004-2006 | 2007-1-1 |
Type Test Rule for Slewing Jib Crane | TSG Q7011-2006 | 2007-1-1 |
Cranes Manufacture Supervision Inspection Regulation | TSG Q7001-2006 | 2006-10-1 |
Non-destructive testing of lifting appliances - Ultrasonic testing of steel welds | JB/T 10559-2006 | 2006-10-1 |
General purpose thimbles for use with steel wire ropes | GB/T 5974.1-2006 | 2006-9-1 |
Cuneiform connector for use with steel wire ropes | GB/T 5973-2006 | 2006-9-1 |
Heavy thimbles for use with steel wire ropes | GB/T 5974.2-2006 | 2006-9-1 |
Clamping plates for fixing steel wire ropes | GB/T 5975-2006 | 2006-9-1 |
Wire rope grips | GB/T 5976-2006 | 2006-9-1 |
Wire ropes for cranes--Code of practice for examination and discard(ISO 4309:1990,IDT) | GB/T 5972-2006 | 2006-9-1 |
Mobile crawler crane - Limits and measurement methods for operating noise | GB 20062-2006 | 2006-8-1 |
Cranes--Overhead travelling cranes and portal bridge crames--Tolerances for cranes manufacture and tracks laying | GB/T 10183-2005 | 2006-4-1 |
Mobile cranes - Determination of stability | GB/T 19924-2005 | 2006-4-1 |
Lifting hook-Nomenclature | GB/T 4307-2005 | 2006-4-1 |
Test code for truck crane and mobile crane--Part2:Performance test | GB/T 6068.2-2005 | 2006-1-1 |
Test code for truck crane and mobile crane Part 3: Structure test | GB/T 6068.3-2005 | 2006-1-1 |
Inspection rules for the cranes for water resources and electric power construction | DL/T 454-2005 | 2005-6-1 |
Electric wire rope hoists - Part 2: Testing method | JB/T 9008.2-2004 | 2005-4-1 |
Aisle Stacking Crane - Types and Basic Parameters | JB 2960-1981 | 2003-10-1 |
Safety of Machinery - Electrical Equipment of Machines - Part 32: Requirements for Hoisting Machines | GB 5226.2-2002 | 2003-7-1 |
Cranes - Information to be provided - Part 1:General | GB/T 18874.1-2002 | 2003-6-1 |
Cranes-Spare parts manual | GB/T 18875-2002 | 2003-6-1 |
Cranes - Information to be provided - Part 5:Overhead travelling cranes and portal bridge cranes | GB/T 18874.5-2002 | 2003-6-1 |
Specification for hydraulic jacks | JB/T 2104-2002 | 2002-12-1 |
Cranes - Maintenance manual - Part 1:General | GB/T 18453-2001 | 2002-4-1 |
Specification for explosion-proof cranes with eletric wire rope hoist | JB/T 10219-2001 | 2001-10-1 |
Specification for explosion-proof eletric wire rope hoist | JB/T 10222-2001 | 2001-10-1 |
Truck crane and wheel crane — Technical requirements | JB/T 9738-2000 | 2000-10-1 |
Truck crane and wheel crane. Counterbalance valve | JB/T 9739.1-2000 | 2000-10-1 |
Truck crane and wheel crane - Test code of hoist mechanism | JB/T 10170-2000 | 2000-10-1 |
Cranes - Crane driving manual - Part 1: General | GB/T 17909.1-1999 | 2000-6-1 |
Cranes and Lifting Appliances - Technical Characteristics and Acceptance Documents | GB/T 17908-1999 | 2000-6-1 |
Method of reliability test for tower cranes | GB/T 17806-1999 | 2000-2-1 |
Specification for tower crane | GB/T 9462-1999 | 2000-2-1 |
Jib type cranes-Load moment limiters-General technical requirements | GB 7950-1999 | 2000-2-1 |
Test method for the tower crane structures | GB/T 17807-1999 | 2000-2-1 |
Cranes-Test code and procedures | GB 5905-1986 | 2000-1-1 |
Type A - Casting sheaves for cranes | JB/T 9005.4-1999 | 2000-1-1 |
Latch kits of hooks used for hand-operated hoisting appliances | JB/T 4207.2-1999 | 2000-1-1 |
Specification for insulated overhead travelling cranes | JB/T 8907-1999 | 2000-1-1 |
Type A - Casting sheaves for cranes | JB/T 9005.5-1999 | 2000-1-1 |
