| Title |
Standard No. |
Implemented On |
| Pulp—Determination of Kappa number | GB/T 1546-2018 | 2019-7-1 |
| Pulp—Determination of alkali solubility | GB/T 5401-2018 | 2019-7-1 |
| Paper and board—Determination of tensile properties—Constant rate of elongation method(20 mm/min) | GB/T 12914-2018 | 2019-7-1 |
| Fibrous raw material,pulp,paper and board—Determination of residue(ash)on ignition at 575 ℃ and 900 ℃ | GB/T 742-2018 | 2019-7-1 |
| Classification requirement of paper and board for recycling | GB/T 20811-2018 | 2019-7-1 |
| Paper,board and pulp—Determination of light scattering and absorption coefficients(Kubelka-Munk method) | GB/T 10339-2018 | 2019-7-1 |
| Paper and board—Determination of bending resistance | GB/T 22364-2018 | 2019-7-1 |
| Paper,board and paper products—Determination of the emissions of volatile organic compounds | GB/T 36985-2018 | 2019-7-1 |
| Tissue paper and products—Safety assessment management system of chemicals and materials | GB/T 36420-2018 | 2019-1-1 |
| Guidelines for screening and elimination of occupational disease hidden risk of Pulp and paper enterprise | DB37/T 3208-2018 | 2018-6-17 |
| Guidelines for classification and control of occupational disease hazards risk on Pulp and paper enterprise | DB37/T 3207-2018 | 2018-6-17 |
| Plasterboard hidden perils in enterprise production safety accident management system implementation guidelines | DB37/T 3169-2018 | 2018-4-29 |
| Implementation Guidelines for the Management and Control System of Risk Classification for Production Safety of Plasterboard Manufacturer | DB37/T 3168-2018 | 2018-4-29 |
| Implementation Guide for the control system of production safety accidents in Paper Making and Paper Products Industry | DB37/T 3150-2018 | 2018-3-24 |
| Implementation guidelines for the management and control system of risk classification for production satety of paper making and paper products industry | DB37/T 3149-2018 | 2018-3-24 |
| Tissue paper―Determination of lead and arsenic released | GB/T 33277-2016 | 2017-7-1 |
| Paper―Determination of softness | GB/T 8942-2016 | 2017-7-1 |
| Specification and size of disposal diapers | GB/T 33280-2016 | 2017-7-1 |
| Paper and board―Determination of compressive strength(Ring crush method) | GB/T 2679.8-2016 | 2017-7-1 |
| Pulps—Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution | GB/T 1548-2016 | 2017-7-1 |
| Specially treated stave of sandfield used for Xuan paper | QB/T 4995-2016 | 2017-1-1 |
| Paper and board―Determination of edge permeance | GB/T 31905-2015 | 2016-4-1 |
| Sheet materials―Determination of water vapour trasmission rate―Gravimetric (Dish) method | GB/T 2679.2-2015 | 2016-4-1 |
| Determination of deinking efficiency for recycled pulp | QB/T 4896-2015 | 2016-3-1 |
| Determination of colour fastness of dyed paper and board intended to come into contact with food | GB/T 31479-2015 | 2015-12-1 |
| Paper and board―Determination of z-directional tensile strength | GB/T 31110-2014 | 2015-8-1 |
| Paper and Board - Qualitative Analysis of Mineral Filler and Mineral Coating - Chemical Method | GB/T 2679.12-2013 | 2014-12-1 |
| Paper―Determination of transmittance―Diffuse reflectance measurement | GB/T 2679.1-2013 | 2014-12-1 |
| Paper and Board - Measurement of Specular Gloss | GB/T 8941-2013 | 2014-12-1 |
| Paper,board and pulps—Measurement of diffuse blue reflectance factor—D65 brightness(Diff/ Geometry,Outdoor daylight conditions) | GB/T 7974-2013 | 2014-5-1 |
