This specification specifies the form of pump area, selection of pump and motor, arrangement of pump unit and design requirements for pipeline.
This specification is applicable to the design of new construction, extension or reconstruction engineering of pump area for liquid material of storage and transportation system in petrochemical industry.
Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Pump Area Setup 4.1 Mode of Pump Area 4.2 Requirement of Pump House and Shed 4.3 Pump Area Arrangement 5 Pump Selection 5.1 Pump Type Selection 5.2 Pump Process Parameters 5.3 Pump Setup 5.4 Pump Flow Control 5.5 Seal Type Selection 5.6 Material Selection 6 Motor Selection 6.1 Types of Motor 6.2 Shaft Power of Pump and Power of Motor 7 Pump Arrangement and Piping 7.1 Requirement of Pump Arrangement 7.2 Sizing of Pipes 7.3 Piping for Pumps 8 Auxiliary Facility 8.1 Instrumentation 8.2 HAVC 8.3 Water Supply and Drains 9 Safety and Others Annex A (Informative) Ordinary Liquid Material Sorting A.1 Classification for Hazard of Liquefied Hydrocarbon and Combustible. A.2 Classification for Hazard of Occupational Exposure to Toxicant A.3 Classification for Corrosion of Acid & Alkali to Building Materials Annex B (Normative) Process Calculation for Pumps B.1 Parameters Calculation B.2 Shaft Power of Pump B.3 Power of Motor Annex C (Normative) Pump Protect Piping Explanation of Wording in This Specification
SH/T 3014-2012, SH 3014-2012, SHT 3014-2012, SH/T3014-2012, SH/T 3014, SH/T3014, SH3014-2012, SH 3014, SH3014, SHT3014-2012, SHT 3014, SHT3014
Introduction of SH/T 3014-2012
This specification specifies the form of pump area, selection of pump and motor, arrangement of pump unit and design requirements for pipeline.
This specification is applicable to the design of new construction, extension or reconstruction engineering of pump area for liquid material of storage and transportation system in petrochemical industry.
Contents of SH/T 3014-2012
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Pump Area Setup
4.1 Mode of Pump Area
4.2 Requirement of Pump House and Shed
4.3 Pump Area Arrangement
5 Pump Selection
5.1 Pump Type Selection
5.2 Pump Process Parameters
5.3 Pump Setup
5.4 Pump Flow Control
5.5 Seal Type Selection
5.6 Material Selection
6 Motor Selection
6.1 Types of Motor
6.2 Shaft Power of Pump and Power of Motor
7 Pump Arrangement and Piping
7.1 Requirement of Pump Arrangement
7.2 Sizing of Pipes
7.3 Piping for Pumps
8 Auxiliary Facility
8.1 Instrumentation
8.2 HAVC
8.3 Water Supply and Drains
9 Safety and Others
Annex A (Informative) Ordinary Liquid Material Sorting
A.1 Classification for Hazard of Liquefied Hydrocarbon and Combustible.
A.2 Classification for Hazard of Occupational Exposure to Toxicant
A.3 Classification for Corrosion of Acid & Alkali to Building Materials
Annex B (Normative) Process Calculation for Pumps
B.1 Parameters Calculation
B.2 Shaft Power of Pump
B.3 Power of Motor
Annex C (Normative) Pump Protect Piping
Explanation of Wording in This Specification
