| Title |
Standard No. |
Implemented On |
| Technical requirements for access network--Interoperability of GPON system | GB/T 37173-2018 | 2019-4-1 |
| Networking specification for broadband customer network based on public telecommunication network--PLC networking | GB/T 33854-2017 | 2017-12-1 |
| Test method for access network equipment—Gigabit-capable passive optical network(GPON) | GB/T 33849-2017 | 2017-12-1 |
| Energy efficiency metrologies and test methods for access equipments-VDSL2 system | GB/T 34088-2017 | 2017-11-1 |
| Technical requirements for access network-Gigabit-capable passive optical network(GPON) | GB/T 33845-2017 | 2017-9-1 |
| Test method for equipments in broadband customer network based on telecommunication network-Part 3:Unified high-speed wire-line based home networking device | YD/T 2019.3-2017 | 2017-7-1 |
| Manufacturing Technical Requirements for Communication Steel Pole Tower | GB/T 29860-2013 | 2014-2-1 |
| Ultrafine coaxial cables with insulation diameter below 1 mm and cable assemblies | GB/T 28509-2012 | 2012-10-1 |
| Intelligent energy saving system by fresh air for telecommunication stations/sites | GB/T 28521-2012 | 2012-10-1 |
| Intelligent heat exchanger for telecommunication stations/sites | GB/T 28520-2012 | 2012-10-1 |
| Radio-frequency coaxial connector Part 4: Type T5.1(C5) | YD/T 943.4-2009 | 2010-1-1 |
| Radio-frequency coaxial connector Part 3: Type T2.8(C3) | YD/T 943.3-2009 | 2010-1-1 |
| Test method for access network equipment Gigabit-capable Passive Optical Network (GPON) | YD/T 1995-2009 | 2010-1-1 |
| Test method of security for access network equipment ——Passive Optical Network (PON) | YD/T 2051-2009 | 2010-1-1 |
| Test method of security for access network equipment —— xDSL CPE | YD/T 2047-2009 | 2010-1-1 |
| Radio-frequency coaxial connector Part 2: Type T3.8(C4) | YD/T 943.2-2009 | 2010-1-1 |
| Radio-frequency coaxial connector Part 1: Type T5.6(L9) | YD/T 943.1-2009 | 2010-1-1 |
| Telecommunication Generic Cabling System for Building Part 1: Generic Specification | YD/T 926.1-2009 | 2009-9-1 |
| Technical Requirements for Access network——ADSL line Transceiver (ATU-C)In-band Management | YD/T 1950-2009 | 2009-9-1 |
| 50Ω Radio-Frequency Coaxial Jumpers for Mobile Communication | YD/T 1966-2009 | 2009-9-1 |
| Technical requirements for access network – Gigabit-capable passive optical network (GPON) Part2: Physical media dependent (PMD) layer requirements | YD/T 1949.2-2009 | 2009-9-1 |
| 50Ω Radio Frequency Coaxial Connectors for Mobile Communication | YD/T 1967-2009 | 2009-9-1 |
| Technical Requirements for Multicast in BGP/MPLS Based Layer3 VPN | YD/T 1946-2009 | 2009-9-1 |
| Technical requirements for access network – Gigabit-capable passive optical network (GPON) Part1: General requirements | YD/T 1949.1-2009 | 2009-9-1 |
| Drop cables for xDSL systems | YD/T 1955-2009 | 2009-9-1 |
| Technical Requirements for Access Network--Multi-service Delivery over EPON/GPON Systems | YD/T 1953-2009 | 2009-9-1 |
| Test Method of BGP/MPLS VPN | YD/T 1945-2009 | 2009-9-1 |
| Technical Requirements for Access Network--DSL Single-Ended Line Testing System | YD/T 1951-2009 | 2009-9-1 |
| Telecommunication Central Office Symmetrical Cables | YD/T 1820-2008 | 2008-11-1 |
| Technical Requirements for Access Network——Point to Point Optical Ethernet Access System | YD/T 1807-2008 | 2008-11-1 |
| Technical Specification for Access Network - ADSL/ADSL2+CPE | YD/T 1188-2008 | 2008-11-1 |
| Plastic Pipe for Buried Communication Conduit Part 1:General | YD/T 841.1-2008 | 2008-7-1 |
| Plastic Pipe for Buried Communication Conduit Part 5:Plum Blossom Pipe | YD/T 841.5-2008 | 2008-7-1 |
| Plastic Pipe for Buried Communication Conduit Part 3:Double-Wall Corrugated Pipe | YD/T 841.3-2008 | 2008-7-1 |
| Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable Part 5:Laminated Metal Plastic foil | YD/T 723.5-2007 | 2008-1-1 |
| Laminated Metal Plastic Strip for Communication Cable and Optical Fibre Cable Part 4:Laminated Copper Plastic Strip | YD/T 723.4-2007 | 2008-1-1 |
| Communication Cable——Foamed Polyethylene Dielectric Smooth Copper-tube or Aluminum-tube Outer Conductor 50 Ohm Radio Frequency Coaxial Cable for Wireless Communication | YD/T 1667-2007 | 2007-12-1 |
| Closure for optical fibre cables Part 4:closure for microduct optical fibre cables | YD/T 814.4-2007 | 2007-10-1 |
| Technical Requirements and Testing Methods for Surge Protective Devices of Signaling Networks | YD/T 1542-2006 | 2007-1-1 |
| Technical Requirements and Testing Methods of Primary Reference Clock Equipment | YD/T 1479-2006 | 2006-10-1 |
| The Test Methods for Routing Protocol Based on IPv6(OSPF) | YD/T 1451-2006 | 2006-10-1 |
| The Technical Requirement for IPv6——Address Transition and Quality of Service | YD/T 1442-2006 | 2006-10-1 |
| Supervision Specification of Telecommunications Conduit and Cable Channel Engineering | YD 5072-2005 | 2006-10-1 |
| Testing Methods for IPv6 Routing Protocol——Border Gateway Protocol(BGP4) | YD/T 1450-2006 | 2006-10-1 |
| Lightning protection—Telecommunication lines—Part 2:Lines using metallic conductors | GB/T 19856.2-2005 | 2006-4-1 |
| Technical requirements of V5 interface Part 1:V5.1 interface | YD/T 1380.1-2005 | 2005-12-1 |
| Technical requirements of V5 interface Part 2 : V5.2 interface | YD/T 1380.2-2005 | 2005-12-1 |
| Residential telecommunications generic cabling system | YD/T 1384-2005 | 2005-12-1 |
| Closure for optical fiber cables Part2:Closure for optical fiber composite overhead ground wires | YD/T 814.2-2005 | 2005-11-1 |
| Closure for optical fiber cables Part3:Closure for shallow water submarine optical fiber cables | YD/T 814.3-2005 | 2005-11-1 |
| Plastic jacket joint closure for telecommunication cable - Part 5: Aeriferous assembly joint closure | YD/T 590.5-2005 | 2005-11-1 |
| Plastic jacket joint closure for telecommunication cable - Part 2: Heat shrinkable joint closure | YD/T 590.2-2005 | 2005-11-1 |
| Plastic jacket joint closure for telecommunication cable - Part 4: Assembly joint closure | YD/T 590.4-2005 | 2005-11-1 |
| Plastic jacket joint closure for telecommunication cable - Part 3: Plastic injection joint closure | YD/T 590.3-2005 | 2005-11-1 |
| Unplasticized polyvinyl chloride(PVC-U)multi-hole pipe for buried telecommunication conduit | YD/T 1324-2004 | 2005-3-1 |
| Insulation Objective to Ground and Testing Method for Optical Cable Link | YD 5012-2003 | 2003-11-1 |
| Multicore and symmetrical pair/quad cables for digital communications Part 2:Horizontal floor wiring | YD/T 838.2-2003 | 2003-7-7 |
| Multicore and symmetrical pair/quad cables for digital communications Part 4:Riser cables | YD/T 838.4-2003 | 2003-7-7 |
| Multicore and symmetrical pair/quad cables for digital communications Part 3:Work area wiring | YD/T 838.3-2003 | 2003-7-7 |
| Multicore and symmetrical pair/quad cables for digital communications Part 1:Generic specification | YD/T 838.1-2003 | 2003-7-7 |
| Plastic jacket joint closure for telecommunication cable Part 1:General specification | YD/T 590.1-2005 | 2002-4-23 |
| Telecommunication Generic Cabling System for Building Part 1:Generic Specification | YD/T 926.1-2001 | 2001-11-1 |
| Test Specification for High-End Router | YD/T 1156-2001 | 2001-11-1 |
| Telecommunication Generic Cabling System for Building Part 3:Connecting Hardware Requirements for Generic Cabling | YD/T 926.3-2001 | 2001-11-1 |
| Telecommunication Generic Cabling System for Building Part 2: Cable Requirements for Generic Cabling | YD/T 926.2-2001 | 2001-11-1 |
| Waterblocking materials for telecommunication cable and optical fiber cable Porel:Waterblocking Tape | YD/T 1115.1-2001 | 2001-7-1 |