Casting sheaves for cranes - Type、dimensions of hubs and bearings | JB/T 9005.3-1999 | 2000-1-1 |
Tpye D - Casting sheaves for cranes | JB/T 9005.7-1999 | 2000-1-1 |
Hooks for manually operated lifting equipment | JB/T 4207.1-1999 | 2000-1-1 |
Specification for slab handing cranes | JB/T 7688.14-1999 | 2000-1-1 |
Spring buffer for crane | JB/T 8110.1-1999 | 2000-1-1 |
Casting sheaves for cranes - Technical requirement | JB/T 9005.10-1999 | 2000-1-1 |
Tpye F - Casting sheaves for cranes | JB/T 9005.9-1999 | 2000-1-1 |
Electric Wire Rope Hoists Part2: Testing Method | JB/T 9008.4-1999 | 2000-1-1 |
Casting sheaves for cranes - Selected series and matching of diameters | JB/T 9005.2-1999 | 2000-1-1 |
Specification for rope pulley blocks | JB/T 9007.2-1999 | 2000-1-1 |
Casting sheaves for cranes - Groove profiles | JB/T 9005.1-1999 | 2000-1-1 |
Safety rules for manually operated chain hoists | JB/T 9010-1999 | 2000-1-1 |
Rubber buffer for crane | JB/T 8110.2-1999 | 2000-1-1 |
Tapered rotor motor for electric wire rope hoists | JB/T 9008.3-1999 | 2000-1-1 |
Tpye E - Casting sheaves for cranes | JB/T 9005.8-1999 | 2000-1-1 |
Forged shackles for general lifting purposes -- Dee shackles and bow shackles | JB/T 8112-1999 | 2000-1-1 |
Type C - Casting sheaves for cranes | JB/T 9005.6-1999 | 2000-1-1 |
Short link chain for lifting purposes -- General conditions of acceptance | JB/T 8108.1-1999 | 2000-1-1 |
Rope pulley blocks - Types,parameters and dimensions | JB/T 9007.1-1999 | 2000-1-1 |
Repairing technique rules for the harbour portal crane | GB/T 17496-1998 | 1999-7-1 |
Safety requirement for lifting pulley blocks | GB 13308-1998 | 1999-7-1 |
Specifications for the harbour portal crane | GB/T 17495-1998 | 1999-7-1 |
Tower cranes specification for operation | JG/T 100-1999 | 1999-6-4 |
Crane specifications for water resources construction | SL/T 241-1999 | 1999-3-1 |
Truck crane and wheel crane - Safety code | JB 8716-1998 | 1998-7-1 |
Wireless Remote Control Unit of Hoisting Machinery | JB/T 8437-1996 | 1997-7-1 |
Double Radial Plate Pressed Pulley | JB/T 8398-1996 | 1997-7-1 |
Requirements of Readiness and Methods of Inspection and Assessment for Bridge Cranes | SJ/T 31046-1994 | 1997-1-1 |
Straight Shank Hook Nut | JB/T 7687.3-1995 | 1996-7-1 |
Beams with Straight Shank Lifting Hooks | JB/T 7687.2-1995 | 1996-7-1 |
Position Fixing Plate for Straight Shank Hook Nuts | JB/T 7687.4-1995 | 1996-7-1 |
Beam Blank with Straight Shank Lifting Hook | JB/T 7687.1-1995 | 1996-7-1 |
Safety rules for crawler crane | JG 5055-1994 | 1995-7-1 |
Hydraulic Buffer for Cranes | JB/T 7017-1993 | 1994-7-1 |
Rules for the inspection of truck crane and mobile crane for export | SN/T 0250-1993 | 1994-5-1 |
Design rules for construc tion winches | JG/T 5031-1993 | 1994-3-1 |
General Bridge Cranes | GB/T 14405-1993 | 1994-1-1 |
Specification for cabins of overhead travelling cranes and portal bridge cranes for general purposes | GB/T 14407-1993 | 1994-1-1 |
Rule for inspection of oilostatic jack for export | SN 0029-1992 | 1993-1-1 |
Gantry Cranes for Hydroelectric Power Station | JB/T 6128-1992 | 1993-1-1 |
Electric Gantry Crane - Technical Conditions | JB 5663.2-1991 | 1992-7-1 |
Large Crawler Cranes Technical Conditions | JB/T 5318-1991 | 1992-7-1 |
Specifications of spreader for 5 D freight containers | GB/T 12420-1990 | 1991-5-1 |
Test method for the crawler crane structures | GB 10674-1989 | 1989-11-1 |
