| Title |
Standard No. |
Implemented On |
| QJ A 1456-1997 General Specification for Single-Freedom-Degree Liquid Rate Integrating Gyroscope | QJ A 1456-1997 | |
| QJ A 94-1997 Parts and Components of Machine Tool Fixture - V-type Positioner | QJ A 94-1997 | |
| QJ A 72-1997 The Parts and Units of Jigs and Fixtures - Transfer Face Plate Equipped with Safety Device | QJ A 72-1997 | |
| QJ A 624-1998 Packaging Box Accessory - E-type and F-type Angle Support | QJ A 624-1998 | |
| General Specification for Insert of Honeycomb-sandwich Structure | QJ 3295-2008 | |
| QJ A 1914-1997 Thesaurus of Aerospace Industry Document and Amanuensis | QJ A 1914-1997 | |
| General Specification for 50t Launching and Transporting & Transferring Vehicle Chassis of Missile | QJ 3316-2008 | |
| QJ A 964-1999 Guide for Standard Design of Space Product | QJ A 964-1999 | |
| QJ A 1731-1998 General Specifications for Solar Panel | QJ A 1731-1998 | |
| QJ A 2140-1997 High Altitude Simulation Test for Missile Used Turbojet | QJ A 2140-1997 | |
| QJ A 829-1995 Voltage, Current and Frequency of Power Converter | QJ A 829-1995 | |
| QJ A 615-1998 Packaging Box Accessory - Buckle Lock | QJ A 615-1998 | |
| QJ A 1906-1997 Destructive Physical Analysis (DPA) Methods and Procedures for Semiconductor Devices | QJ A 1906-1997 | |
| Classification of Disperse Porosity for ZL104 Alloy Castings | QJ 1309A-2008 | |
| General Specification for Weapon System of Man Portable Air-defence Missile | QJ 3315-2008 | |
| QJ A 167-1995 General Technical Specifications for thermoplastic Plastic Compression Parts | QJ A 167-1995 | |
| QJ A 919-1998 General Technical Specification for Manufacture and Acceptance of Conduit | QJ A 919-1998 | |
| QJ A 73-1997 The Parts and Units of Jigs and Fixtures - Lathe Face Plate | QJ A 73-1997 | |
| QJ A 1714.6-1999 Management Rules for Design Documents of Space Product - Integrality of Design Documents | QJ A 1714.6-1999 | |
| Method for Ground Test of Hydrogen Peroxide and Kerosene Engine | QJ 3310-2008 | |
| QJ A 649-1998 Packaging Box Accessory - Technical Specification | QJ A 649-1998 | |
| Requirement for Flight Software Simulation of Trajectory Missile and Launch Vehicle | QJ 2187A-2008 | |
| Specification for Stainless Steel Fiber Filters and Filter Elements | QJ 3309-2008 | |
| QJ A 1556-1998 Quality and Reliability Information Collection Card Filling Specifications of Electronic Devices | QJ A 1556-1998 | |
| QJ A 1714.1-1999 Management Rules for Design Documents of Space Product - General Rules | QJ A 1714.1-1999 | |
| QJ A 609-1998 Packaging Box Accessory - Leather Handle | QJ A 609-1998 | |
| QJ A 1241-1997 General Specification for Single-Freedom-Degree Static-Pressure and Liquid-Floated Integrating Gyroscope | QJ A 1241-1997 | |
| QJ A 177.6-1995 General Clamp - Double-sides Fixed Single Clamp | QJ A 177.6-1995 | |
| QJ A 1714.3-1999 Management Rules for Design Documents of Space Product - The Title Blocks and List Blocks of Design Documents | QJ A 1714.3-1999 | |
| QJ A 1663-1998 Altitude Simulation Test Method for Attitude Control Rocket Motor | QJ A 1663-1998 | |
| QJ A 903.11-1995 Management System of Technological Document for Space Product - Numbering Method for Technological Document | QJ A 903.11-1995 | |
| General Specification for Cruise Missile Fuel Tank | QJ 3301-2008 | |
| QJ A 953-1995 Technical Specification for Quality Acceptance before Chemical Milling of Metal | QJ A 953-1995 | |
| QJ A 1175-1996 X-Radiographic Testing Method for Steel Plate Welded Butt Joint | QJ A 1175-1996 | |
| QJ A 1886-1997 General Specifications for Microwave Devices | QJ A 1886-1997 | |
