Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is drafted in accordance with the rules given in the GB/T 1.1-2009.
This standard replaces FZ/T 24011-2010 Cashmere Woven Scarf and Shawl, and the following technical deviations have been made with respect to FZ/T 24011-2010 (the previous edition):
— modification of the Scope;
— modification of the Normative References; deletion of the references of GB/T 3921-2008, FZ/T 01048 and FZ/T 01053, and addition of the references of GB/T 12490-2014, GB/T 29862, GB 31701.
— addition of the requirements of cashmere woven scarfs and shawls for infants and children in safety requirements.
— modification of the assessment indexes for weight deviation rate of single product.
— addition of the mutual staining fastness in color fastness indexes.
— addition of the color fastness indexes of deep printing products.
— modification of the requirements and description of the defect degree of partial items of appearance defect and printing defect.
— modification of the names of partial printing defects.
— modification of the expression of test method of weight deviation rate for single product.
— modification of the test method of color fastness to washing.
— addition of the example in the instructions.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Subcommittee 9 on Cashmere of National Technical Committee 209 on Textiles of Standardization Administration of China (SAC/TC 209/SC 9).
The previous editions of this standard are as follows:
— FZ/T 24011-2010.
Cashmere Woven Scarf and Shawl
1 Scope
This standard specifies the technical requirements, inspection methods, inspection and acceptance rules, as well as instructions, packaging, transportation and storage of cashmere woven scarves and shawls.
This standard is applicable to the pure cashmere scarves and shawls, and scarves and shawls containing 30% or more of cashmere. Pure raw or blended scarves and shawls of other special animal fiber may be referred to this standard.
This standard is not applicable to ultra-thin cashmere scarves and shawls with the mass per unit area of 50 g/m2 or less.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles — Tests for Colour Fastness — Grey Scale for Assessing Change in Colour
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2910 (all parts) Textiles — Quantitative Chemical Analysis
GB/T 3920 Textiles — Tests for Color Fastness — Color Fastness to Rubbing
GB/T 3923.1 Textiles — Tensile Properties of Fabrics — Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for Use of Products of Consumer Interest — Instructions for Use of Textiles and Apparel
GB/T 5711 Textiles — Tests for Colour Fastness — Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 5713 Textiles — Tests for Color Fastness — Color Fastness to Water
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 8427-2008 Textiles — Tests for Color Fastness — Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8628 Textiles — Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change
GB/T 8629-2017 Textiles — Domestic Washing and Drying Procedures for Textile Testing
GB/T 9994 Conventional moisture regains of textile materials
GB/T 9995 Determination of Moisture Content and Moisture Regain of Textile — Oven-drying Method
GB/T 12490-2014 Textiles — Tests for Color Fastness — Color Fastness to Washing with Soap or Soap and Soda
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19981.2-2014 Textiles — Professional Care, Drycleaning and Wetcleaning of Fabrics and Garments — Part 2: Procedure for Testing Performance When Drycleaning and Finishing Using Tetrachloroethene
GB/T 29862 Textiles — Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
FZ/T 01026 Textiles — Quantitative Chemical Analysis — Mulitinary Fibre Mixtures
FZ/T 01057 (all parts) Test Method for Identification of Textile Fibers
3 Technical Requirements
Technical requirements include safety requirements, grading requirements, internal and external quality ratings.
3.1 Safety requirements
The basic safety technical requirements for cashmere woven scarves and shawls at least shall be comply with the requirements of Class B products specified in GB 18401. The basic safety performance of cashmere woven scarves and shawls for infants shall comply with the requirements of Class A products specified in GB 31701, and the basic safety performance of cashmere woven scarves and shawls for children at least shall be comply with the requirements of Class B products specified in GB 31701.
3.2 Grading requirements
Cashmere woven scarves and shawls shall be graded by piece and divided into first-grade products and acceptable products according to the lowest results of internal and external quality inspection.
3.3 Internal quality
3.3.1 Physical indexes are graded in accordance with Table 1.
Table 1
Item Unit Combed Carded
First-grade product Acceptable product First-grade product Acceptable product
Dimensional stability to washing % +3.0 to -2.0 +4.0 to -2.5 +4.0 to -2.0 +5.0 to -3.0
Dimensional stability to dry cleaning % +2.0 to -2.0 +3.0 to -2.0 +2.5 to -3.5 +2.5 to -4.5
Weight deviation rate of single product % -5 to +5 -7 to +7 -5 to +5 -7 to +7
Warp breaking strength N ≥100 ≥70
Fiber content deviation % In accordance with the requirements of GB/T 29862
Note 1: The dimensional stability shall be assessed according to the items indicated on the instructions. For products indicated washable or dry-cleaned, the dimensional stability to washing may be assessed only.
