GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (English Version)
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
This part of GB/T 5169 specifies the details of the glow-wire test to be applied to end-products for fire hazard testing.
For the purpose of this standard, end-product means electrotechnical equipment, its subassemblies, and components.
One of the responsibilities of a technical committee for standardization, wherever applicable, to make use of basic safety publications in the preparation of its publications.
2 Normative References
The following normative documents contain provisions which, through reference in this part, constitute provisions of this part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 5169.5-1997 Fire Hazard Testing for Electric and Electronic Products-Part 2: Test Methods-Section 2: Needle-flame Test(idt IEC 60695-2-2:1991)
GB/T 5169.10-2006 Fire Hazard Testing for Electric and Electronic Products - Part 10: Glow/Hot-wire Based Test Methods - Glow-wire Apparatus and Common Test Procedure (IEC 60695-2-10:2000,IDT)
ISO/IEC 13943:2000 Fire Safety – Vocabulary
3 Definitions
For the purposes of this part, the definitions given in ISO/IEC 13943:2000 as well as the following definition apply.
3.1
Small parts
Foreword I 1 Scope 2 Normative References 3 Definitions 4 Description of Test Considerations and Test Specimen Selection 5 Description of the Test Apparatus 6 Severities 7 Verification of the Temperature Measuring System 8 Conditioning 9 Initial Measurements 10 Test Procedure 11 Observations and Measurements 12 Evaluation of Test Results 13 Information to Be Given in the Relevant Specification Appendix A (Informative) Guidance for Glow-wire Test
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (English Version)
Standard No.
GB/T 5169.11-2006
Status
superseded
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
100.0
Implemented on
2007-9-1
Delivery
via email in 1 business day
Detail of GB/T 5169.11-2006
Standard No.
GB/T 5169.11-2006
English Name
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
1 Scope
This part of GB/T 5169 specifies the details of the glow-wire test to be applied to end-products for fire hazard testing.
For the purpose of this standard, end-product means electrotechnical equipment, its subassemblies, and components.
One of the responsibilities of a technical committee for standardization, wherever applicable, to make use of basic safety publications in the preparation of its publications.
2 Normative References
The following normative documents contain provisions which, through reference in this part, constitute provisions of this part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 5169.5-1997 Fire Hazard Testing for Electric and Electronic Products-Part 2: Test Methods-Section 2: Needle-flame Test(idt IEC 60695-2-2:1991)
GB/T 5169.10-2006 Fire Hazard Testing for Electric and Electronic Products - Part 10: Glow/Hot-wire Based Test Methods - Glow-wire Apparatus and Common Test Procedure (IEC 60695-2-10:2000,IDT)
ISO/IEC 13943:2000 Fire Safety – Vocabulary
3 Definitions
For the purposes of this part, the definitions given in ISO/IEC 13943:2000 as well as the following definition apply.
3.1
Small parts
Contents of GB/T 5169.11-2006
Foreword I
1 Scope
2 Normative References
3 Definitions
4 Description of Test Considerations and Test Specimen Selection
5 Description of the Test Apparatus
6 Severities
7 Verification of the Temperature Measuring System
8 Conditioning
9 Initial Measurements
10 Test Procedure
11 Observations and Measurements
12 Evaluation of Test Results
13 Information to Be Given in the Relevant Specification
Appendix A (Informative) Guidance for Glow-wire Test