Specification for wheel of tower cranes | GB 10672-1989 | 1989-11-1 |
Specification for cab of tower crane | GB 10673-1989 | 1989-10-1 |
Cranes-Overhead travelling cranes and portal bridge cranes-Tolerances for cranes manufacture and tracks laying | GB/T 10183-1988 | 1989-7-1 |
Self-pulling tower crane for power station | GB 10039-1988 | 1989-7-1 |
Lifting hooks--Blanks of shank hook with point | GB/T 10051.4-1988 | 1989-7-1 |
Lifting hooks-Technical conditions of shank hook | GB/T 10051.2-1988 | 1989-7-1 |
Lifting hooks Mechanical properties,lifting capaciti-es,stresses and materials | GB/T 10051.1-1988 | 1989-7-1 |
Test Code and Procedures for Construction Winch | GB 6947-1986 | 1987-9-1 |
Lifting appliances - Vocabulary - Port cranes | GB/T 6974.18-1986 | 1987-7-1 |
Lifting appliances - Vocabulary - Cable cranes | GB/T 6974.14-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Limiting and indicating devices | GB/T 6974.5-1986 | 1987-7-1 |
Lifting appliances - Vocabulary - Stacking cranes | GB/T 6974.17-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Types of lifting appliances | GB/T 6974.1-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Derrick cranes | GB 6974.11-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Parameters | GB/T 6974.2-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Portal slewing cranes | GB/T 6974.10-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Portal bridge cranes | GB 6974.13-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Mechanism and component parts | GB/T 6974.4-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Tower cranes | GB/T 6974.9-1986 | 1987-7-1 |
Lifting appliances - Vocabulary - Container cranes | GB/T 6974.19-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Overhead travelling cranes | GB 6974.12-1986 | 1987-7-1 |
Lifting appliances - Vocabulary - Underslung monorail systems | GB/T 6974.15-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Railway cranes | GB/T 6974.7-1986 | 1987-7-1 |
Lifting appliances; Vocabulary; Metallurgy cranes | GB/T 6974.16-1986 | 1987-7-1 |
Lifting appliances - Vocabulary - Floating cranes | GB/T 6974.8-1986 | 1987-7-1 |
General purpose thimbles for use with steel wire ropes | GB/T 5974.1-1986 | 1986-12-1 |
Cranes - Test Code and Procedures | GB/T 5905-1986 | 1986-11-1 |
Short link chain for lifting purposes--Grade T (8), calibrated, for chain hoists and other lifting appliances | GB 5802-1986 | 1986-10-1 |
Test code for truck crane and mobile crane; Determination of stability | GB/T 6068.3-1985 | 1986-4-1 |
Safety rules for lifting appliances | GB 6067-1985 | 1986-4-1 |
Rubber buffer for crane | GB 6164.2-1985 | 1986-4-1 |
Test code for truck crane and mobile crane-Conformity test | GB/T 6068.2-1985 | 1986-4-1 |
Wire rope for lifting appliances; Code of practice for examination and discard | GB/T 5972-1986 | 1986-1-2 |
Cunneiform connector for use with steel with ropes | GB/T 5973-1986 | 1986-1-2 |
Wire rope grips | GB/T 5976-1986 | 1986-1-2 |
Clamping plates for fixing steel wire ropes | GB/T 5975-1986 | 1986-1-2 |
Rules and methods of performance test for construction tower cranes | GB 5031-1985 | 1985-12-1 |
Short link chain for lifting purposes--General conditions of acceptance | GB 4829-1984 | 1985-10-1 |
Lifting hooks; Nomenclature | GB/T 4307-1984 | 1985-3-1 |
Design Rules for Cranes | GB 3811-1983 | 1984-5-1 |
Truck Crane and Wheel Crane - Technical Requirements | JB/T 2629-1979 | 1980-1-1 |