Note 2: Semi-combed products shall be assessed as combed products.
Note 3: The breaking strength of the special products, such as combed and semi-combed 60 Nm/2 or above thin and loose structure, shall be in accordance with the contract requirements.
3.3.2 Color fastness ratings are graded in accordance with Table 2.
Table 2
In grades
Item Limit First-grade product Acceptable product
Color fastness to light Change in color Light color ≥ 3 to 4 3
Dark color 4 3
Color fastness to washing Change in color ≥ 4 3 to 4
Staining 3 to 4 3
Color fastness to water Change in color ≥ 4 3 to 4
Staining 3 to 4 (dark printing 3) 3
Color fastness to dry cleaning Change in color ≥ 4 to 5 (dark printing 4) 4
Staining 4 (dark printing 3 to 4) 3 to 4 (dark printing 3)
Color fastness to dry rubbing Staining Light color ≥ 3 to 4 3
Dark color 3 3
Color fastness to wet rubbing Staining Light color ≥ 3 to 4 3
Dark color 3 2 to 3
Mutual staining fastness ≥ 3 3
Note 1: In accordance with the requirements specified in GB/T 4841.3: the color > 1/12 standard depth is dark, while that ≤ 1/12 is light.
Note 2: The color fastness to washing and the dimensional stability to washing of products marked as “unwashable” on the instructions are not assessed.
Note 3: The color fastness to dry cleaning and the dimensional stability to dry cleaning of products marked as “non-dry cleaning” on the instructions are not assessed.
3.4 Appearance quality
3.4.1 Permissible deviation of specifications and sizes
See Table 3 for the permissible deviation of specifications and sizes.
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Inspection Methods
5 Inspection and Acceptance Rules
6 Instructions, Packaging, Transportation and Storage
Annex A (Normative) Description of Printing Appearance Defect
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is drafted in accordance with the rules given in the GB/T 1.1-2009.
This standard replaces FZ/T 24011-2010 Cashmere Woven Scarf and Shawl, and the following technical deviations have been made with respect to FZ/T 24011-2010 (the previous edition):
— modification of the Scope;
— modification of the Normative References; deletion of the references of GB/T 3921-2008, FZ/T 01048 and FZ/T 01053, and addition of the references of GB/T 12490-2014, GB/T 29862, GB 31701.
— addition of the requirements of cashmere woven scarfs and shawls for infants and children in safety requirements.
— modification of the assessment indexes for weight deviation rate of single product.
— addition of the mutual staining fastness in color fastness indexes.
— addition of the color fastness indexes of deep printing products.
— modification of the requirements and description of the defect degree of partial items of appearance defect and printing defect.
— modification of the names of partial printing defects.
— modification of the expression of test method of weight deviation rate for single product.
— modification of the test method of color fastness to washing.
— addition of the example in the instructions.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Subcommittee 9 on Cashmere of National Technical Committee 209 on Textiles of Standardization Administration of China (SAC/TC 209/SC 9).
The previous editions of this standard are as follows:
— FZ/T 24011-2010.
Cashmere Woven Scarf and Shawl
1 Scope
This standard specifies the technical requirements, inspection methods, inspection and acceptance rules, as well as instructions, packaging, transportation and storage of cashmere woven scarves and shawls.
This standard is applicable to the pure cashmere scarves and shawls, and scarves and shawls containing 30% or more of cashmere. Pure raw or blended scarves and shawls of other special animal fiber may be referred to this standard.