| QJ A 1327-1998 General Requirements for Safety of Low Temperature Tank-truck | QJ A 1327-1998 | |
| QJ A 1714.8-1999 Management Rules for Design Documents of Space Product - Preparation of Design Documents in Texture Content | QJ A 1714.8-1999 | |
| QJ A 903.6-1995 Management System of Technological Document for Space Product - Modification Specification for Technological Document | QJ A 903.6-1995 | |
| Signature Rules for the Digitalisation Design Documents of Space Products | QJ 3298-2008 | |
| QJ A 1091-1998 Management Provisions for Use and Filing of Design Document | QJ A 1091-1998 | |
| QJ A 2208-1997 General Specification for Hydraulic System of Ground Support Equipment | QJ A 2208-1997 | |
| QJ A 1088-1996 Sensor Technology Conditions of Thermocouple Thermometer for Rocket Engine Test | QJ A 1088-1996 | |
| QJ A 903.9-1995 Management System of Technological Document for Space Product - Preparation Rule for Technological Document used for Management | QJ A 903.9-1995 | |
| QJ A 177.1-1995 General Clamp - Light Type Single-side Fixed Single Clamp | QJ A 177.1-1995 | |
| QJ A 903.28-1995 Management System of Technological Document for Space Product - Preparation Rule for Mould Pressing Composite Mmaterial Forming Technological Document | QJ A 903.28-1995 | |
| QJ A 805-1997 The Parts and Units of Jigs and Fixtures - Rack Type Locator | QJ A 805-1997 | |
| QJ A 1908-1998 Inspection Method for Semiconductor Devices in Uncovering Acceptance | QJ A 1908-1998 | |
| Acceptance Technical Requirement for Bomblet Fuze of Ground-to-ground Missile | QJ 3317-2008 | |
| Requirements for DSP-TMS Series Assembly Language Programming of Aerospace Product | QJ 3300-2008 | |
| QJ A 1714.10-1999 Management Rules for Design Documents of Space Product - Borrowing Rules for Affiliated Number Design Documents | QJ A 1714.10-1999 | |
| Requirement for Experiments on Control System Simulation | QJ 1659A-2008 | |
| QJ A 177.2-1995 General Clamp - Single-side Fixed Single Clamp | QJ A 177.2-1995 | |
| QJ A 177.17-1995 General Clamp - Screw Adjustable Clamp | QJ A 177.17-1995 | |
| QJ A 177.13-1995 General Clamp - No-ear Elastic Clamp | QJ A 177.13-1995 | |
| QJ A 1181.2-1995 Heat Treatment for Magnetically Soft Alloy - Magnetically Soft Alloy with High Saturation Flux Density | QJ A 1181.2-1995 | |
| QJ A 903.19-1995 Management System of Technological Document for Space Product - Preparation Rule for Planting, Converting and Coating Technological Document | QJ A 903.19-1995 | |
| QJ A 903.29-1995 Management System of Technological Document for Space Product - Preparation Rule for Optical Element Machining Technological Document | QJ A 903.29-1995 | |
| QJ A 1796-1998 General Specifications for Separable (Umbilical) Electric Connectors | QJ A 1796-1998 | |
| Functions & Application Requirements for Test Launch and Control System of Ground to Ground Missile | QJ 2149A-2008 | |
| QJ A 1831-1998 Production Quality of Liquid Rocket Engine - Information Collection Card and Filling Specification | QJ A 1831-1998 | |
| QJ A 92.1-1997 The Parts and Units of Jigs and Fixtures - Type I Guide Board | QJ A 92.1-1997 | |
| QJ A 903.27-1995 Management System of Technological Document for Space Product - Preparation Rule for Strap-wound Composite Material Forming Technological Document | QJ A 903.27-1995 | |
| QJ A 1838-1999 Technical Requirements for Satellite General Assembly Sealing Leak Test | QJ A 1838-1999 | |
| QJ A 903.18-1995 Management System of Technological Document for Space Product - Preparation Rule for Assembly Technological Document | QJ A 903.18-1995 | |
