1. Scope
This standard specifies the values of efficiency grade, minimum allowable values of energy efficiency, target minimum allowable values of energy efficiency, evaluating values of energy conservation and the test methods for small-power asynchronous motors (hereinafter referred to as "motor").
This standard is applicable to general purpose motors of voltage up to and including 690V and powered by 50Hz AC power source, e.g. small power three-phase asynchronous motor (10W~2200W), capacitor-run asynchronous motor (10W~2200W), capacitor-start asynchronous motors (120W~3700W), two-value capacitor asynchronous motor (250W~3000W), and to the fan motors (6W~550W) of room air conditioner.
2. Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 1032 Test Procedure for Three-phase Induction Motors
GB/T 5171 General Technical Requirements for Small Power Motors
GB/T 9651-2008 Test Procedure for Single-phase Induction Motor
GB 12350 Safety Requirements of Small-power Motors
3. Terms and Definitions
Foreword
1. Scope
2. Normative References
3. Terms and Definitions
4. Technical Requirements
5. Test Methods
1. Scope
This standard specifies the values of efficiency grade, minimum allowable values of energy efficiency, target minimum allowable values of energy efficiency, evaluating values of energy conservation and the test methods for small-power asynchronous motors (hereinafter referred to as "motor").
This standard is applicable to general purpose motors of voltage up to and including 690V and powered by 50Hz AC power source, e.g. small power three-phase asynchronous motor (10W~2200W), capacitor-run asynchronous motor (10W~2200W), capacitor-start asynchronous motors (120W~3700W), two-value capacitor asynchronous motor (250W~3000W), and to the fan motors (6W~550W) of room air conditioner.
2. Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 1032 Test Procedure for Three-phase Induction Motors
GB/T 5171 General Technical Requirements for Small Power Motors
GB/T 9651-2008 Test Procedure for Single-phase Induction Motor
GB 12350 Safety Requirements of Small-power Motors
3. Terms and Definitions
Contents of GB 25958-2010
Foreword
1. Scope
2. Normative References
3. Terms and Definitions
4. Technical Requirements
5. Test Methods