| Pulps—Determination of fibre length by automated optical analysis—Unpolarized light method | GB/T 29779-2013 | 2014-5-1 |
| Pulps—Determination of fiber coarseness by automated optical analysis—Image analysis method | GB/T 29775-2013 | 2014-5-1 |
| Paper and board—Determination of dirt | GB/T 1541-2013 | 2014-5-1 |
| Pulps—Laboratory wet disintegration—Disintegration of mechanical pulps | GB/T 29285-2012 | 2013-9-1 |
| Pulps—Determination of water retention value(WRV) | GB/T 29286-2012 | 2013-9-1 |
| Pulps—Determination of fibre length by automated optical analysis—Image analysis method | GB/T 28218-2011 | 2012-9-1 |
| Determination of moisture content in fibrous raw material | GB/T 2677.2-2011 | 2012-9-1 |
| Paper、paper board and paper products for food packaging—Terms | GB/T 28119-2011 | 2012-8-1 |
| paper and board - determination of migratable fluorescent whitening agents | GB/T 27741-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in the raw material preparation system of straw pulp | GB/T 27707-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in deinked pulp(DIP) system | GB/T 27714-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in BCTMP system | GB/T 27705-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in horizontal-tube continuous cooking system | GB/T 27716-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in washing,screening and oxygen delignification system | GB/T 27732-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in batch cooking(vertical digester) system | GB/T 27718-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in four stages bleaching system with chlorine dioxide | GB/T 27709-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in Kamyr continuous cooking system | GB/T 27720-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in the raw material preparation system of wood pulp | GB/T 27722-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in stone ground wood system | GB/T 27721-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in oxygen generation station system | GB/T 27737-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in horizontal gap paper machine system | GB/T 27711-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in alkali recovery combustion system of non-wood pulp | GB/T 27713-2011 | 2012-7-1 |
| Calculation method of energy equilibrium and energy efficiency in multiple effect evaporating system of non-wood pulp | GB/T 27712-2011 | 2012-7-1 |
| General calculation method of the system energy equilibrium in pulp and paper production process | GB/T 27736-2011 | 2012-5-1 |
| Calculation method of energy equilibrium and energy efficiency in fourdrinier paper machine system | GB/T 27724-2011 | 2012-3-1 |
| Calculation method of energy equilibrium and energy efficiency in screening and CEHP bleaching system | GB/T 27727-2011 | 2012-3-1 |
| Pulp,paper and board—Determination of the post color number | GB/T 26459-2011 | 2011-9-15 |
| Pulps—Determination of zero-span tensile strength,wet or dry | GB/T 26460-2011 | 2011-9-15 |
| Determination of brightness (whiteness) for paper inorganic pigments | GB/T 26464-2011 | 2011-9-15 |
| Determination of ply adhesive strength for corrugated fiberboard | GB/T 6548-2011 | 2011-9-15 |
| Paper and board—Determination of internal bond strength(Scott type) | GB/T 26203-2010 | 2011-6-1 |
| Pulp-Highest limitation of brightness | QB/T 4125-2010 | 2011-4-1 |
| Determination of deinking recycled fiber in paper | GB/T 24996-2010 | 2010-12-1 |