| QJ A 1279-1995 Terms of Infrared Seeker | QJ A 1279-1995 | |
| QJ A 177.10-1995 General Clamp - Hanging Single Clamp | QJ A 177.10-1995 | |
| Inserts for Honeycomb-sandwich Structure - Part 2:Inserts,with Clearance Hole,Open Type B | QJ 3296.2-2008 | |
| QJ A 2236-1999 Security Assurance Requirements of Space Product | QJ A 2236-1999 | |
| QJ A 1016-1998 General Specifications for Pipeline System of Liquid Rocket Engine | QJ A 1016-1998 | |
| QJ A 74-1997 The Parts and Units of Jigs and Fixtures - Safety Device of Lathe Face Plate | QJ A 74-1997 | |
| QJ A 1880-1997 Classification Standard for High-precision, Large-sized, Critical and Valuable Equipment | QJ A 1880-1997 | |
| QJ A 1181.4-1995 Heat Treatment for Magnetically Soft Alloy - Magnetic Temperature Compensation Alloy | QJ A 1181.4-1995 | |
| QJ A 903.4-1995 Management System of Technological Document for Space Product - Integrity of Technological Document | QJ A 903.4-1995 | |
| The Structure Type and Dimension Order of Composite Cabinet Part 6: the Structure and Dimension Order of Accessories | QJ 1909.6A-2008 | |
| QJ A 1156-1996 Technical Specifications for Hard Soldering of Steel Parts | QJ A 1156-1996 | |
| QJ A 908-1998 Aging Test Method for Electronic Products | QJ A 908-1998 | |
| QJ A 1714.7-1999 Management Rules for Design Documents of Space Product - Preparation of Design Documents in Table Form | QJ A 1714.7-1999 | |
| Inserts for Honeycomb-sandwich Structure - Part 10: Inserts, Self-locking, with Threads, Open Type | QJ 3296.10-2008 | |
| Heat Treatment of Hysteresis Alloys | QJ 1398A-2008 | |
| Inserts for Honeycomb-sandwich Structure - Part 1:Inserts,with Clearance Hole,Open Type A | QJ 3296.1-2008 | |
| QJ A 98-1997 The Parts and Units of Jigs and Fixtures - Support | QJ A 98-1997 | |
| QJ A 1493-1997 General Specification for Filling and Overflow Connector of Liquid Rocket | QJ A 1493-1997 | |
| Design Rules and Methods for Vibration Control On-board Electronic Equipment | QJ 2841A-2008 | |
| QJ A 607-1998 Packaging Box Accessory - Fixed Handle | QJ A 607-1998 | |
| Specification for J63 Minisize Rectangle Electrical Connectors | QJ 3302-2008 | |
| QJ A 177.4-1995 General Clamp - Plate for Middle Fixed Double Clamps | QJ A 177.4-1995 | |
| Application Requirements for Can Bus of Electronic System in Missile/Launch Vehicle | QJ 3304-2008 | |
| QJ A 647-1995 Terms of Nuclear, Microgravity, Static Electricity and Electromagnetic Environment For Space Product | QJ A 647-1995 | |
| QJ A 1195.5-1997 Equipment Repair Man-hour Cost Pause Time Quota | QJ A 1195.5-1997 | |
| Test Requirements of Onboard Computer | QJ 3318-2008 | |
| QJ A 2344-1997 Qualification and Certification for Welder of Aerospace Industry | QJ A 2344-1997 | |
| QJ A 792-1997 The Parts and Units of Jigs and Fixtures - Compression Screw Equipped with Reversing Handle | QJ A 792-1997 | |
| General Clamp - Side Fixed Single Clamp | QJ A 177.5-1995 | |
| Rules for Filling in Parts Quality and Reliability Information Collection Card | QJ 1556B-2008 | |
| QJ A 1714.11-1999 Management Rules for Design Documents of Space Product - Modification Rules of Design Documents | QJ A 1714.11-1999 | |
| QJ A 903.15-1995 Management System of Technological Document for Space Product - Preparation Rule for Casting Technological Document | QJ A 903.15-1995 | |
| Measurement Method for Thrust Vector of Solid Rocket Motor Static Firing Test | QJ 3312-2008 | |
| QJ A 622-1998 Packaging Box Accessory - C-type Angle Support | QJ A 622-1998 | |
| QJ A 807-1997 The Parts and Units of Jigs and Fixtures - Vice-like Clamping Device | QJ A 807-1997 | |
