1 Scope
This standard specifies the requirements of research degree, type, control degree, working quality, feasibility evaluation and mineral resource/reserve estimate for copper, lead, zinc, silver, nickel and molybdenum mineral exploration.
This standard is applicable to the mineral exploration and mineral resource/reserve estimate of copper, lead, zinc, silver, nickel and molybdenum and the acceptance and approval of copper, lead, zinc, silver, nickel and molybdenum mineral exploration report; it may also serve as the criterion for mining right transfer, mining right assessment during mineral exploration & development funding, financing and stock exchange listing as well as mineral resource/reserve estimate.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to research whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 17766-1999 Classification for Resources/Reserves of Solid Fuels and Mineral Commodities
GB/T 13908-2002 General Requirements for Solid Mineral Exploration
3 Destination Task of Exploration
3.1 Preliminary Exploration
For regions with metallogenic prospect of copper, lead, zinc, silver, nickel and molybdenum, preliminarily predict the possible resource quantity through miscellaneous geological investigation, preliminary field observation and thimbleful engineering verification, and propose region with large mineralization potential for general exploration.
3.2 General Exploration
Carry out geological feasibility evaluation through effective technical works like geology, geophysical prospecting and geochemical prospecting as well as limited engineering verification and sampling test in regions or sections with larger mineralization potential, estimate the mineral resource quantity accordingly, propose the availability of further detailed exploration value and delimitate the range of detailed exploration area.
3.3 Detailed Exploration
Control the orebody in the detailed exploration area with various exploration methods, measures and systematic sampling engineering and estimate the mineral resource/reserve; evaluate whether industrial value is available through preliminary feasibility research, and delimitate the range of exploration area.
3.4 Prospecting
Search the mineral resource/reserve of orebody in exploration area through densifying various sampling engineering and adopting other technical methods; meanwhile, provide necessary geological information for feasibility evaluation, mining right transfer and mine construction design and submit relevant geological exploration report.
3.5 Exploration Sequence
Exploration shall be carried out according to sequence of project approval demonstration, design editing, implementation organization and report preparation.
4 Exploration Research Degree
Foreword I
1 Scope
2 Normative References
3 Destination Task of Exploration
3.1 Preliminary Exploration
3.2 General Exploration
3.3 Detailed Exploration
3.4 Prospecting
3.5 Exploration Sequence
4 Exploration Research Degree
4.1 Geological Research Degree
4.2 Ore Quality Research
4.3 Research on Technical Conditions of Ore Beneficiation (Metallurgy) and Processing
4.4 Research on Technical Conditions of Ore Deposit Mining
4.5 Comprehensive Exploration and Evaluation
5 Exploration Control Degree
5.1 Determination of Exploration Type
5.2 Determination of Exploratory Engineering Interval
5.3 Determination of Ore Deposit Control Degree
6 Quality Requirements for Exploration
6.1 Survey
6.2 Geological Investigation
6.3 Geophysical Prospecting and Geochemical Prospecting
6.4 Prospecting Engineering
6.5 Taking, Processing and Testing of Sample for Chemical Analysis
6.6 Collection and Test for Beneficiation (Metallurgy) Ore Sample
6.7 Collection and Test of Rock and Ore Sample for Physical Technical Performance
6.8 Original Catalog, Comprehensive Arrangement and Report Preparation
7 Feasibility Evaluation
7.1 Geological Research
7.2 Preliminary Feasibility Research
7.3 Feasibility Research
8 Classification for Mineral Resource/Reserve
8.1 Classification Criterion
8.2 Classification and Type
9 Mineral Resource/Reserve Estimate
9.1 Industrial Index of Mineral Resource/Reserve Estimate
9.2 General Principle for Mineral Resource/Reserve Estimate
9.3 Requirements for Determining Parameter of Resource/Reserve Estimate
9.4 Table for Classification Result of Mineral Resource/Reserve
Appendix A (Normative) Classification for Solid Mineral Resources/Reserves
Appendix B (Informative) Major Minerals: Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix C (Informative) Major Industrial Types of Ore Deposit: Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix D (Informative) Reference for Ore Deposit Exploration Type Conditions and Engineering Interval of Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix E (Informative) Examples Summary of Ore Deposit Exploration Type
Appendix F (Informative) Delineation of Orebody and Estimation Method of Mineral Resource/Reserve
F.1 Delineation and Connection of Orebody
F.2 Estimation Methods for Mineral Resource/Reserve
Appendix G (Informative) General Principles and Reference Indexes Established by Ore Deposit Industrial Index
G.1 General Principles Established by Ore Deposit Industrial Index
G.2 General Industry Indexes
Appendix H (Informative) Quality Standard for Concentrates of Copper, Lead, Zinc, Silver, Nickel and Molybdenum
H.1 Quality Standards for Copper Concentrate
H.2 Quality Standards for Lead Concentrate
H.3 Quality Standards for Zinc Concentrate
H.4 Quality Standards for Silver Concentrate
H.5 Quality Standards for Nickel Concentrate
H.6 Quality Standards for Molybdenum Concentrate
1 Scope
This standard specifies the requirements of research degree, type, control degree, working quality, feasibility evaluation and mineral resource/reserve estimate for copper, lead, zinc, silver, nickel and molybdenum mineral exploration.