| Paper,board and pulps—Determination of lead content—Graphite furnace atomic absorption spectrometry method | GB/T 24991-2010 | 2010-12-1 |
| Paper and board—Highest limitation of brightness | GB/T 24999-2010 | 2010-12-1 |
| Paper,board and pulps—Determination of arsenic | GB/T 24992-2010 | 2010-12-1 |
| Paper,board and pulps—Determination of chromium | GB/T 24990-2010 | 2010-12-1 |
| Paper,board and pulps—Determination of cadmium content—Atomic absorption spectrometric method | GB/T 24997-2010 | 2010-12-1 |
| Measurement of colloidal charge at paper machine wet end | GB/T 24994-2010 | 2010-12-1 |
| Paper,board and pulp - Determination of 7 specified polychlorinated biphenyls(PCBs) | GB/T 25001-2010 | 2010-12-1 |
| Paper,board and pulps—Estimation of uncertainty for test methods | GB/Z 24987-2010 | 2010-12-1 |
| Paper,board and pulp - Determination of pentachlorophenol in an aqueous extract | GB/T 25002-2010 | 2010-12-1 |
| Paper and board—Determination of alkali reserve | GB/T 24998-2010 | 2010-12-1 |
| Measurement of Zeta potential at paper machine wet end | GB/T 24993-2010 | 2010-12-1 |
| Superabsorbent polymer for diaper | QB/T 4036-2010 | 2010-10-1 |
| Pulps Laboratory bearting PFI mill method | QB/T 1463-2010 | 2010-10-1 |
| Bulking paker-Determination of thickness | QB/T 1938-2010 | 2010-10-1 |
| Carton base paper(board) | QB/T 4032-2010 | 2010-10-1 |
| Superabsorbent polymer for sanitary towel | QB/T 4037-2010 | 2010-10-1 |
| Paper and board—Determination of dominant wavelength and excitation purity—D65/10°diffuse reflectance method | GB/T 24288-2009 | 2010-3-1 |
| Paper and board—Measurement of specular gloss—75°gloss with a parallel beam DIN method | GB/T 24289-2009 | 2010-3-1 |
| Measurement of paper machine forming wire and dryer | GB/T 24290-2009 | 2010-3-1 |
| Pulp—Determination of fiber coarseness—Polarized light method | GB/T 24447-2009 | 2010-3-1 |
| Paper and board—Specification for internal diameters of cores for reels | GB/T 24291-2009 | 2010-3-1 |
| Tissue paper and tissue products—Part 7:Determination of ball burst strength | GB/T 24328.7-2009 | 2010-2-1 |
| Pulps—Laboratory sheets—Determination of physical properties | GB/T 24323-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part 6:Water-absorption time and water-absorption capacity(basket-immersion test method) | GB/T 24328.6-2009 | 2010-2-1 |
| Inspection for non-prime paper and paperboard | GB/T 24394-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part 3:Determination of tensile strength stretch at break and tensile energy absorption | GB/T 24328.3-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part 5:Determination of grammage | GB/T 24328.5-2009 | 2010-2-1 |
| Pulps—Preparation of laboratory sheets for physical testing—Conventional sheet-former method | GB/T 24324-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part 1:General principles and terms | GB/T 24328.1-2009 | 2010-2-1 |
| Pulps—Laboratory wet disintegration—Disintegration of chemical pulps | GB/T 24327-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part 4:Determination of wet tensile strength | GB/T 24328.4-2009 | 2010-2-1 |
| Tissue paper and tissue products—Part2:Determination of thickness bulking thickness and apparent bulk density | GB/T 24328.2-2009 | 2010-2-1 |
| Paper and board—Determination of CIE whiteness,D65/10°(outdoor daylight) | GB/T 22880-2008 | 2009-9-1 |
| Pulp,paper and board—Determination of mercury content | GB/T 22804-2008 | 2009-9-1 |
