Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
Testing Code of Operation for Security and Protection System
1 Scope
This standard specifies general requirements, inspection preparation, inspection and judgment, inspection result and report for operation testing of security and protection system.
This standard is applicable to inspection, evaluation, supervision and management of operation state of security and protection system in Beijing.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 17626.2-2006 Electromagnetic Compatibility（EMC） - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB 50198-94 Technical Code for Regulation of Civil Closed Circuit Monitoring TV System
GB 50348-2004 Technical Code for Engineering of Security and Protection System
3 Terms and Definitions
For the purposes of this document, the following term and definition apply.
operation testing
operation state inspection and quality evaluation for delivered security and protection system
4 General Requirements
4.1 Security and protection system inspection shall be implemented by statutory inspection organization.
4.2 Security and protection system of organization for which security and defense is important shall be inspected at least once every two years from the date it is put into service; security and protection system of other organization shall be inspected at least once every three years.
4.3 Necessary measures shall be taken during inspection to ensure the security protection function of system.
5 Inspection Preparation
5.1 Inspection body shall collect the following technical documents when accepting security protection inspection application: system contract, formal design document, system configuration block diagram, design and system change document, system contract equipment list, equipment change list, follow-up acceptance list for concealed work, inspection reports or certificates of main equipment and software, system test report and acceptance report, documents relevant to engineering maintenance, etc.
5.2 Inspection body shall check the conformance of technical documents to relevant national, professional and provincial standards, and determine the inspection implementation scheme jointly with the Client according to system document and relevant standards.
5.3 Inspection body shall prepare inspection implementation rules according to inspection implementation scheme and the content in Tables 1~8 of this standard.
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
5 Inspection Preparation
6 Inspection and Judgment
7 Inspection Result and Report
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
Testing Code of Operation for Security and Protection System
1 Scope
This standard specifies general requirements, inspection preparation, inspection and judgment, inspection result and report for operation testing of security and protection system.
This standard is applicable to inspection, evaluation, supervision and management of operation state of security and protection system in Beijing.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 17626.2-2006 Electromagnetic Compatibility（EMC） - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB 50198-94 Technical Code for Regulation of Civil Closed Circuit Monitoring TV System
GB 50348-2004 Technical Code for Engineering of Security and Protection System
3 Terms and Definitions
For the purposes of this document, the following term and definition apply.
operation testing
operation state inspection and quality evaluation for delivered security and protection system
4 General Requirements
4.1 Security and protection system inspection shall be implemented by statutory inspection organization.
4.2 Security and protection system of organization for which security and defense is important shall be inspected at least once every two years from the date it is put into service; security and protection system of other organization shall be inspected at least once every three years.
4.3 Necessary measures shall be taken during inspection to ensure the security protection function of system.
5 Inspection Preparation
5.1 Inspection body shall collect the following technical documents when accepting security protection inspection application: system contract, formal design document, system configuration block diagram, design and system change document, system contract equipment list, equipment change list, follow-up acceptance list for concealed work, inspection reports or certificates of main equipment and software, system test report and acceptance report, documents relevant to engineering maintenance, etc.
5.2 Inspection body shall check the conformance of technical documents to relevant national, professional and provincial standards, and determine the inspection implementation scheme jointly with the Client according to system document and relevant standards.
5.3 Inspection body shall prepare inspection implementation rules according to inspection implementation scheme and the content in Tables 1~8 of this standard.
Contents of DB11/T 779-2011
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
5 Inspection Preparation
6 Inspection and Judgment
7 Inspection Result and Report