This standard is applicable to the mineral exploration and mineral resource/reserve estimate of copper, lead, zinc, silver, nickel and molybdenum and the acceptance and approval of copper, lead, zinc, silver, nickel and molybdenum mineral exploration report; it may also serve as the criterion for mining right transfer, mining right assessment during mineral exploration & development funding, financing and stock exchange listing as well as mineral resource/reserve estimate.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to research whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 17766-1999 Classification for Resources/Reserves of Solid Fuels and Mineral Commodities
GB/T 13908-2002 General Requirements for Solid Mineral Exploration
3 Destination Task of Exploration
3.1 Preliminary Exploration
For regions with metallogenic prospect of copper, lead, zinc, silver, nickel and molybdenum, preliminarily predict the possible resource quantity through miscellaneous geological investigation, preliminary field observation and thimbleful engineering verification, and propose region with large mineralization potential for general exploration.
3.2 General Exploration
Carry out geological feasibility evaluation through effective technical works like geology, geophysical prospecting and geochemical prospecting as well as limited engineering verification and sampling test in regions or sections with larger mineralization potential, estimate the mineral resource quantity accordingly, propose the availability of further detailed exploration value and delimitate the range of detailed exploration area.
3.3 Detailed Exploration
Control the orebody in the detailed exploration area with various exploration methods, measures and systematic sampling engineering and estimate the mineral resource/reserve; evaluate whether industrial value is available through preliminary feasibility research, and delimitate the range of exploration area.
3.4 Prospecting
Search the mineral resource/reserve of orebody in exploration area through densifying various sampling engineering and adopting other technical methods; meanwhile, provide necessary geological information for feasibility evaluation, mining right transfer and mine construction design and submit relevant geological exploration report.
3.5 Exploration Sequence
Exploration shall be carried out according to sequence of project approval demonstration, design editing, implementation organization and report preparation.
4 Exploration Research Degree
Contents of DZ/T 0214-2002
Foreword I
1 Scope
2 Normative References
3 Destination Task of Exploration
3.1 Preliminary Exploration
3.2 General Exploration
3.3 Detailed Exploration
3.4 Prospecting
3.5 Exploration Sequence
4 Exploration Research Degree
4.1 Geological Research Degree
4.2 Ore Quality Research
4.3 Research on Technical Conditions of Ore Beneficiation (Metallurgy) and Processing
4.4 Research on Technical Conditions of Ore Deposit Mining
4.5 Comprehensive Exploration and Evaluation
5 Exploration Control Degree
5.1 Determination of Exploration Type
5.2 Determination of Exploratory Engineering Interval
5.3 Determination of Ore Deposit Control Degree
6 Quality Requirements for Exploration
6.1 Survey
6.2 Geological Investigation
6.3 Geophysical Prospecting and Geochemical Prospecting
6.4 Prospecting Engineering
6.5 Taking, Processing and Testing of Sample for Chemical Analysis
6.6 Collection and Test for Beneficiation (Metallurgy) Ore Sample
6.7 Collection and Test of Rock and Ore Sample for Physical Technical Performance
6.8 Original Catalog, Comprehensive Arrangement and Report Preparation
7 Feasibility Evaluation
7.1 Geological Research
7.2 Preliminary Feasibility Research
7.3 Feasibility Research
8 Classification for Mineral Resource/Reserve
8.1 Classification Criterion
8.2 Classification and Type
9 Mineral Resource/Reserve Estimate
9.1 Industrial Index of Mineral Resource/Reserve Estimate
9.2 General Principle for Mineral Resource/Reserve Estimate
9.3 Requirements for Determining Parameter of Resource/Reserve Estimate
9.4 Table for Classification Result of Mineral Resource/Reserve
Appendix A (Normative) Classification for Solid Mineral Resources/Reserves
Appendix B (Informative) Major Minerals: Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix C (Informative) Major Industrial Types of Ore Deposit: Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix D (Informative) Reference for Ore Deposit Exploration Type Conditions and Engineering Interval of Copper, Lead, Zinc, Silver, Nickel and Molybdenum
Appendix E (Informative) Examples Summary of Ore Deposit Exploration Type
Appendix F (Informative) Delineation of Orebody and Estimation Method of Mineral Resource/Reserve
F.1 Delineation and Connection of Orebody
F.2 Estimation Methods for Mineral Resource/Reserve
Appendix G (Informative) General Principles and Reference Indexes Established by Ore Deposit Industrial Index
G.1 General Principles Established by Ore Deposit Industrial Index
G.2 General Industry Indexes
Appendix H (Informative) Quality Standard for Concentrates of Copper, Lead, Zinc, Silver, Nickel and Molybdenum
H.1 Quality Standards for Copper Concentrate
H.2 Quality Standards for Lead Concentrate
H.3 Quality Standards for Zinc Concentrate
H.4 Quality Standards for Silver Concentrate
H.5 Quality Standards for Nickel Concentrate
H.6 Quality Standards for Molybdenum Concentrate
