1 Scope
This standard specifies terms and definitions, types, sizes and designation, raw material structural parts, requirements, test methods, inspection rules, marking, packaging, transportation and storage of bathroom unit made from mould pressing of glass-fiber reinforced plastics.
This standard is applicable to series products of bathroom unit with function combination of shower, tub bath, toiletries and lavatories for civil, public and industrial building use. Other bathroom unit may also make reference to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3854 Test method for hardness of reinforced plastics by means of Barcol impresser
GB 4706.1 Household and similar electrical appliances — Safety — Part 1: General requirements
GB/T 6952 Sanitary wares
GB/T 11942 Colorimetric methods for colour building materials
GB/T 18102-2000 Laminate floor covering
GB/T 18103-2000 Parquet
JC/T 644 Artificial agate and artificial marble sanitary wares
JC 707 Fittings for water closet flush tank
JC/T 758 Washbasin faucets
JC/T 760 Bathtub and shower faucets
JC/T 761 Sanitary ware — General specification for copper drainage fittings
JC/T 762 Sanitary ware — Copper drainage fittings — Structure type and connecting dimensions
JC/T 764 WC seats
JC/T 779 Glass fiber reinforced plastics baths
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
1 Scope
This standard specifies terms and definitions, types, sizes and designation, raw material structural parts, requirements, test methods, inspection rules, marking, packaging, transportation and storage of bathroom unit made from mould pressing of glass-fiber reinforced plastics.
This standard is applicable to series products of bathroom unit with function combination of shower, tub bath, toiletries and lavatories for civil, public and industrial building use. Other bathroom unit may also make reference to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3854 Test method for hardness of reinforced plastics by means of Barcol impresser
GB 4706.1 Household and similar electrical appliances — Safety — Part 1: General requirements
GB/T 6952 Sanitary wares
GB/T 11942 Colorimetric methods for colour building materials
GB/T 18102-2000 Laminate floor covering
GB/T 18103-2000 Parquet
JC/T 644 Artificial agate and artificial marble sanitary wares
JC 707 Fittings for water closet flush tank
JC/T 758 Washbasin faucets
JC/T 760 Bathtub and shower faucets
JC/T 761 Sanitary ware — General specification for copper drainage fittings
JC/T 762 Sanitary ware — Copper drainage fittings — Structure type and connecting dimensions
JC/T 764 WC seats
JC/T 779 Glass fiber reinforced plastics baths
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