| Paper and board—Determination of curl—Single vertically suspended test piece | GB/T 22896-2008 | 2009-9-1 |
| Paper and board—Determination of grease resistance—Part 2:Surface repellency test | GB/T 22805.2-2008 | 2009-9-1 |
| Testing of cores - Part 9: Determination of flat crush resistance | GB/T 22906.9-2008 | 2009-9-1 |
| Testing of cores—Part 1:Sampling | GB/T 22906.1-2008 | 2009-9-1 |
| Pulp - Determination of fiber length (raster method) | GB/T 23175-2008 | 2009-9-1 |
| Paper and board—Accelerated ageing—Moist heat treatment at 80 ℃ and 65% relative humidity | GB/T 22894-2008 | 2009-9-1 |
| Paper and board - Determination of air permeance(medium range) - General method | GB/T 22901-2008 | 2009-9-1 |
| Solid fibreboard—Determination of grammage of single layers | GB/T 22872-2008 | 2009-9-1 |
| Paper and board—Determination of surface strength(wax method) | GB/T 22837-2008 | 2009-9-1 |
| Testing of cores—Part 5:Determination of characteristics of concentric rotation | GB/T 22906.5-2008 | 2009-9-1 |
| Corrugated fibreboard - Determination of the grammage of the component papers after separation | GB/T 22811-2008 | 2009-9-1 |
| Pulp paper and board - Determination of total chlorine and organically bound chlorine | GB/T 22904-2008 | 2009-9-1 |
| Pulps—Determination of acetone-soluble matter | GB/T 22902-2008 | 2009-9-1 |
| Paper and board—Determination of bending stiffness by static methods—General principle | GB/T 23144-2008 | 2009-9-1 |
| Testing of cores - Part 7: Determination of flexural modulus by the three-point method | GB/T 22906.7-2008 | 2009-9-1 |
| Paper and board—Estimation of contraries | GB/T 22878-2008 | 2009-9-1 |
| Pulps—Standard water for physical testing | GB/T 22903-2008 | 2009-9-1 |
| Paper and board - Determination of grease resistance - Part 1: Permeability test | GB/T 22805.1-2008 | 2009-9-1 |
| Paper and board—Measurement of hygroexpansivity—Part 1:Hygroexpansivity up to a maximum relative humidity of 68% | GB/T 22899.1-2008 | 2009-9-1 |
| Paper and board—Determination of roughness/smoothness(air leak methods)—General method | GB/T 22881-2008 | 2009-9-1 |
| Paper and board—Measurement of hygroexpansivity—Part 2:Hygroexpansivity up to a maximum relative humidity of 86% | GB/T 22899.2-2008 | 2009-9-1 |
| Pulps - Determination of saleable mass in lots - Part 2: Unitized bales | GB/T 8944.2-2008 | 2009-9-1 |
| Pulp—Determination of fiber fibrillation | GB/T 22836-2008 | 2009-9-1 |
| Paper，board and corrugated fiberboard - Description and calibration of compression testing equipment | GB/T 22876-2008 | 2009-9-1 |
| Testing of cores—Part 4:Measurement of dimension | GB/T 22906.4-2008 | 2009-9-1 |
| Single-faced and single-wall corrugated fibreboard—Determination of flat crush resistance | GB/T 22874-2008 | 2009-9-1 |
| Testing of cores—Part 6:Determination of bending strength by three-point method | GB/T 22906.6-2008 | 2009-9-1 |
| Paper and board—Determination of resistance to water penetration | GB/T 22897-2008 | 2009-9-1 |
| Corrugated fibreboard - Determination of the water resistance of the glue bond（immersion） | GB/T 22873-2008 | 2009-9-1 |
| Paper and board—Determination of tensile properties—Constant rate of elongation method (100 mm/min) | GB/T 22898-2008 | 2009-9-1 |
| Paper and board—Determination of water vapour transmission rate of sheet materials—Dynamic sweep and static gas methods | GB/T 22921-2008 | 2009-9-1 |
| Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis | GB/T 22906.8-2008 | 2009-9-1 |
| Paper,board and pulps—Determination of residue(ash)on ignition at 525 ℃ | GB/T 22877-2008 | 2009-9-1 |
