Codeofchina.com is in charge of this English translation. In case of any doubt about the contents of English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces “Hosiery” (FZ/T 73001-2008), the following technical changes have been made with respect to FZ/T 73001-2008:
——The application scope is modified (Chapter 1 of this edition and Chapter 1 of 2008 edition);
——Standard introduction in normative references is adjusted (Chapter 2 of this standard and Chapter 2 of 2008 edition);
——Terms in the former standard are deleted, the terms of hosiery size, nonelastic hosiery, elastic hosiery with heel, elastic hosiery without heel, elastic hosiery without setting, hosiery with single layer bottom and hosiery with reinforced bottom are added (see Chapter 3 of this standard and Chapter 3 of 2008 edition);
——The product classification content is modified, and the classification of ankle hosiery, heel-fixed pantyhose, pantyhose with heel and open-toe pantyhose is defined (see 2008 edition);
——The illustration of "ankle hosiery" is added (see Figure 2);
——"Size and total length tolerance, welt height tolerance and welt width tolerance" and other relevant contents are deleted (see 5.3.1.2 of this standard and 5.3.1.2 of 2008 edition);
——The start and stop hosiery sizes in the table of "size and tolerance" are adjusted, and some sole lengths are adjusted (see 5.3.1.2 of this standard and 5.3.1.2 of 2008 edition);
——The requirements of "size and tolerance" are modified, and Tables 1-6 in the former standard are integrated into Tables 1-3 in this standard (see 5.3.1.2 of this standard; 5.3.1.2 of 2008 edition);
——"Assessment indexes for welt width tolerance of elastic hosiery without heel" is adjusted (see Table 3 of this standard; Table 4 of 2008 edition);
——"Table 7: Grading Requirements" in the former standard is deleted (5.3.2 of 2008 edition);
——"Some surface defects" are adjusted and added (see 5.3.2 of this standard; 5.3.3 of 2008 edition);
——"Assessment indexes of weft-wide and warp-wide stretching values and tolerance" in the former standard is modified, corresponding note is added, and Tables 9-15 in the former standard are integrated into Tables 5-7 in this standard (see 5.41 of this standard; 5.4.1.1 of 2008 edition);
——Table 17 "Requirements of Inherent Quality Grading" in the former standard is adjusted, and Tables 16-17 in the former standard are integrated into Table 8 in this standard (see Table 8 of this standard; Table 16 and Table 17 of 2008 edition);
——The text description of "boot weft-wide stretching position and sole warp-wide stretching position of hosiery with heel" is adjusted (see “b” and “c” in 6.4.1.2.1 of this standard; “b” and “c” in 6.4.2.2.1 of 2008 edition);
——"Schematic Diagram for Clamping Position of Sole of Hosiery with Heel" is added (see Figure 5);
——The test description of "lower hose weft-wide stretching position, crotch warp-wide stretching position and leg length warp-wide stretching position of pantyhose" is modified (see “d” “e” “f” in 6.4.1.2.3 of this standard; “d” “e” “f” in 6.4.2.2.3 of 2008 edition);
——The hosiery type for "standard tension and expansion tension tests" is modified (see 6.4.1.3.1 of this standard; 6.4.2.3.1 of 2008 edition);
——The description of "warp-wide stretching test for sole length of cotton/core-spun spandex yarn mixed (thick) socks" is deleted (see 6.4.2.3.2 of 2008 edition);
——The judgment rules of "warp-wide and weft-wide stretching values" are modified (see 7.2.1 of this standard; 7.1.2.1 of 2008 edition);
——"Sampling position of fiber content" is modified (see 6.4.3 of this standard; 6.4.4 of 2008 edition);
——The expression method of "specification mark" is adjusted (see 8.1.2 of this standard; 8.1.5 of 2008 edition).
This standard is proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Technical Subcommittee on Knitwear of the Technical Committee on Textiles of Standardization Administration of China (SAC/TC 209/SC 6).
The previous editions of the standard replaced by this standard are as follows:
The first edition was issued in 1991; the second revision was issued in 2004; the third revision was issued in 2008.
Hosiery
1 Scope
This standard specifies the terms and definitions, product classification, requirements, inspection rules, judgment rules, product instruction, packaging, transportation and storage of hosiery.
