1 Scope
This standard specifies such data base as the type, nominal pressure, nominal volume and nominal diameter of steel liquefied petroleum gas horizontal tank (hereinafter referred to as horizontal tank); cylinder length, cylinder thickness, formed head thickness, installation dimension, pipe orifice name, pipe orifice dimension and horizontal tank quality.
This standard is applicable to the horizontal tank used for storing liquefied petroleum gas and for which insulation facilities is not equipped with.
2 Normative References
The following references are essential for the application of this standard. For the dated normative references, only the dated editions are applicable to this document. For undated references, the latest edition of the normative document (including all the amendments) referred to applies.
GB 150 Steel Pressure Vessels
JB/T 4731 Steel horizontal Vessels on Saddle Supports
JB/T 4712 Vessel Supports
JB/I 4746 Formed Heads for Steel Pressure Vessels
HG/T 20592 ~ HG/T 20635—2009 Steel Pipe Flanges, Gaskets and Bolting
HG/T 21524—2005 Manhole of Butt-welded Flange with Horizontal Hanging Cover and Hub
TSG R0004—2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
3 Horizontal tank type and model
3.1 Horizontal tank type
Types of horizontal tanks with their nominal volumes being 3m3 ~ 5m3, 8m3 ~ 50m3 and 80m3~ 1503 and are shown in Figure 1, Figure 2 and Figure 3 respectively. The installation dimension of a horizontal tank is shown in Figure 4.
Foreword
1 Scope
2 Normative References
3 Horizontal tank type and model
4 Data base of horizontal tank
NB/T 47001-2009, NB 47001-2009, NBT 47001-2009, NB/T47001-2009, NB/T 47001, NB/T47001, NB47001-2009, NB 47001, NB47001, NBT47001-2009, NBT 47001, NBT47001
Introduction of NB/T 47001-2009
1 Scope
This standard specifies such data base as the type, nominal pressure, nominal volume and nominal diameter of steel liquefied petroleum gas horizontal tank (hereinafter referred to as horizontal tank); cylinder length, cylinder thickness, formed head thickness, installation dimension, pipe orifice name, pipe orifice dimension and horizontal tank quality.
This standard is applicable to the horizontal tank used for storing liquefied petroleum gas and for which insulation facilities is not equipped with.
2 Normative References
The following references are essential for the application of this standard. For the dated normative references, only the dated editions are applicable to this document. For undated references, the latest edition of the normative document (including all the amendments) referred to applies.
GB 150 Steel Pressure Vessels
JB/T 4731 Steel horizontal Vessels on Saddle Supports
JB/T 4712 Vessel Supports
JB/I 4746 Formed Heads for Steel Pressure Vessels
HG/T 20592 ~ HG/T 20635—2009 Steel Pipe Flanges, Gaskets and Bolting
HG/T 21524—2005 Manhole of Butt-welded Flange with Horizontal Hanging Cover and Hub
TSG R0004—2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
3 Horizontal tank type and model
3.1 Horizontal tank type
Types of horizontal tanks with their nominal volumes being 3m3 ~ 5m3, 8m3 ~ 50m3 and 80m3~ 1503 and are shown in Figure 1, Figure 2 and Figure 3 respectively. The installation dimension of a horizontal tank is shown in Figure 4.
Contents of NB/T 47001-2009
Foreword
1 Scope
2 Normative References
3 Horizontal tank type and model
4 Data base of horizontal tank