| Paper and board—Determination of CIE whiteness,C/2°(indoor illumination conditions) | GB/T 22879-2008 | 2009-9-1 |
| Paper and board—Determination of the static and kinetic coefficients of friction—Horizontal plane method | GB/T 22895-2008 | 2009-9-1 |
| Testing of cores—Part 3:Determination of moisture content using the oven drying method | GB/T 22906.3-2008 | 2009-9-1 |
| High permeable paper - Determination of air permeability | GB/T 22819-2008 | 2009-9-1 |
| Paper and board—Cut-size office paper—Measurement of curl in a pack of sheets | GB/T 22893-2008 | 2009-9-1 |
| Testing of cores—Part 2:Conditioning of test samples | GB/T 22906.2-2008 | 2009-9-1 |
| Paper and board - Determination of tensile strength after immersion in water | GB/T 465.2-2008 | 2009-5-1 |
| Paper and board - Determination of bursting strength after immersion in water | GB/T 465.1-2008 | 2009-5-1 |
| Raw fiber material - Determination of pectin content | GB/T 10742-2008 | 2009-5-1 |
| Paper board and pulp - Determination of acidity or alkalinity | GB/T 1545-2008 | 2009-5-1 |
| Paper and board - Determination of printing surface strength - Accelerating speed method | GB/T 22365-2008 | 2009-5-1 |
| Pulps - Determination of drainability -“Canadian Standard”freeness method | GB/T 12660-2008 | 2009-5-1 |
| Fibrous raw material, pulp, paper and board - Determination of ash | GB/T 742-2008 | 2009-5-1 |
| Paper-determination of the sizing value | GB/T 460-2008 | 2009-5-1 |
| Paper and Board - Determination of Resistance to Bending | GB/T 22364-2008 | 2009-5-1 |
| Paper and board - Determination of filtering rate | GB/T 10340-2008 | 2009-5-1 |
| Paper and board - Determination of tensile properties | GB/T 12914-2008 | 2009-5-1 |
| Raw material and pulp - Determination of acid - soluble lignin | GB/T 10337-2008 | 2009-5-1 |
| Paper board and pulp - Determination of sodium content | GB/T 12658-2008 | 2009-5-1 |
| Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs | GB/T 8944.1-2008 | 2009-5-1 |
| Pulps - Determination of alcohol-benzene solubles | GB/T 10741-2008 | 2009-5-1 |
| Paper and board－Sampling for testing and identification of machine and cross direction wire side and felt side | GB/T 450-2008 | 2009-5-1 |
| Paper and board - Determination of air permeance | GB/T 458-2008 | 2009-5-1 |
| Pulps - Laboratory beating Jokro mill method | GB/T 12659-2008 | 2009-5-1 |
| Pulps - Determination of carboxyl content | GB/T 10338-2008 | 2009-5-1 |
| Paper and board - Determination of microbiological properties - Total bacterial count | GB/T 12661-2008 | 2009-5-1 |
| Paper and board - Determination of folding endurance | GB/T 457-2008 | 2009-5-1 |
| Paper and board - qualitative analysis of mineral filler and mineral coating - SEM/EDAX method | GB/T 2679.11-2008 | 2009-5-1 |
| Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method | GB/T 22363-2008 | 2009-5-1 |
| Paper, board and pulp - Determination of moisture content of analytical sample | GB/T 462-2008 | 2009-5-1 |
| Determination of carbohydrate composition in raw materials and pulps by gas chromatography | GB/T 12033-2008 | 2009-5-1 |
| Waste paper － Estimation of stickies | GB/T 21557-2008 | 2008-10-1 |
| Paper board and pulps—Determination of conductivity of aqueous extracts | GB/T 7977-2007 | 2008-9-1 |
| Paper board and pulp—Determination of manganese | GB/T 8943.3-2008 | 2008-9-1 |
| Paper board and pulp - Determination of copper content | GB/T 8943.1-2008 | 2008-9-1 |