| QJ A 1446-1998 Thermal Vacuum Test Method of Satellite | QJ A 1446-1998 | |
| QJ A 604-1998 Packaging Box Accessory - Handle | QJ A 604-1998 | |
| QJ A 608-1998 Packaging Box Accessory - Draper-type Handle | QJ A 608-1998 | |
| Centrifugal Static Test Method for Solid Rocket Motor | QJ 3307-2008 | |
| QJ A 1462-1999 Technical Requirements for Process of Acidic Bright Copper Plating | QJ A 1462-1999 | |
| QJ A 1097-1997 General Specifications for Ball Valve | QJ A 1097-1997 | |
| QJ A 71-1997 The Parts and Units of Jigs and Fixtures - Face Plate (Blank) | QJ A 71-1997 | |
| QJ A 802-1997 The Parts and Units of Jigs and Fixtures - Plane Locator | QJ A 802-1997 | |
| General Specification for Cruise Missile Cable Net | QJ 3313-2008 | |
| QJ A 1716-1998 CAD and Manufacturing Terms of Aerospace & Mechanical Product | QJ A 1716-1998 | |
| QJ A 1042-1998 Ground Test Method for Hydrogen-oxygen Rocket Engine | QJ A 1042-1998 | |
| QJ A 177.8-1995 General Clamp - Hanging Symmetry Single Clamp | QJ A 177.8-1995 | |
| QJ A 1181.5-1995 Heat Treatment for Magnetically Soft Alloy - Anti-corrosion Magnetically Soft Alloy | QJ A 1181.5-1995 | |
| QJ A 1467-1997 Test Methods for Power Converter | QJ A 1467-1997 | |
| QJ A 1447-1995 Development Procedure of Ground Guidance Station | QJ A 1447-1995 | |
| QJ A 1386-1995 Metal Material Reinspection Rules | QJ A 1386-1995 | |
| Inserts for Honeycomb-sandwich Structure - Part 4:Inserts,with Threads,Open Type A | QJ 3296.4-2008 | |
| Software Maintenance for Space Products | QJ 2543A-2008 | |
| QJ A 1090-1998 Management Provisions for Use and Filing of Research Trial | QJ A 1090-1998 | |
| QJ A 1448-1995 Development Procedure of Ground Guidance Station | QJ A 1448-1995 | |
| General Specification for Distributors of Missle and Launch Vehicle | QJ 3297-2008 | |
| QJ A 177.11-1995 General Clamp - Hanging Double Clamps | QJ A 177.11-1995 | |
| QJ A 917-1997 Determination Method for Density of Composite Solid Propellant, Liner and Thermal Insulation Material | QJ A 917-1997 | |
| QJ A 605-1998 Packaging Box Accessory - Handle on Top Surface | QJ A 605-1998 | |
| QJ A 903.5-1995 Management System of Technological Document for Space Product - Sign Specification for Technological Document | QJ A 903.5-1995 | |
| QJ A 893-1999 The Relevant Requirements of Standard Selection, Update and Supersedure | QJ A 893-1999 | |
| QJ A 903.14-1995 Management System of Technological Document for Space Product - Preparation Rule for Thermal Treatment Technological Document | QJ A 903.14-1995 | |
| Technical Requirements for Bonded Technique of Forming of the Fairing Aluminum Honeycomb-sandwich Structures | QJ 1380A-2008 | |
| General Specification for Ground Support Equipments of Safety and Self-destruction System of Strategic Missile | QJ 2250A-2008 | |
| QJ A 1714.5-1999 Management Rules for Design Documents of Space Product - Numbering Rules of Design Documents | QJ A 1714.5-1999 | |
| QJ A 177.12-1995 General Clamp - Double-sides Fixed Clamp | QJ A 177.12-1995 | |
| QJ A 954-1995 Technical Specification for Metal Product Acceptance of Chemical Milling | QJ A 954-1995 | |
| QJ A 1171-1995 Preparation and Judgment Rules of Aerospace Scientific and Technical Report | QJ A 1171-1995 | |
| Commonly Used Coordinate System for Space Products | QJ 1028B-2008 | |
| Incoming Inspection Specification for Standard Fasteners of Space Products | QJ 3112A-2008 | |
| QJ A 903.2-1995 Management System of Technological Document for Space Product - General Requirements for Technological Document Preparation | QJ A 903.2-1995 | |
