This Standard specifies structure types, coding methods, overall dimensions, technical requirements, measurement methods, inspection rules, marking and packaging of yaw and blade slewing bearings and drive system bearings of wind power generator set.
This Standard is applicable to the production inspection as well as type selection and acceptance by users for yaw and blade slewing bearings and drive system bearings of wind power generator set.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to (excluding any amendments), or revisions of, are not applicable to this standard; however, parties who come to an agreement according to this Standard are encouraged to research if the latest editions of these references are applicable to this Standard. For any undated references, the latest edition of the document referred to applies.
BG/T 229-1994 Metallic Materials - Charpy Notch Impact Test (Eqv ISO 148:1983)
GB/T 272-1993 Rolling Bearings - Coding Method.
GB/T 273.2-2006 Rolling Bearings-Thrust Bearings - General Plan for Overall Dimension (ISO 104: 2002, IDT)
GB/T 273.3-1999 Rolling Bearings-Radial Bearings General Plan for Overall Dimension (Eqv ISO 15:1998)
GB/T 307.1-2005 Rolling Bearings-Radial Bearings-Tolerance (ISO 492:2002, MOD)
GB/T 307.2-2005 Rolling Bearings-Principles and Methods for Measurement and Inspection (ISO 1132-2: 2001, Rolling Bearings - Tolerances-Part 1: Measurement and Gauging Principles and Methods, MOD).
GB/T 307.3-2005 Rolling Bearings-General Technical Regulations
GB/T 307.4-2002 Rolling Bearings-Thrust Bearings - Tolerance (ISO 199:1997, IDT) GB/T 1357-1987 Involute Cylindrical Gears-Modules
GB/T 3077-1999 Alloy Structure Steels (Neq DIN EN 10083-1: 199)
GB/T 4604-2006 Rolling Bearings-Radial Clearance (ISO 5753:1991, MOD)
GB/T 7736-2001 Ultrasonic Inspecting Method for Macro-structure and Imperfection of Steel
GB/T 7811-1999 Rolling Bearings - Symbols for Quantities
GB/T 8597-2003 Rolling Bearing - Rustproof Packaging
GB/T 8642-2002 Thermal Spraying-Measurement for Tensile Bonding Strength (ISO 14916:1999, MOD)
GB/T 9793-1997 Metallic and Other Inorganic Coating-Thermal Spraying of Zinc, Aluminum and Their Alloy (Eqv ISO 2063:1991)
GB/T 10095.2-2001 Involute Cylindrical Gear-Accuracy - Part 1: Definition and Allowable Values of Deviation Relevant to Corresponding Flanks of Gear Teeth (Idt ISO 1328-1:1997)
GB/T 10095.2-2001 Involute Cylindrical Gear -Accuracy-Part 2: Definition and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information
GB/T 11374-1989 Nondestructive Methods for Measurement of Thermal Spraying Coating Thickness (Neq ISO 2064:1980)
JB/T 1255-2001 Specifications for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel
JB/T 2974-2004 Rolling Bearings-Identification Code-Supplemental Regulations
JB/T 3574-1997 Rolling Bearings-Product Mark
JB/T 8427-1996 Selection and Application Guide for Thermal Spraying Coating of Zinc, Aluminum and Their Alloy for Steel Structure Corrosion Protection
JB/T 8921-1999 Rolling Bearings and Commercial Parts Inspection Rules
JB/T 10471-2004 Rolling Bearings-Slewing Bearings
ZJB J11 038-1993 Military High-Carbon Chromium Bearing Steel Rolling Bearing Parts Heat Treatment Quality Requirements
HG/T 2811-1996 Rubber Materials for Rotary Shaft Lip Seals
3 Symbols
The following symbols as well as those specified in GB/T 7811 are applicable to this Standard.