| Testing method of light scattering and absorption coefficient for paper board and pulps | GB/T 10339-2007 | 2008-9-1 |
| Paperboard—Determination of bursting strength | GB/T 1539-2007 | 2008-9-1 |
| Paper board and pulps—Determination of iron | GB/T 8943.2-2008 | 2008-9-1 |
| Paper board pulps and related terms—Vocabulary | GB/T 4687-2007 | 2008-9-1 |
| Paper and board—Determination of color(C/2° diffuse reflectance method) | GB/T 21245-2007 | 2008-9-1 |
| Paper boaed and pulp—Determination of calcium and magnesium | GB/T 8943.4-2008 | 2008-9-1 |
| Paper and board - Determination of fluff on surface | QB/T 2897-2007 | 2008-6-1 |
| Paper and board - Determination of wet pick and wet repellence | QB/T 2896-2007 | 2008-6-1 |
| Waste paper recycled requirements | GB 20811-2006 | 2007-6-1 |
| Paper-online determination of weight and moisture(the near infrared method) | QB/T 2812-2006 | 2007-5-1 |
| Paper and board -- Determination of the rate of surface absorbing | QB/T 2805-2006 | 2006-10-11 |
| Paper and board--Measurement of brightness (45/0) | QB/T 2804-2006 | 2006-10-11 |
| Determination of effective residual ink | GB/T 20216-2006 | 2006-10-1 |
| Paper and board?Preparation of a offset print for test gloss | GB/T 12032-2005 | 2006-4-1 |
| Paper and board—Determination of opacity (paper backing)—Diffuse reflectance method | GB/T 1543-2005 | 2006-4-1 |
| Paper and board-Determination of color(diffuse reflectance method) | GB/T 7975-2005 | 2006-4-1 |
| Board—Determination of puncture resistance | GB/T 2679.7-2005 | 2006-4-1 |
| Paper and board-Determination of water absorption(immersion in water) | GB/T 461.3-2005 | 2006-4-1 |
| Pulps - Determination of acid-insoluble ash | GB/T 7978-2005 | 2006-4-1 |
| Pulps—Determination of stock concentration | GB/T 5399-2004 | 2004-11-1 |
| Pulps—Determination of beating degree(Schopper—Riegler method) | GB/T 3332-2004 | 2004-10-1 |
| Pulps - Determination of alkali solubility | GB/T 5401-2004 | 2004-10-1 |
| Pulps - Determination of viscosity | GB/T 1548-2004 | 2004-10-1 |
| Pulps - Determination of permanganate number | GB/T 1547-2004 | 2004-10-1 |
| Pulps - Determination of Kappa number | GB/T 1546-2004 | 2004-10-1 |
| Raper and board—Determination of air peremeance(medium range)—Gurley method | GB/T 5402-2003 | 2004-6-1 |
| Paper,board and pulp―Determination of pH of aqueous extracts | GB/T 1545.2-2003 | 2004-6-1 |
| Pulps--Determination of fiber length by automated optical analysis--Polarized light method | GB/T 10336-2002 | 2003-4-1 |
| Paper, board and pulps - Units for expressing properties | GB/T 5032-2002 | 2003-4-1 |
| Paper and board - Determination of water absorption - Cobb method | GB/T 1540-2002 | 2003-4-1 |
| Paper--Package and mark | GB/T 10342-2002 | 2003-4-1 |
| - Estimation of dirt and shives | GB/T 10740-2002 | 2003-4-1 |
| Pulps--Preparation of laboratory sheets for the measurement of brightness | GB/T 8940.2-2002 | 2003-4-1 |
| Determination of fibre constituent for paper and board | GB/T 4688-2002 | 2003-4-1 |
| Paper and board--Determination of air permeance (Schopper method） | GB/T 458-2002 | 2003-1-1 |
| Testing method of oil permeance for paper | GB/T 5406-2002 | 2003-1-1 |
| Paper board and pulps--Measurement of diffuse reflectance factor (Diff/o-Geometry) | GB/T 7973-1987 | 2003-1-1 |
| Paper,board and pulps--STANDARD atmosphere for conditioning and testing | GB/T 10739-2002 | 2003-1-1 |
| Paper--Determination of folding endurance (Schopper method) | GB/T 457-2002 | 2003-1-1 |
