1 Scope
This Standard specifies the requirements such as definition, classification and model, performance requirements, test methods, test rules, marking and packaging, storage, transportation and operation instructions, etc. of auto tracking and targeting jet suppression system (hereinafter referred to as the “System”)
This Standard is applicable to various auto tracking and targeting jet suppression systems that take water or foam mixture as spray medium, utilize infrared ray, digital image or other fire detection assembly to perform auto targeting of fire at early stage and realize fire suppression via automatic control technology.
2 Normative References
The following referenced documents are indispensable for the application of this Standard. For dated reference, subsequent amendments to (excluding correction contents), or revisions of, any of these publications do not apply. However, it is encouraged that the Parties that reach an agreement according to this Standard should research whether the latest edition of these documents can be used. For any undated references, the latest editions of the documents referred to apply.
GB/T 2423.1-2008 Environmental Testing - Part 2: Test Methods - Tests A: Cold (TEC 60068-2-1：2007, IDT)
GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test B: Dry Heat(IEC 60068-2-2：2007, IDT)
GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products - Part 2: Testing Methods - Test Cab: Damp Heat Steady State(IEC 60068-2-78：2001, IDT)
GB/T 2423.10-2008 Environmental Testing for Electric and Electronic Products－Part 2: Test Methods -Test Fc: Vibration (Sinusoidal)(IEC 60068-2-6：1995, IDT)
GB 4351.1-2005 Portable Fire Extinguishers - Part 1: Performance and Construction (ISO 7165：1999, NEQ)
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Model
5 Performance Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Storage, Transportation and Operation Instruction
Appendix A (Normative) Test Procedure for Auto Tracking and Targeting Jet Suppression System
1 Scope
This Standard specifies the requirements such as definition, classification and model, performance requirements, test methods, test rules, marking and packaging, storage, transportation and operation instructions, etc. of auto tracking and targeting jet suppression system (hereinafter referred to as the “System”)
This Standard is applicable to various auto tracking and targeting jet suppression systems that take water or foam mixture as spray medium, utilize infrared ray, digital image or other fire detection assembly to perform auto targeting of fire at early stage and realize fire suppression via automatic control technology.
2 Normative References
The following referenced documents are indispensable for the application of this Standard. For dated reference, subsequent amendments to (excluding correction contents), or revisions of, any of these publications do not apply. However, it is encouraged that the Parties that reach an agreement according to this Standard should research whether the latest edition of these documents can be used. For any undated references, the latest editions of the documents referred to apply.
GB/T 2423.1-2008 Environmental Testing - Part 2: Test Methods - Tests A: Cold (TEC 60068-2-1：2007, IDT)
GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test B: Dry Heat(IEC 60068-2-2：2007, IDT)
GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products - Part 2: Testing Methods - Test Cab: Damp Heat Steady State(IEC 60068-2-78：2001, IDT)
GB/T 2423.10-2008 Environmental Testing for Electric and Electronic Products－Part 2: Test Methods -Test Fc: Vibration (Sinusoidal)(IEC 60068-2-6：1995, IDT)
GB 4351.1-2005 Portable Fire Extinguishers - Part 1: Performance and Construction (ISO 7165：1999, NEQ)
3 Terms and Definitions
Contents of GB 25204-2010
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Model
5 Performance Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Storage, Transportation and Operation Instruction
Appendix A (Normative) Test Procedure for Auto Tracking and Targeting Jet Suppression System