| QJ A 177.3-1995 General Clamp - Middle Fixed Double Clamps | QJ A 177.3-1995 | |
| Inserts for Honeycomb-sandwich Structure - Part 11:Inserts,Self-locking,with Threads,Closed Type | QJ 3296.11-2008 | |
| General Specification for the Fuse Antenna on Missile | QJ 2778A-2008 | |
| QJ A 903.22-1995 Management System of Technological Document for Space Product - Preparation Rule for Winding and Dipping Technological Document | QJ A 903.22-1995 | |
| QJ A 1570.3-1997 Classification Standards for Precise, Large-Sized, Valuable and Rare Instrument and Apparatus | QJ A 1570.3-1997 | |
| QJ A 96-1997 The Parts and Units of Jigs and Fixtures - Siding Flat-end Pressure Plate | QJ A 96-1997 | |
| QJ A 913-1995 Analysis Method for Aluminum Powder Content in Composite Solid Propellant | QJ A 913-1995 | |
| QJ A 177.9-1995 General Clamp - Hanging Elastic Single Clamp | QJ A 177.9-1995 | |
| QJ A 794-1997 The Parts and Units of Jigs and Fixtures - Single-handle Nut | QJ A 794-1997 | |
| QJ A 903.20-1995 Management System of Technological Document for Space Product - Preparation Rule for Plastic, Rubber Forming and Cementing & Encapsulating Technological Document | QJ A 903.20-1995 | |
| Safety Management Requirement for Solid missile Final Assembly and Test | QJ 3293-2008 | |
| QJ A 1714.12-1999 Management Rules for Design Documents of Space Product - Rules for Design Documents Deviation | QJ A 1714.12-1999 | |
| Guidence for Identification of Spaceflight Industrial Hazard Installations | QJ 3299-2008 | |
| QJ A 903.30-1995 Management System of Technological Document for Space Product - Preparation Rule for Composite Solid Propellant and Engine Final Assembly Technological Document | QJ A 903.30-1995 | |
| Inserts for Honeycomb-sandwich Structure - Part 3:Inserts,with Clearance Hole,Open Type C | QJ 3296.3-2008 | |
| Inserts for Honeycomb-sandwich Structure - Part 9:Inserts,with Clearance Hole,with Countersink | QJ 3296.9-2008 | |
| QJ A 806-1997 The Parts and Units of Jigs and Fixtures - Rack Type Locator Equipped with Axial Fastening Screw | QJ A 806-1997 | |
| General Specification for the Missile Hooking Vehicle of Tactical Missile | QJ 1972A-2008 | |
| QJ A 1714.2-1999 Management Rules for Design Documents of Space Product - Symbols of Design Documents | QJ A 1714.2-1999 | |
| QJ A 176-1999 General Technical Specifications for Ground Equipment Fusion Welding | QJ A 176-1999 | |
| QJ A 903.8-1995 Management System of Technological Document for Space Product - Preparation Rule for Overall Scheme of Technology | QJ A 903.8-1995 | |
| General Specification for Gas Generator of Liquid Propellant Rocket Engine | QJ 2295A-2008 | |
| QJ A 92.2-1997 The Parts and Units of Jigs and Fixtures - Type II Guide Board | QJ A 92.2-1997 | |
| QJ A 808-1997 The Parts and Units of Jigs and Fixtures - Axial Clamping Device | QJ A 808-1997 | |
| Installation Requirements for Insert of Honeycomb-sandwich Structure | QJ 3294-2008 | |
| Management Rules for Control Hazard Installations | QJ 2867A-2008 | |
| QJ A 903.23-1995 Management System of Technological Document for Space Product - Preparation Rule for Electrical Physical Machining Technological Document | QJ A 903.23-1995 | |
| QJ A 1092-1998 Technical Record Management form | QJ A 1092-1998 | |
| QJ A 166-1995 General Technical Specifications for Thermosetting Plastic Compression Part | QJ A 166-1995 | |
| General Specification for Missile (Launch Vehicle) Gas Reducing Valve | QJ 1143A-2008 | |
| General Specification for Gunpowder Starter | QJ 3314-2008 | |
| QJ A 2045-1998 Heat Treatment of Elastic Alloy | QJ A 2045-1998 | |
| General Specification for Radio-frequency Coaxial Relays | QJ 3303-2008 | |