| Determination of fiber coarseness | GB/T 18829.6-2002 | 2003-1-1 |
| Paper and board-Determinatoin of capillary rise(Klemm method) | GB/T 461.1-2002 | 2003-1-1 |
| Paper and board--Determination of the rate of surface absorbing | GB/T 461.2-2002 | 2003-1-1 |
| Paper--Determination of the sizing value (Liquid permeance method) | GB/T 5405-2002 | 2003-1-1 |
| Paper-Determination of softness | GB/T 8942-2002 | 2003-1-1 |
| Paper and board--Determination of demensional instability | GB/T 459-2002 | 2003-1-1 |
| Paper-Determination of the sizing value(Ink line method) | GB/T 460-2002 | 2003-1-1 |
| Rules for the inspection of transport packaging for export commodities--Corrugated board for box | SN/T 1025-2001 | 2002-6-1 |
| Pulps--Determination of drainability (dainage time method) | GB/T 18402-2001 | 2002-2-1 |
| Pulps-Labaratory sheets--Determination of physical properties | QB/T 3704-1999 | 1999-4-21 |
| Raw material for making paper--Sugarcane bagasse | QB/T 3701-1999 | 1999-4-21 |
| Pulps--Laboratory beating--Valley beater method | QB/T 3702-1999 | 1999-4-21 |
| Pulps--Preparation of laboratory sheets conventional sheet-former method | QB/T 3703-1999 | 1999-4-21 |
| Paper and board--Determination of printing surface strength--Accelerating speed method (pendulum or spring model) | GB/T 2679.16-1997 | 1997-12-1 |
| paper and certain classes printed matter - Trimmed sizes - A and B series | GB/T 148-1997 | 1997-12-1 |
| paper and certain classes printed matter - Untrimmed sizes | GB/T 147-1997 | 1997-12-1 |
| Paper and board-Determination of printing surface strength-Accelerating speed method (electric model) | GB/T 2679.15-1997 | 1997-12-1 |
| Corrugated fibreboard--Determination of edgewise crush resistance(Edge reinforced method) | GB/T 2679.17-1997 | 1997-12-1 |
| Paper,board and pulp-Determination of water soluble chlorides (AgNO3, method) | GB/T 2678.5-1996 | 1997-1-1 |
| Paper and board-Determination of air permeance (medium range)-Bendtsen method | GB/T 2679.13-1996 | 1996-12-1 |
| Paper and board-Ｄetermination of resistance bending | GB/T 2679.3-1996 | 1996-12-1 |
| Corrugating medium-Determination of the flat crush resistance after laboratory fluting | GB/T 2679.6-1996 | 1996-12-1 |
| Paper and board－Determination of folding endurance (MIT tester) | GB/T 2679.5-1995 | 1996-4-1 |
| Fibrous raw material-Determination of holocellulose | GB/T 2677.10-1995 | 1996-4-1 |
| Pulp－Determination of chlorine consumption (Degree of delignification) | GB/T 2678.3-1995 | 1996-4-1 |
| Paper and board-Determination of water vapour transmission rate (Dish method) | GB/T 2679.2-1995 | 1996-4-1 |
| Paper and board－Determination of compressive strength－Ring crush method | GB/T 2679.8-1995 | 1996-4-1 |
| Durability test method of document paper | DA/T 11-1994 | 1995-10-1 |
| Fibrous raw material—Determination of acid-insoluble lignin | GB/T 2677.8-1994 | 1995-3-1 |
| Fibrous raw material—Determination of solvent extractives | GB/T 2677.6-1994 | 1995-3-1 |
| paper and board-Compressive strength-Short span test | GB/T 2679.10-1993 | 1994-3-1 |
| Pulps—Determination of screened components | GB/T 2678.1-1993 | 1994-3-1 |
| Fibrous raw material—Determination of water solubility | GB/T 2677.4-1993 | 1993-10-1 |
| Fibrous raw material of sampling for analysis | GB/T 2677.1-1993 | 1993-10-1 |
| Fibrous raw material—Determination of one percent sodium hydroxide solubility | GB/T 2677.5-1993 | 1993-10-1 |
| Paper and board-Determination of titanium dioxide | GB/T 12910-1991 | 1992-3-1 |
