1 Application Scope
This standard specifies the emission limits, monitoring and supervising requirements for air pollutants in steelmaking industry or production facilities and the requirements for implementation and supervision of the standards.
This standard is applicable to air pollutant emission management for steelmaking industry or production facilities, as well as the environmental impact assessment for the construction projects in steelmaking industry, environment protection facility design, completion environmental protection acceptance and air pollutant emission management after being put into operation.
This standard is only applicable to legal pollutants emission; the site selection of new pollution sources and the management of existing pollution source within special protected zone are in accordance with "Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution", "Law of the People's Republic of China on Prevention and Control of Water Pollution", "Law of the People's Republic of China on Marine Environment Protection", Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste, "Law of the People's Republic of China on Prevention and Control of Radioactive Pollution", "Law of the People's Republic of China on Environmental Impact Assessment".
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard.
GB/T 15432-1995 Ambient Air - Determination of Total Suspended Particulates - Gravimetric Method
GB/T 16157-1996 Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
HJ/T 67-2001 Stationary Source Emission -- Determination of Fluoride -- Ion Selective Electrode Method
HJ/T 77.2-2008 Ambient Air and Waste Gas Determination of Polychlorinated Dibenzo-p-dioxins(PCDDs)and Polychlorinated Dibenzofurans(PCDFs)
HJ/T 397-2007 Technical Specifications for Emission Monitoring of Stationary Source
Management Method on Automatic Supervisory Control of Pollution Source Decree 28 of the State Environmental Protection Administration
Environmental Monitoring Management Method Decree 39 of the State Environmental Protection Administration
3 Terms and Definitions
Foreword I
1 Application Scope
2 Normative References
3 Terms and Definitions
4 Air Pollutant Emission Control Requirements
5 Requirements of Air Pollutants Monitoring
6 Implementation and Supervision
1 Application Scope
This standard specifies the emission limits, monitoring and supervising requirements for air pollutants in steelmaking industry or production facilities and the requirements for implementation and supervision of the standards.
This standard is applicable to air pollutant emission management for steelmaking industry or production facilities, as well as the environmental impact assessment for the construction projects in steelmaking industry, environment protection facility design, completion environmental protection acceptance and air pollutant emission management after being put into operation.
This standard is only applicable to legal pollutants emission; the site selection of new pollution sources and the management of existing pollution source within special protected zone are in accordance with "Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution", "Law of the People's Republic of China on Prevention and Control of Water Pollution", "Law of the People's Republic of China on Marine Environment Protection", Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste, "Law of the People's Republic of China on Prevention and Control of Radioactive Pollution", "Law of the People's Republic of China on Environmental Impact Assessment".
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard.
GB/T 15432-1995 Ambient Air - Determination of Total Suspended Particulates - Gravimetric Method
GB/T 16157-1996 Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
HJ/T 67-2001 Stationary Source Emission -- Determination of Fluoride -- Ion Selective Electrode Method
HJ/T 77.2-2008 Ambient Air and Waste Gas Determination of Polychlorinated Dibenzo-p-dioxins(PCDDs)and Polychlorinated Dibenzofurans(PCDFs)
HJ/T 397-2007 Technical Specifications for Emission Monitoring of Stationary Source
Management Method on Automatic Supervisory Control of Pollution Source Decree 28 of the State Environmental Protection Administration
Environmental Monitoring Management Method Decree 39 of the State Environmental Protection Administration
3 Terms and Definitions
Contents of GB 28664-2012
Foreword I
1 Application Scope
2 Normative References
3 Terms and Definitions
4 Air Pollutant Emission Control Requirements
5 Requirements of Air Pollutants Monitoring
6 Implementation and Supervision