This standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.
Foreword I
ISO Foreword II
EN Foreword III
1 Scope
2 Normative References
3 Terms and Definitions
4 Test Apparatus
5 Test Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
Annex A (Normative) Smoke Measurement
Annex B (Informative) Precision of Test Method
Annex C (Informative) Gas and Air Supplies
This standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames.
This method is applicable to all types of flooring e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in Annex B.
Contents of GB/T 11785-2005
Foreword I
ISO Foreword II
EN Foreword III
1 Scope
2 Normative References
3 Terms and Definitions
4 Test Apparatus
5 Test Specimen
6 Conditioning
7 Test Procedure
8 Expression of Results
9 Test Report
Annex A (Normative) Smoke Measurement
Annex B (Informative) Precision of Test Method
Annex C (Informative) Gas and Air Supplies