| QJ A 831-1998 General Specification for Multilayer Printed Wiring Board Used in Space | QJ A 831-1998 | |
| QJ A 903.24-1995 Management System of Technological Document for Space Product - Preparation Rule for Electrolytic Machining Technological Document | QJ A 903.24-1995 | |
| The Structure Type and Dimension Order of Composite Cabinet Part 1: the Structure and Dimension Order of Whole Cabinet | QJ 1909.1A-2008 | |
| The Structure Type and Dimension Order of Composite Cabinet Part 5: the Structure and Dimension Order of Door | QJ 1909.5A-2008 | |
| QJ A 1034-1998 General Specification for Throttle Valve | QJ A 1034-1998 | |
| Emc Design Requirement for Tactical Missile Seeker | QJ 3306-2008 | |
| QJ A 177.18-1995 General Clamp - Metal Strap | QJ A 177.18-1995 | |
| QJ A 2246-1998 Parameters for Explosive Bolts | QJ A 2246-1998 | |
| General Specification for Explosive Actuated Cutter | QJ 3311-2008 | |
| QJ A 623-1998 Packaging Box Accessory - D-type Angle Support | QJ A 623-1998 | |
| QJ A 95-1997 The Parts and Units of Jigs and Fixtures - Knurled Screw | QJ A 95-1997 | |
| QJ A 903.3-1995 Management System of Technological Document for Space Product - Cover and Main Title Column | QJ A 903.3-1995 | |
| QJ A 793-1997 The Parts and Units of Jigs and Fixtures - Reversing Handle | QJ A 793-1997 | |
| QJ A 1181.1-1995 Heat Treatment for Magnetically Soft Alloy - Fe-Ni Magnetically Soft Alloy | QJ A 1181.1-1995 | |
| QJ A 1951-1998 General Specifications for Restrictive Detonating Cords | QJ A 1951-1998 | |
| QJ A 1080-1997 Calculation Method for Liquid Rocket Quality, Center of Mass and Moment of Inertia | QJ A 1080-1997 | |
| QJ A 1293-1998 Parameter Symbols of Aerodynamics | QJ A 1293-1998 | |
| QJ A 804-1997 The Parts and Units of Jigs and Fixtures - Outer Diameter Centring Disk Spring Leaf | QJ A 804-1997 | |
| QJ A 300-1995 Intensity Data of Regular Screw Thread, Bolt and Screw | QJ A 300-1995 | |
| QJ A 1705-1998 Assembling and Division Requirements for Liquid Rocket Engine | QJ A 1705-1998 | |
| General Requirement for Manufacture of Missile (Launch Vehicle) Valve | QJ 3305-2008 | |
| QJ A 97-1997 The Parts and Units of Jigs and Fixtures - Sliding Elbow Pressure Plate | QJ A 97-1997 | |
| QJ A 103.1-1997 The Parts and Units of Jigs and Fixtures - I-type Lengthened Fast Change Drill Bush | QJ A 103.1-1997 | |
| QJ A 903.12-1995 Management System of Technological Document for Space Product - Preparation Rule for Machining Technological Document | QJ A 903.12-1995 | |
| QJ A 619-1998 Packaging Box Accessory - Wrap Angle | QJ A 619-1998 | |
| QJ A 903.17-1995 Management System of Technological Document for Space Product - Preparation Rule for Welding Technological Document | QJ A 903.17-1995 | |
| QJ A 1703-1998 Heat Treatment of Cast Aluminium Alloy | QJ A 1703-1998 | |
| QJ A 903.7-1995 Management System of Technological Document for Space Product - Preparation Rule for General Technological Document | QJ A 903.7-1995 | |
| Instrumentation Method for Volume Increase for Filament-wound Case of Solid Rocket Motor | QJ 3308-2008 | |
| QJ A 1408-1998 Requirements for Reliability Assurance of Space Product | QJ A 1408-1998 | |
| QJ A 2171-1998 Assurance Requirements for Aerospace Product | QJ A 2171-1998 | |
| QJ A 606-1998 Packaging Box Accessory - Handle on Side Face | QJ A 606-1998 | |
| QJ A 2574-1998 Safety Requirements for Satellite General Installation | QJ A 2574-1998 | |
| QJ A 177.15-1995 General Clamp - Clamp Device | QJ A 177.15-1995 | |
| General Specification for the Seeker Antenna on Missiles | QJ 2804A-2008 | |