b: gear width;
D: bearing outside diameter; outer periphery of outer ring diameter of bearings with external gear;
Da: addendum circle diameter of outer gear;
Dpw: center circle diameter of rolling element;
Dw: rolling element diameter;
D1: center circle diameter of installation hole of outer ring;
d: inside diameter of bearings; or surface diameter of inner ring internal column for bearing with internal gear;
da :addendum circle diameter of internal gear;
dn: installation hole diameter;
d1: center circle diameter of installation hole of inner ring;
Fria: radial syntheses runout of inner gear to raceway;
Frea: radial syntheses runout of external gear to raceway;
H: ferrule width of bearing without gear;
h: height difference between inner ring top surface and outer ring top surface;.
m: modulus;
n: number of installation holes;
n1: number of single-row oil holes;
T: bearing width;
x: gear addendum modification factor;
z: number of gears;
△Ds: bearing deviation of a single outside diameter;
△ds: bearing deviation of a single bore diameter;
△Ts: bearing deviation of a single width.
Content Foreword I 1 Scope 2 Normative References 3 Symbols 4 Coding Methods for Bearings 4.1 Coding Method for Yaw and Blade Slewing Bearings 4.2 Coding Methods for Drive System Bearings 4.3 Special Codes 5 Structure Type and Overall Dimension 5.1 Structure Type of Yaw and Blade Slewing Bearings 5.2 Structure Type of Drive System Bearings 5.3 Overall Dimension of Yaw and Blade Slewing Bearings 5.4 Overall Dimension of Drive System Bearings 6 Technical Requirements 6.1 Material and Heat Treatment 6.2 Ferrule Gear of Yaw and Blade Slewing Bearings 6.3 Tolerance 6.4 Surface Roughness 6.5 Clearance 6.6 Start Friction Moment 6.7 Lubrication Hole 6.8 Seal 6.9 Anticorrosive Treatment 6.10 Other Requirements 7 Measurement Methods 7.1 Yaw and Blade Slewing Bearings 7.2 Drive System Bearings 8 Inspection Rules 8.1 Yaw and Blade Slewing Bearings 8.2 Drive System Bearing 9 Mark 10 Rustproof and Packaging. 11 Transport and Storage 11.1 Yaw and Blade Slewing Bearings 11.2 Drive System Bearings Appendix A Appendix B
1 Scope
This Standard specifies structure types, coding methods, overall dimensions, technical requirements, measurement methods, inspection rules, marking and packaging of yaw and blade slewing bearings and drive system bearings of wind power generator set.
This Standard is applicable to the production inspection as well as type selection and acceptance by users for yaw and blade slewing bearings and drive system bearings of wind power generator set.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to (excluding any amendments), or revisions of, are not applicable to this standard; however, parties who come to an agreement according to this Standard are encouraged to research if the latest editions of these references are applicable to this Standard. For any undated references, the latest edition of the document referred to applies.
BG/T 229-1994 Metallic Materials - Charpy Notch Impact Test (Eqv ISO 148:1983)
GB/T 272-1993 Rolling Bearings - Coding Method.
GB/T 273.2-2006 Rolling Bearings-Thrust Bearings - General Plan for Overall Dimension (ISO 104: 2002, IDT)
GB/T 273.3-1999 Rolling Bearings-Radial Bearings General Plan for Overall Dimension (Eqv ISO 15:1998)
GB/T 307.1-2005 Rolling Bearings-Radial Bearings-Tolerance (ISO 492:2002, MOD)
GB/T 307.2-2005 Rolling Bearings-Principles and Methods for Measurement and Inspection (ISO 1132-2: 2001, Rolling Bearings - Tolerances-Part 1: Measurement and Gauging Principles and Methods, MOD).