This standard is not applicable to ultra-thin cashmere scarves and shawls with the mass per unit area of 50 g/m2 or less.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles — Tests for Colour Fastness — Grey Scale for Assessing Change in Colour
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2910 (all parts) Textiles — Quantitative Chemical Analysis
GB/T 3920 Textiles — Tests for Color Fastness — Color Fastness to Rubbing
GB/T 3923.1 Textiles — Tensile Properties of Fabrics — Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for Use of Products of Consumer Interest — Instructions for Use of Textiles and Apparel
GB/T 5711 Textiles — Tests for Colour Fastness — Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 5713 Textiles — Tests for Color Fastness — Color Fastness to Water
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 8427-2008 Textiles — Tests for Color Fastness — Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8628 Textiles — Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change
GB/T 8629-2017 Textiles — Domestic Washing and Drying Procedures for Textile Testing
GB/T 9994 Conventional moisture regains of textile materials
GB/T 9995 Determination of Moisture Content and Moisture Regain of Textile — Oven-drying Method
GB/T 12490-2014 Textiles — Tests for Color Fastness — Color Fastness to Washing with Soap or Soap and Soda
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19981.2-2014 Textiles — Professional Care, Drycleaning and Wetcleaning of Fabrics and Garments — Part 2: Procedure for Testing Performance When Drycleaning and Finishing Using Tetrachloroethene
GB/T 29862 Textiles — Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
FZ/T 01026 Textiles — Quantitative Chemical Analysis — Mulitinary Fibre Mixtures
FZ/T 01057 (all parts) Test Method for Identification of Textile Fibers
3 Technical Requirements
Technical requirements include safety requirements, grading requirements, internal and external quality ratings.
3.1 Safety requirements
The basic safety technical requirements for cashmere woven scarves and shawls at least shall be comply with the requirements of Class B products specified in GB 18401. The basic safety performance of cashmere woven scarves and shawls for infants shall comply with the requirements of Class A products specified in GB 31701, and the basic safety performance of cashmere woven scarves and shawls for children at least shall be comply with the requirements of Class B products specified in GB 31701.
3.2 Grading requirements
Cashmere woven scarves and shawls shall be graded by piece and divided into first-grade products and acceptable products according to the lowest results of internal and external quality inspection.
3.3 Internal quality
3.3.1 Physical indexes are graded in accordance with Table 1.
Table 1
Item Unit Combed Carded
First-grade product Acceptable product First-grade product Acceptable product
Dimensional stability to washing % +3.0 to -2.0 +4.0 to -2.5 +4.0 to -2.0 +5.0 to -3.0
Dimensional stability to dry cleaning % +2.0 to -2.0 +3.0 to -2.0 +2.5 to -3.5 +2.5 to -4.5
Weight deviation rate of single product % -5 to +5 -7 to +7 -5 to +5 -7 to +7
Warp breaking strength N ≥100 ≥70
Fiber content deviation % In accordance with the requirements of GB/T 29862
Note 1: The dimensional stability shall be assessed according to the items indicated on the instructions. For products indicated washable or dry-cleaned, the dimensional stability to washing may be assessed only.
Note 2: Semi-combed products shall be assessed as combed products.
Note 3: The breaking strength of the special products, such as combed and semi-combed 60 Nm/2 or above thin and loose structure, shall be in accordance with the contract requirements.
3.3.2 Color fastness ratings are graded in accordance with Table 2.
Table 2
In grades
Item Limit First-grade product Acceptable product
Color fastness to light Change in color Light color ≥ 3 to 4 3
Dark color 4 3
Color fastness to washing Change in color ≥ 4 3 to 4
Staining 3 to 4 3
Color fastness to water Change in color ≥ 4 3 to 4
Staining 3 to 4 (dark printing 3) 3
Color fastness to dry cleaning Change in color ≥ 4 to 5 (dark printing 4) 4
Staining 4 (dark printing 3 to 4) 3 to 4 (dark printing 3)
Color fastness to dry rubbing Staining Light color ≥ 3 to 4 3
Dark color 3 3
Color fastness to wet rubbing Staining Light color ≥ 3 to 4 3
Dark color 3 2 to 3
Mutual staining fastness ≥ 3 3
Note 1: In accordance with the requirements specified in GB/T 4841.3: the color > 1/12 standard depth is dark, while that ≤ 1/12 is light.
Note 2: The color fastness to washing and the dimensional stability to washing of products marked as “unwashable” on the instructions are not assessed.
Note 3: The color fastness to dry cleaning and the dimensional stability to dry cleaning of products marked as “non-dry cleaning” on the instructions are not assessed.
3.4 Appearance quality
3.4.1 Permissible deviation of specifications and sizes
See Table 3 for the permissible deviation of specifications and sizes.
Contents of FZ/T 24011-2019
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Inspection Methods
5 Inspection and Acceptance Rules
6 Instructions, Packaging, Transportation and Storage
Annex A (Normative) Description of Printing Appearance Defect
