This document specifies the classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of bamboo parallel sliver lumber.
This document is applicable to plates and squared timbers made of bamboo sliver.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2406 Test method for fammability characteristics of plastics - Oxygen index method
GB/T 2408 Plastics - Determination of burning characteristics - Horizontal and vertical test
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 17657-2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 18269-2018 Terminology for wood-based panels and their surface decoration
GB/T 19367-2009 Wood-based panels - Determination of dimensions of panels
GB/T 36394-2018 Terminology of bamboo products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18269-2018 and GB/T 36394-2018 as well as the following apply.
3.1
bamboo parallel sliver lumber
bamboo plate and squared timber made of bamboo sliver by dipping bamboo into adhesive solution in bundles, paving in the same direction, hot pressing and other processes, which can be used indoors and outdoors
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transportation and storage
LY/T 1072-2022 Bamboo parallel sliver lumber
1 Scope
This document specifies the classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of bamboo parallel sliver lumber.
This document is applicable to plates and squared timbers made of bamboo sliver.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2406 Test method for fammability characteristics of plastics - Oxygen index method
GB/T 2408 Plastics - Determination of burning characteristics - Horizontal and vertical test
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 17657-2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 18269-2018 Terminology for wood-based panels and their surface decoration
GB/T 19367-2009 Wood-based panels - Determination of dimensions of panels
GB/T 36394-2018 Terminology of bamboo products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18269-2018 and GB/T 36394-2018 as well as the following apply.
3.1
bamboo parallel sliver lumber
bamboo plate and squared timber made of bamboo sliver by dipping bamboo into adhesive solution in bundles, paving in the same direction, hot pressing and other processes, which can be used indoors and outdoors
Contents of LY/T 1072-2022
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
