Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
FZ/T 62011 Indoor Ornamental Textiles is divided into four parts:
——Part 1: Curtain;
——Part 2: Dinner Table Textiles;
——Part 3: Upholstery;
——Part 4: Interior Decoratives.
This part is Part 4 of FZ/T 62011.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This part replaces FZ/T 62011.4-2008 Indoor Ornamental Textiles - Part 4: Textile Thing.
The following main changes have been made with respect to FZ/T 62011.4-2008 (the previous edition):
——English name of the standard is modified (see cover; cover in Edition 2008);
——Test method for Color fastness to soaping is modified (see Chapter 2; Chapter 2 in edition 2008);
——"Marking, packaging, transportation and storage" are added and improved (see Chapter 8; Chapter 8 in Edition 2008).
This part was proposed by the China National Textile and Apparel Council.
This part is under the jurisdiction of National Technical Committee 302 on Household Textiles of Standardization Administration of China (SAC/TC 302).
Previous edition of this standard is as follows:
- FZ/T 62011.4-2008.
Indoor Ornamental Textiles - Part 4: Interior Decoratives
1 Scope
This part of FZ/T 62011 specifies the terms and definitions, requirements, sampling, test methods, inspection rules, and marking, packaging, transportation and storage of indoor textiles (indoor ornamental textiles).
This standard is applicable to interior decoratives made of textile fiber.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3920 Textiles – Tests for Colour Fastness – Colour fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5711 Textiles - Tests for Colour Fastness - Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 8427-2008 Textiles - Tests for Color Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
FZ/T 20009 Determination of the Dimensional Changes of Wool Fabrics - Water Immersion
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
indoor ornamental textile
Textile products mainly made of textile material, used for indoors with indoor decoration and/or utility function and mainly divided into curtain, dinner table textiles, upholstery and interior decoratives.
3.2
interior decoratives
Textiles which are mainly intended for indoor decoration, e.g. bed, wall and floor decoratives (except carpet) as well as various bags, wrappages, aprons, clamps and ornaments etc..
4 Requirements
4.1 The quality of interior decoratives is classified into high-grade product, first-grade product and qualified product.
4.2 The quality index of interior decoratives includes the dimensional stability to water soaking and color fastness (to soaping, dry cleaning, rubbing and light). See Table 1 for the index content.
1 Dimensional stability to water soakinga/% -5.0~+5.0
2 Color fastness/grade
≥ Soaping fastness b Discoloring 4 3-4 3
Staining 4 3-4 3
Dry cleaning fastness Discoloring 4 3-4 3
Staining in liquid 4 3-4 3
Rubbing fastness Dry rubbing 4 3-4 3
Wet rubbing 3-4 3 2-3
Light fastness 4 3 3
a The dimensional stability to water soaking and color fastness to soaping are applicable to washable products, but dimensional stability won't be assessed for the product with dimension less than 20cm×20cm.
b Color fastness to dry cleaning is applicable to dry-cleaning product.
4.3 Special requirements are in accordance with those stipulated in contract/agreement between the Parties.
5 Sampling
5.1 See Table 2 for the sampling quantity and scheme of quality inspection.
Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Sampling 6 Inspection Methods 7 Inspection Rules 8 Marking, Packaging, Transportation and Storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
FZ/T 62011 Indoor Ornamental Textiles is divided into four parts:
——Part 1: Curtain;
——Part 2: Dinner Table Textiles;
——Part 3: Upholstery;
——Part 4: Interior Decoratives.
This part is Part 4 of FZ/T 62011.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This part replaces FZ/T 62011.4-2008 Indoor Ornamental Textiles - Part 4: Textile Thing.
The following main changes have been made with respect to FZ/T 62011.4-2008 (the previous edition):
——English name of the standard is modified (see cover; cover in Edition 2008);
——Test method for Color fastness to soaping is modified (see Chapter 2; Chapter 2 in edition 2008);
——"Marking, packaging, transportation and storage" are added and improved (see Chapter 8; Chapter 8 in Edition 2008).
This part was proposed by the China National Textile and Apparel Council.
This part is under the jurisdiction of National Technical Committee 302 on Household Textiles of Standardization Administration of China (SAC/TC 302).
Previous edition of this standard is as follows:
- FZ/T 62011.4-2008.
Indoor Ornamental Textiles - Part 4: Interior Decoratives
1 Scope
This part of FZ/T 62011 specifies the terms and definitions, requirements, sampling, test methods, inspection rules, and marking, packaging, transportation and storage of indoor textiles (indoor ornamental textiles).
This standard is applicable to interior decoratives made of textile fiber.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3920 Textiles – Tests for Colour Fastness – Colour fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5711 Textiles - Tests for Colour Fastness - Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 8427-2008 Textiles - Tests for Color Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
FZ/T 20009 Determination of the Dimensional Changes of Wool Fabrics - Water Immersion
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
indoor ornamental textile
Textile products mainly made of textile material, used for indoors with indoor decoration and/or utility function and mainly divided into curtain, dinner table textiles, upholstery and interior decoratives.
3.2
interior decoratives
Textiles which are mainly intended for indoor decoration, e.g. bed, wall and floor decoratives (except carpet) as well as various bags, wrappages, aprons, clamps and ornaments etc..
4 Requirements
4.1 The quality of interior decoratives is classified into high-grade product, first-grade product and qualified product.
4.2 The quality index of interior decoratives includes the dimensional stability to water soaking and color fastness (to soaping, dry cleaning, rubbing and light). See Table 1 for the index content.
Table 1 Quality Requirements
S.N. Assessment item High-grade product First-grade product Qualified product
1 Dimensional stability to water soakinga/% -5.0~+5.0
2 Color fastness/grade
≥ Soaping fastness b Discoloring 4 3-4 3
Staining 4 3-4 3
Dry cleaning fastness Discoloring 4 3-4 3
Staining in liquid 4 3-4 3
Rubbing fastness Dry rubbing 4 3-4 3
Wet rubbing 3-4 3 2-3
Light fastness 4 3 3
a The dimensional stability to water soaking and color fastness to soaping are applicable to washable products, but dimensional stability won't be assessed for the product with dimension less than 20cm×20cm.
b Color fastness to dry cleaning is applicable to dry-cleaning product.
4.3 Special requirements are in accordance with those stipulated in contract/agreement between the Parties.
5 Sampling
5.1 See Table 2 for the sampling quantity and scheme of quality inspection.
Contents of FZ/T 62011.4-2016
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Sampling
6 Inspection Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
