This standard specifies the requirements, test methods, inspection rules, marking, package, storage and preservation of automotive alternator.
This standard is applicable to automotive alternator (hereinafter referred to as "alternator").
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 18655 Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles (idt IEC/CISPR 25)
QC/T 413-2002 Basic Technical Requirements for Automotive Electric Equipment
QC/T 424 Test Method for Electrical Characteristic of Automotive Alternator
ISO 7637-2:2004 Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 2: Electrical Transient Conduction along Supply Lines Only
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
Test voltage, Ut
The specified voltage value when testing the characteristics of output current.
3.2
Rated speed, nR
The speed of alternator when testing the hot-state rated current output IR at the ambient temperature of 23℃±5℃ and test voltage Ut.
3.3
Maximum operating speed, nmax
The maximum rotation speed that may appear when alternator is actually used.
3.4
Cold output of alternator
The cold current output value of alternator at the ambient temperature of 23℃±5℃ and test voltage Ut.
3.5
Hot output of alternator
The current output value of the alternator when it operates continuously for more than 0.5h at the ambient temperature of 23℃±5℃ and test voltage Ut and its body temperature reaches stable state.
4 Requirements
Contents Foreword i 1 Scope 2 Normative References 3 Terminologies and Definitions 4 Requirements 5 Test Methods 6 Inspection Rules 7 Marking, Packaging, Storage and Preservation Appendix A (Normative) Generator Operating Performance at Cold and Hot State
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, package, storage and preservation of automotive alternator.
This standard is applicable to automotive alternator (hereinafter referred to as "alternator").
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 18655 Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles (idt IEC/CISPR 25)
QC/T 413-2002 Basic Technical Requirements for Automotive Electric Equipment
QC/T 424 Test Method for Electrical Characteristic of Automotive Alternator
ISO 7637-2:2004 Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 2: Electrical Transient Conduction along Supply Lines Only
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
Test voltage, Ut
The specified voltage value when testing the characteristics of output current.
3.2
Rated speed, nR
The speed of alternator when testing the hot-state rated current output IR at the ambient temperature of 23℃±5℃ and test voltage Ut.
3.3
Maximum operating speed, nmax
The maximum rotation speed that may appear when alternator is actually used.
3.4
Cold output of alternator
The cold current output value of alternator at the ambient temperature of 23℃±5℃ and test voltage Ut.
3.5
Hot output of alternator
The current output value of the alternator when it operates continuously for more than 0.5h at the ambient temperature of 23℃±5℃ and test voltage Ut and its body temperature reaches stable state.
4 Requirements
Contents of QC/T 729-2005
Contents
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Storage and Preservation
Appendix A (Normative) Generator Operating Performance at Cold and Hot State
