1.0.1 This code is formulated with view to making the design of municipal bridge comply with the requirements of safety and reliability, applicability and endurance, advanced technology, economy and rationality and environmental coordination.
1.0.2 This code is applicable to the design of newly-built permanent bridge and underpass on urban roads, and the design of those on town (village) roads.
1.0.3 The municipal bridge shall be designed following the principle of being conducive to resource conservation, environmental protection, flood control and rescue and earthquake relief based on the road class determined according to urban and rural planning and the development demand of urban traffic.
1.0.4 The design of municipal bridge shall not only meet the requirements stipulated in this code, but also comply with those in the current relevant ones of the nation.
2 Terms and Symbols
2.1 Terms
2.1.1 Reliability
The capacity of structure completing intended function under specified conditions within the specified time.
2.1.2 Degree of reliability
The probability of structure completing intended function under specified conditions within the specified time.
2.1.3 Design flood frequency
The monochronic average time interval of the flood of certain strength is adopted as the flood recurrence interval in the design, and its reciprocal is regarded as the flood frequency.
2.1.4 Design period
The time parameter selected to determine the value of variable action and time-dependent material performance during the structural reliability analysis.
2.1.5 Design working life
The service life for intended purpose of the structure or structural member without being overhauled, as specified in the design.
2.1.6 Action (load)
The concentrated force or distributed force (direct action, also known as load) imposed on structure and the cause for imposed deformation or constrained deformation (indirect action) of structure.
2.1.7 Permanent action
The action with the quantity not varying with time during the structure use period, or of which the variation may be neglected compared with the average.
2.1.8 Variable action
The action with the quantity varying with time during the structure use period, or of which the variation may not be neglected compared with the average.
2.1.9 Accidental action
The action with little occurrence probability during the structure use period, but once occurs, it will have a significant value and short duration.
2.1.10 Effect of action
The reaction of structure or structural member caused by action, such as internal force, deformation, crack and etc.
2.1.11 Combination for action effects
The random superposition of effects respectively generated by several actions on the structure or structural member.
2.1.12 Design situation
A group of physical conditions representing a certain time interval. The structure shall live up to not exceeding the related limit state in the design.
2.1.13 Limit state
A certain functional requirement specified in the design that the structure or member fails to meet when exceeding specific state, such state is the limit state of this function.
Foreword I
1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbols
3 Basic Requirements
4 Bridge Site Arrangement
5 Clearance above Bridge Deck
6 Horizontal Alignment, Vertical Alignment and Cross Section of Bridge Deck
7 Road Approach and Bridge Approach
8 Grade Separation Junction, Viaduct and Underpass
8.1 General Requirements
8.2 Grade Separation Junction and Viaduct
8.3 Underpass
9 Bridge Detail Structures and Attachments
9.1 Bridge Deck Pavement
9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
9.3 Bridge Expansion Joints
9.4 Bridge Bearing
9.5 Bridge Railing
9.6 Lighting, Energy Saving and Environmental Protection
9.7 Other Attachments
10 Loads on Bridge
Appendix A Special Loads and Structure Checking
Explanation of Wording in This Code
List of Quoted Standards
Standard
CJJ 11-2011 Code for design of the municipal bridge (English Version)
1.0.1 This code is formulated with view to making the design of municipal bridge comply with the requirements of safety and reliability, applicability and endurance, advanced technology, economy and rationality and environmental coordination.
1.0.2 This code is applicable to the design of newly-built permanent bridge and underpass on urban roads, and the design of those on town (village) roads.
1.0.3 The municipal bridge shall be designed following the principle of being conducive to resource conservation, environmental protection, flood control and rescue and earthquake relief based on the road class determined according to urban and rural planning and the development demand of urban traffic.
1.0.4 The design of municipal bridge shall not only meet the requirements stipulated in this code, but also comply with those in the current relevant ones of the nation.
2 Terms and Symbols
2.1 Terms
2.1.1 Reliability
The capacity of structure completing intended function under specified conditions within the specified time.
2.1.2 Degree of reliability
The probability of structure completing intended function under specified conditions within the specified time.
2.1.3 Design flood frequency
The monochronic average time interval of the flood of certain strength is adopted as the flood recurrence interval in the design, and its reciprocal is regarded as the flood frequency.
2.1.4 Design period
The time parameter selected to determine the value of variable action and time-dependent material performance during the structural reliability analysis.
2.1.5 Design working life
The service life for intended purpose of the structure or structural member without being overhauled, as specified in the design.
2.1.6 Action (load)
The concentrated force or distributed force (direct action, also known as load) imposed on structure and the cause for imposed deformation or constrained deformation (indirect action) of structure.
2.1.7 Permanent action
The action with the quantity not varying with time during the structure use period, or of which the variation may be neglected compared with the average.
2.1.8 Variable action
The action with the quantity varying with time during the structure use period, or of which the variation may not be neglected compared with the average.
2.1.9 Accidental action
The action with little occurrence probability during the structure use period, but once occurs, it will have a significant value and short duration.
2.1.10 Effect of action
The reaction of structure or structural member caused by action, such as internal force, deformation, crack and etc.
2.1.11 Combination for action effects
The random superposition of effects respectively generated by several actions on the structure or structural member.
2.1.12 Design situation
A group of physical conditions representing a certain time interval. The structure shall live up to not exceeding the related limit state in the design.
2.1.13 Limit state
A certain functional requirement specified in the design that the structure or member fails to meet when exceeding specific state, such state is the limit state of this function.
Contents of CJJ 11-2011
Foreword I
1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbols
3 Basic Requirements
4 Bridge Site Arrangement
5 Clearance above Bridge Deck
6 Horizontal Alignment, Vertical Alignment and Cross Section of Bridge Deck
7 Road Approach and Bridge Approach
8 Grade Separation Junction, Viaduct and Underpass
8.1 General Requirements
8.2 Grade Separation Junction and Viaduct
8.3 Underpass
9 Bridge Detail Structures and Attachments
9.1 Bridge Deck Pavement
9.2 Drainage and Waterproofing Design of Bridge Deck and Underpass
9.3 Bridge Expansion Joints
9.4 Bridge Bearing
9.5 Bridge Railing
9.6 Lighting, Energy Saving and Environmental Protection
9.7 Other Attachments
10 Loads on Bridge
Appendix A Special Loads and Structure Checking
Explanation of Wording in This Code
List of Quoted Standards