| Waterblocking materials for telecommunication cable and optical fiber cable Pore 2:Waterblocking Yarn | YD/T 1115.2-2001 | 2001-7-1 |
| Foamed Polyethylene Dielectric, Corrugated Copper-tube Outer Conductor, 50 ohm Radio Frequency Coaxial Cable for Wireless Communications | YD/T 1092-2000 | 2001-5-1 |
| Filling compounds and flooding compounds for telecommunication cable and optical fiber cable Part1:Test method | YD/T 839.1-2000 | 2001-2-1 |
| Drawings Set for Engineering Design & Working of Generic Cabling System for Building and Campus | YD 5082-1999 | 2000-1-1 |
| Telecommunication generic cabling aystem for building Part3:Connecting hardware requirements for generic cabling | YD/T 926.3-1998 | 1998-10-10 |
| General Commissioning Items and Criteria for SDH Optical Fiber Cable Trunk Line Project | YD XXX 1-1998 | 1998-9-1 |
| Telecommunication Cable Tunnel Atlas | YD 5063-1998 | 1998-9-1 |
| Distrlbuting Donduit Atlas for Telecommunication Cables | YD 5062-1998 | 1998-9-1 |
| Coaxial cable for access network Part 2: Generic requirements for coaxial distribution cable | YD/T 897.2-1998 | 1998-8-1 |
| Telecommunication generic cabling system for building Part 1:Generic Specification | YD/T 926.1-1997 | 1998-1-1 |
| Technical Conditions of Communication Cable Junction Box | YD/T 881-1996 | 1997-4-1 |
| Test method of copper-core, polyolefin insulated, composite aluminum-plastic sheathed cables for urban local communications. Part 3: Test method of mechanical and physical properties | YD/T 837.3-1996 | 1996-9-1 |
| Test Method Of Copper-Core, Polyolefin Insulated, Composite Aluminum-Plastic Sheathed Cables for Urban Local Communications Part 2 Test Method of Electric Performances | YD/T 837.2-1996 | 1996-9-1 |
| Test Method Of Copper-Core, Polyolefin Insulated, Composite Aluminum-Plastic Sheathed Cables for Urban Local Communications Part 1 General Rules | YD/T 837.1-1996 | 1996-9-1 |
| Telephone Subscriber Indoor Copper-Conductor Wires | YD/T 840-1996 | 1996-9-1 |
| Telecommunication Line Air Pressure Monitoring System | YD/T 798-1996 | 1996-7-1 |
| Optical Cable Line Monitor End-Cable | YD/T 815-1996 | 1996-7-1 |
| Insuiation Objective to Ground and Testing Method for Optical Cable Line | YD 5012-1995 | 1995-9-1 |
| Adapter Junction Box for Communication Cables | YD/T 740-1995 | 1995-8-1 |
| YD XXX 3-1995 Telecommunication Cable Subsidiary Conduit Atlas (on Trial) | YD XXX 3-1995 | 1995-7-1 |
| YD XXX 1-1995 Telecommunication Cable Tunnel Atlas (on Trial) | YD XXX 1-1995 | 1995-7-1 |
| Polyolefin Insulated, PVC Sheathed, Parallel-Twin Copper-Clad Steel Wires for Telephone Subscribers Communication | YD/T 722-1994 | 1994-10-1 |
| Standard for design of Telecommunications facilites in civic residential district and office buildings | YD/T 2008-1993 | 1994-1-1 |
| Communication Cable Distribution Box | YD/T 611-1993 | 1993-7-1 |
| PVC insulated, PVC sheathed, LF communication cables and wires Solid- or stranded-conductor, PVC insulated cables and wires for shielding-type equipment | YD/T 531-1992 | 1992-12-1 |
| PVC Insulated, PVC Sheathed, LF Communication Cables and Wires Solid- Or Stranded-Conductor, PVC Insulated Equipment Wires | YD/T 534-1992 | 1992-12-1 |
| PVC insulated, PVC sheathed, LF communication cables and wires Solid-conductor, PVC insulated office wirings | YD/T 535-1992 | 1992-12-1 |
| PVC insulated, PVC sheathed, LF communication cables and wires Signal cables for communication equipment and devices | YD/T 532-1992 | 1992-12-1 |
| Specification for Engineering Design of Urban Local Communication Full-Plastic Cables Lines | YDJ 9-1990 | 1990-11-1 |
| Technical Specifications for Engineering Construction and Acceptance of Urban Local Telephone Lines | YDJ 38-1985 | 1986-12-1 |
| Specification for Engineering Design of Long-Distance Communication Open-Wire Lines | YDJ 6-1984 | 1985-1-1 |
