This document specifies the safety requirements of the light source, including general requirements, marking, electrical safety, temperature-related requirements, mechanical safety, abnormal state, fault state and end-of-life safety, moisture resistance and dust prevention, photobiological safety requirements and other technical requirements directly related to the protection of personal health and life & property safety, and it also describes the corresponding verification methods.
It is applicable to light source products.
Note: In this document, the "light source" specially refers to the "electric light source", lamps, LED modules, OLED panels and other products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/Z 34447 Sharp edge testing apparatus and test procedure for lighting equipment -Tests for sharpness of edge
GB/T 39075.1 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 1: General requirements and tests
GB/T 39075.201 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-1: Particular requirements - Semi-integrated OLED modules
GB/T 39075.202 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules
GB/T 39075.203 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels
GB/T 43626 LEDsi lamps for general lighting services with supply voltages not exceeding 50V a.c. r.m.s. or 120V ripple free d.c. - Safety specifications
GB/T 43627 Double-capped LED lamps designed to retrofit liner fluorescent lamps - Safety specifications
GB/T 43081 Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.65, GB/T 24826 and GB/T 7000.1 as well as the following apply.
3.1
light sources for general lighting purposes
light sources mainly serving the people or other creatures with visual perception, and applied in general lighting, local lighting, regional lighting, emergency lighting and other occasions
Note: The light sources for general lighting purposes may also produce non-visual effects.
3.2
light sources for special lighting purposes
light sources designed and manufactured with lighting or signal indication functions in specific application fields
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Requirements 6 Verification methods Annex A (Normative) Compliance verification standards
Light sources - Safety requirements
1 Scope
This document specifies the safety requirements of the light source, including general requirements, marking, electrical safety, temperature-related requirements, mechanical safety, abnormal state, fault state and end-of-life safety, moisture resistance and dust prevention, photobiological safety requirements and other technical requirements directly related to the protection of personal health and life & property safety, and it also describes the corresponding verification methods.
It is applicable to light source products.
Note: In this document, the "light source" specially refers to the "electric light source", lamps, LED modules, OLED panels and other products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2900.65 Electrotechnical terminology - Lighting
GB/T 7000.1 Luminaries - Part 1: General requirements and tests
GB/T 14196.1 Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
GB/T 14196.2 Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
GB/T 14196.3 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
GB/T 16843 Single-capped fluorescent lamps - Safety specifications
GB/T 16844 Self-ballasted fluorescent lamps for general lighting service - Safety specifications
GB/T 18774 Double-capped fluorescent lamps - Safety specifications
GB/T 19258
(all parts) Ultraviolet radiation sources for germicidal purpose
GB/T 19652 Discharge lamps (excluding fluorescent lamps) - Safety specifications
GB 21554 Self-ballasted electrodeless fluorescent lamps for general lighting services - Safety requirements
GB/T 23140 Infrared lamps
GB/T 24819 LED modules for general lighting - Safety specifications
GB/T 24826 General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
GB/T 24906 Self-ballasted LED-lamps for general lighting services by voltage >50V - Safety specifications
GB/T 30422 Fluorescent induction lamps (excluding self-ballasted lamps) - Safety specifications
GB/Z 34447 Sharp edge testing apparatus and test procedure for lighting equipment -Tests for sharpness of edge
GB/T 39075.1 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 1: General requirements and tests
GB/T 39075.201 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-1: Particular requirements - Semi-integrated OLED modules
GB/T 39075.202 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules
GB/T 39075.203 Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels
GB/T 43626 LEDsi lamps for general lighting services with supply voltages not exceeding 50V a.c. r.m.s. or 120V ripple free d.c. - Safety specifications
GB/T 43627 Double-capped LED lamps designed to retrofit liner fluorescent lamps - Safety specifications
GB/T 43081 Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.65, GB/T 24826 and GB/T 7000.1 as well as the following apply.
3.1
light sources for general lighting purposes
light sources mainly serving the people or other creatures with visual perception, and applied in general lighting, local lighting, regional lighting, emergency lighting and other occasions
Note: The light sources for general lighting purposes may also produce non-visual effects.
3.2
light sources for special lighting purposes
light sources designed and manufactured with lighting or signal indication functions in specific application fields
Contents of GB 43471-2023
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Verification methods
Annex A (Normative) Compliance verification standards
