1 Scope
This standard specifies the requirements, test, inspection rules, marking, packing, transportation and storage requirements of natural gas generating set (hereinafter referred to as "set") for the petroleum industry.
This standard is applicable to the generating set composed of 3~3150kW reciprocating internal combustion engine with rated frequency of 50Hz and natural gas as fuel, AC generator, control device and auxiliary equipment.
The generating set with other combustible gas as fuel or set with frequency of 60Hz may implement by reference.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 146.1 Rolling Stock Gauge for Standard Gauge Railways
GB 146.2 Structure Gauge for Standard Gauge Railways
GB/T 191 Packaging - Pictorial Marking for Handling of Goods(GB/T 191-2008, ISO 780:1997, MOD)
GB/T 2820.3 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 3: Alternating Current Generators for Generating Gets(GB/T 2820.3-1997, eqv ISO 8528-3:1993)
GB/T 2820.4 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 4: Controlgear and Switchgear(GB/T 2820.4-1997, eqv ISO 8528-4:1993)
GB/T 2820.5-1997 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 5: Generating Sets (eqv ISO 8528-5:1993)
GB/T 2820.9 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part9: Measurement and Evaluation of Mechanical Vibrations(GB/T 2820.9-2002, ISO 8528-9:1997, MOD)
GB/T 2820.10 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 10: Measurement of Airborne Noise by the Enveloping Surface Method (GB/T 2820.10-2002, ISO 8528-10:1998, MOD)
GB 4556 Reciprocating Internal Combustion Engines - Fire Protection (GB 4556-2001, idt ISO 6826:1997)
GB/T 6072.1-2000 Reciprocating Internal Combustion Engines - Performance - Part 1: Standard Reference Conditions, Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods (idt ISO 3046-1:1995)
GB/T 13306 Plates
GB/T 20136-2006 General Method of Test for Electric Power Plant with Internal Combustion Engines
GB 20891-2007 Limits and Measurement Methods for Exhaust Pollutants from Diesel Engines of Non-road Mobile Machinery (I, II)
JB/T 7606 Technical Requirements for General Assembly of Electric Power Stations with Internal Combustion Engines
ISO 8528-1:2005 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 1: Application, Ratings and Performance
3 Requirements
3.1 General Provisions
3.1.1 The general assembly of set shall meet the requirements of JB/T 7606.
3.1.2 The quality requirements of natural gas are as follows:
a) The low calorific value shall not be lower than 27MJ/m3;
b) The methane content shall not be lower than 76% (volume fraction);
Contents
Foreword I
1 Scope
2 Normative References
3 Requirements
3.1 General Provisions
3.2 Parameters
3.3 Monitoring Instrument
3.4 Standard Reference Conditions
3.5 Category and Operation Mode of Output Power of the Set
3.6 Specified Power Output Conditions
3.7 Start Requirements
3.8 Performance Grade
3.9 Electrical Performance
3.10 Structure
3.11 Environmental Pollution Limit
3.12 Economy
3.13 Safety
3.14 Protective Measures
3.15 Set Monitoring
3.16 Appearance Quality
3.17 Completeness
4 Test
4.1 Instrument
4.2 Test Item
4.3 Test Requirements
4.4 Test Method
5 Inspection Rules
5.1 Inspection Classification
5.2 Judgment Rules
6 Marking, Packaging, Transportation and Storage
6.1 Marking
6.2 Packaging
6.3 Transportation and Storage
1 Scope
This standard specifies the requirements, test, inspection rules, marking, packing, transportation and storage requirements of natural gas generating set (hereinafter referred to as "set") for the petroleum industry.
This standard is applicable to the generating set composed of 3~3150kW reciprocating internal combustion engine with rated frequency of 50Hz and natural gas as fuel, AC generator, control device and auxiliary equipment.
The generating set with other combustible gas as fuel or set with frequency of 60Hz may implement by reference.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 146.1 Rolling Stock Gauge for Standard Gauge Railways
GB 146.2 Structure Gauge for Standard Gauge Railways
GB/T 191 Packaging - Pictorial Marking for Handling of Goods(GB/T 191-2008, ISO 780:1997, MOD)
GB/T 2820.3 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 3: Alternating Current Generators for Generating Gets(GB/T 2820.3-1997, eqv ISO 8528-3:1993)
GB/T 2820.4 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 4: Controlgear and Switchgear(GB/T 2820.4-1997, eqv ISO 8528-4:1993)
GB/T 2820.5-1997 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 5: Generating Sets (eqv ISO 8528-5:1993)
GB/T 2820.9 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part9: Measurement and Evaluation of Mechanical Vibrations(GB/T 2820.9-2002, ISO 8528-9:1997, MOD)
GB/T 2820.10 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 10: Measurement of Airborne Noise by the Enveloping Surface Method (GB/T 2820.10-2002, ISO 8528-10:1998, MOD)
GB 4556 Reciprocating Internal Combustion Engines - Fire Protection (GB 4556-2001, idt ISO 6826:1997)
GB/T 6072.1-2000 Reciprocating Internal Combustion Engines - Performance - Part 1: Standard Reference Conditions, Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods (idt ISO 3046-1:1995)
GB/T 13306 Plates
GB/T 20136-2006 General Method of Test for Electric Power Plant with Internal Combustion Engines
GB 20891-2007 Limits and Measurement Methods for Exhaust Pollutants from Diesel Engines of Non-road Mobile Machinery (I, II)
JB/T 7606 Technical Requirements for General Assembly of Electric Power Stations with Internal Combustion Engines
ISO 8528-1:2005 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 1: Application, Ratings and Performance
3 Requirements
3.1 General Provisions
3.1.1 The general assembly of set shall meet the requirements of JB/T 7606.
3.1.2 The quality requirements of natural gas are as follows:
a) The low calorific value shall not be lower than 27MJ/m3;
b) The methane content shall not be lower than 76% (volume fraction);
Contents of GB/T 22343-2008
Contents
Foreword I
1 Scope
2 Normative References
3 Requirements
3.1 General Provisions
3.2 Parameters
3.3 Monitoring Instrument
3.4 Standard Reference Conditions
3.5 Category and Operation Mode of Output Power of the Set
3.6 Specified Power Output Conditions
3.7 Start Requirements
3.8 Performance Grade
3.9 Electrical Performance
3.10 Structure
3.11 Environmental Pollution Limit
3.12 Economy
3.13 Safety
3.14 Protective Measures
3.15 Set Monitoring
3.16 Appearance Quality
3.17 Completeness
4 Test
4.1 Instrument
4.2 Test Item
4.3 Test Requirements
4.4 Test Method
5 Inspection Rules
5.1 Inspection Classification
5.2 Judgment Rules
6 Marking, Packaging, Transportation and Storage
6.1 Marking
6.2 Packaging
6.3 Transportation and Storage