GB/T 307.3-2005 Rolling Bearings-General Technical Regulations
GB/T 307.4-2002 Rolling Bearings-Thrust Bearings - Tolerance (ISO 199:1997, IDT) GB/T 1357-1987 Involute Cylindrical Gears-Modules
GB/T 3077-1999 Alloy Structure Steels (Neq DIN EN 10083-1: 199)
GB/T 4604-2006 Rolling Bearings-Radial Clearance (ISO 5753:1991, MOD)
GB/T 7736-2001 Ultrasonic Inspecting Method for Macro-structure and Imperfection of Steel
GB/T 7811-1999 Rolling Bearings - Symbols for Quantities
GB/T 8597-2003 Rolling Bearing - Rustproof Packaging
GB/T 8642-2002 Thermal Spraying-Measurement for Tensile Bonding Strength (ISO 14916:1999, MOD)
GB/T 9793-1997 Metallic and Other Inorganic Coating-Thermal Spraying of Zinc, Aluminum and Their Alloy (Eqv ISO 2063:1991)
GB/T 10095.2-2001 Involute Cylindrical Gear-Accuracy - Part 1: Definition and Allowable Values of Deviation Relevant to Corresponding Flanks of Gear Teeth (Idt ISO 1328-1:1997)
GB/T 10095.2-2001 Involute Cylindrical Gear -Accuracy-Part 2: Definition and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information
GB/T 11374-1989 Nondestructive Methods for Measurement of Thermal Spraying Coating Thickness (Neq ISO 2064:1980)
GB/T 18254-2002 High-carbon Chromium Bearing Steel
JB/T 1255-2001 Specifications for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel
JB/T 2974-2004 Rolling Bearings-Identification Code-Supplemental Regulations
JB/T 3574-1997 Rolling Bearings-Product Mark
JB/T 8427-1996 Selection and Application Guide for Thermal Spraying Coating of Zinc, Aluminum and Their Alloy for Steel Structure Corrosion Protection
JB/T 8921-1999 Rolling Bearings and Commercial Parts Inspection Rules
JB/T 10471-2004 Rolling Bearings-Slewing Bearings
ZJB J11 038-1993 Military High-Carbon Chromium Bearing Steel Rolling Bearing Parts Heat Treatment Quality Requirements
HG/T 2811-1996 Rubber Materials for Rotary Shaft Lip Seals
3 Symbols
The following symbols as well as those specified in GB/T 7811 are applicable to this Standard.
b: gear width;
D: bearing outside diameter; outer periphery of outer ring diameter of bearings with external gear;
Da: addendum circle diameter of outer gear;
Dpw: center circle diameter of rolling element;
Dw: rolling element diameter;
D1: center circle diameter of installation hole of outer ring;
d: inside diameter of bearings; or surface diameter of inner ring internal column for bearing with internal gear;
da :addendum circle diameter of internal gear;
dn: installation hole diameter;
d1: center circle diameter of installation hole of inner ring;
Fria: radial syntheses runout of inner gear to raceway;
Frea: radial syntheses runout of external gear to raceway;
H: ferrule width of bearing without gear;
h: height difference between inner ring top surface and outer ring top surface;.
m: modulus;
n: number of installation holes;
n1: number of single-row oil holes;
T: bearing width;
x: gear addendum modification factor;
z: number of gears;
△Ds: bearing deviation of a single outside diameter;
△ds: bearing deviation of a single bore diameter;
△Ts: bearing deviation of a single width.
Contents of JB/T 10705-2007
Content
Foreword I
1 Scope
2 Normative References
3 Symbols
4 Coding Methods for Bearings
4.1 Coding Method for Yaw and Blade Slewing Bearings
4.2 Coding Methods for Drive System Bearings
4.3 Special Codes
5 Structure Type and Overall Dimension
5.1 Structure Type of Yaw and Blade Slewing Bearings
5.2 Structure Type of Drive System Bearings
5.3 Overall Dimension of Yaw and Blade Slewing Bearings
5.4 Overall Dimension of Drive System Bearings
6 Technical Requirements
6.1 Material and Heat Treatment
6.2 Ferrule Gear of Yaw and Blade Slewing Bearings
6.3 Tolerance
6.4 Surface Roughness
6.5 Clearance
6.6 Start Friction Moment
6.7 Lubrication Hole
6.8 Seal
6.9 Anticorrosive Treatment
6.10 Other Requirements
7 Measurement Methods
7.1 Yaw and Blade Slewing Bearings
7.2 Drive System Bearings
8 Inspection Rules
8.1 Yaw and Blade Slewing Bearings
8.2 Drive System Bearing
9 Mark
10 Rustproof and Packaging.
11 Transport and Storage
11.1 Yaw and Blade Slewing Bearings
11.2 Drive System Bearings
Appendix A
Appendix B