| Paper,board and pulp-Determination of potassium and sodium content | GB/T 12658-1990 | 1991-10-1 |
| Determination of carbohydrate composition in raw materials and puips by gas chromatography | GB/T 12032-1989 | 1990-10-1 |
| Paper and board--Determination of water absorption--Cobb method | GB/T 1540-1989 | 1989-12-1 |
| Paper and board - Determination of dirt | GB/T 1541-1989 | 1989-12-1 |
| Paper and board--Determination of tensile properties--Constant rate of loading method | GB/T 453-1989 | 1989-12-1 |
| Paper and board; Determination of tensile strength after immersion in water | GB/T 465.2-1989 | 1989-12-1 |
| Paper board and pulps--Conditioning of samples and testing atmospheres | GB/T 10739-1989 | 1989-12-1 |
| Paper and board--Determination of air permeance(Schopper method) | GB/T 458-1989 | 1989-12-1 |
| Paper and board--Determination of ash | GB/T 463-1989 | 1989-12-1 |
| Paper and board--Determination of smoothness(Bekk method) | GB/T 456-1989 | 1989-12-1 |
| Paper and board--Determination of the sizing value(ink line) | GB/T 460-1989 | 1989-12-1 |
| Paper and board--Determination of size and deviation | GB/T 451.1-1989 | 1989-9-1 |
| Paper and board--Determination of basic weight | GB/T 451.2-1989 | 1989-9-1 |
| Method of determination of fiber length for papermaking | GB/T 10336-1989 | 1989-9-1 |
| Paper and board--Determination of thickness | GB/T 451.3-1989 | 1989-9-1 |
| Paper board and pulp―Determination of PH of aqueous extracts | GB/T 1545.2-1989 | 1989-9-1 |
| Paper and board--Identification of machine and cross direction | GB/T 452.1-1989 | 1989-9-1 |
| Raw material and pulp - Determination of acid-soluble lignin | GB 10337-1989 | 1989-9-1 |
| Paper and board - Determination of filtering rate | GB 10340-1989 | 1989-9-1 |
| Testing method of light scattering and absorptlon coefficlent for paper and pulps | GB 10339-1989 | 1989-9-1 |
| Raw fiber material; Determination of pectin content | GB 10742-1989 | 1989-1-2 |
| Paper and board; Determination of absorption after immersion in water | GB/T 461.3-1989 | 1989-1-2 |
| Paper and board; Determination of bursting strength after immersion in water | GB/T 465.1-1989 | 1989-1-2 |
| Paper and board - Measurement of brightness (45/0) | GB/T 8940.1-1988 | 1988-8-1 |
| Paper - Determination of opacity (paper backing) | GB/T 1543-1988 | 1988-8-1 |
| Paper,board and pulp - Determination of iron content | GB 8943.2-1988 | 1988-8-1 |
| Pulp paper and board - Determination of manganese | GB 8943.3-1988 | 1988-8-1 |
| Pulp,paper and board - Determination of calcium and magnesium | GB 8943.4-1988 | 1988-8-1 |
| Pulps-Determination of dichloromethane soluble matter | GB/T 7979-1987 | 1988-7-1 |
| Paper, board and pulps - Measurement of diffuse reflectance factor(Diff/Geometry) | GB/T 7973-2003 | 1988-5-1 |
| Pulps - Determination of dichloromethane soluble matter | GB/T 7979-2005 | 1987-12-1 |
| Paper board and pulps-Determination of the electrical conductivity for the water extract | GB 7977-1987 | 1987-12-1 |
| Testing method of oil permeance for paper | GB/T 5406-1985 | 1986-5-1 |
| Paper board and pulps--Units for expressing properties | GB/T 5032-1985 | 1986-1-1 |
| Paper,board,pulp terms(1) | GB 4687-1984 | 1985-7-1 |
| Determination of fiber constituent for paper and board | GB/T 4688-1984 | 1985-7-1 |
| Paper board-Determination of piercing strength | GB/T 2679.7-1981 | 1981-8-1 |
| Pulps—Laboratory beating—Valley beater method | GB/T 24325-2009 | 1900-7-19 |