This standard is applicable to appraise the quality of men's and women's hosieries. It is not applicable to pressure hosieries, warp-knitted hosieries, athletic hosieries, run resistant hosieries, etc.
This standard is not applicable to the hosieries for infants and young children of 36 months or below.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 2910 (All Parts) Textiles - Quantitative Chemical Analysis
GB/T 2912.1 Textiles-Determination of Formaldehyde-Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 3921-2008 Textiles-Tests for Colour Fastness-Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles-Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 4856 Package of Cotton Goods and Knitwear
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5713 Textiles - Tests for Colour Fastness - Colour Fastness to Water
GB/T 7573 Textiles - Determination of pH of the Aqueous Extract
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18401 National General Safety Technical Code for Textile Products
GB/T 29862 Textiles - Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
FZ/T 01026 Textiles - Quantitative Chemical Analysis - Quaternary Fibre Mixtures
FZ/T 01057 (All Parts) Test Method for Identification of Textile Fibres
FZ/T 01095 Textile - Test Method of Elastane Fibrer Content
FZ/T 01101 Textile Test Method - Fiber Content - Quantitative Physical Analysis
FZ/T 30003 Method for Quantitative Analysis of Ramie (Flax Hemp) Cotton Blended Textile-Micro Projection
GSB 16-2159 Knitwear Standard Depth Scale (1/12)
GSB 16-2610 Defect Appearance Replicas of Hosiery
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
hosiery size
length of human foot sole expressed in centimeter (cm), applied as a basis for the design of hosiery sole length
3.2
nonelastic hosiery
hosiery with heel (woven heel), not containing elastic fiber (except welt), e.g. pure cotton hosiery
3.3
elastic hosiery with heel
hosiery with heel (woven heel), containing elastic fiber (except welt), e.g. core-spun spandex yarn mixed socks and elastic nylon yarn mixed socks
3.4
elastic hosiery without heel
hosiery without heel, containing elastic fiber, e.g. elastic sock panel, high sock, stocking, pantyhose
3.5
elastic hosiery without setting
elastic hosiery without heel, not subjected to setting
3.6
hosiery with single layer bottom
hosiery whose sole is not reinforced
3.7
hosiery with reinforced bottom
hosiery whose sole is reinforced
4 Product Classification
4.1 By application of elastic fiber, hosieries are classified into nonelastic hosiery and elastic hosiery (elastic hosiery with heel, elastic hosiery without heel).
4.2 By product styles, hosieries are classified into hosiery with heel (including ankle hosiery) and hosiery without heel (including sock panel, high sock, stocking, pantyhose); heel-fixed pantyhose, pantyhose with heel and open-toe pantyhose belong to pantyhose category.
5 Requirements
5.1 Details
The requirements are specified in the two aspects: appearance quality and inherent quality. The appearance quality involves size, tolerance (not applicable to elastic hosiery with heel), surface defect and sewing. Inherent quality includes the indexes of formaldehyde content, pH value, odor, decomposable carcinogenic aromatic amine dyes, fiber content, colour fastness to water, colour fastness to perspiration, colour fastness to rubbing, colour fastness to soaping, weft-wide stretching value and warp-wide stretching value, etc.
5.2 Grading
5.2.1 In purpose of quality grading, hosieries in pairs (pieces) are graded as first-grade product and acceptable product.
5.2.2 Hosiery is graded by batch in inherent quality and by piece in appearance quality, and the final grade is determined according to the combination of the two means above (whichever is lower).
5.3 Appearance quality
5.3.1 Size and tolerance
5.3.1.1 See Figure 1 ~ Figure 4 for the parts of hosiery.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Inspection Rules
7 Judgment Rules
8 Product Instruction, Packaging, Transportation and Storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the contents of English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces “Hosiery” (FZ/T 73001-2008), the following technical changes have been made with respect to FZ/T 73001-2008:
——The application scope is modified (Chapter 1 of this edition and Chapter 1 of 2008 edition);
——Standard introduction in normative references is adjusted (Chapter 2 of this standard and Chapter 2 of 2008 edition);
——Terms in the former standard are deleted, the terms of hosiery size, nonelastic hosiery, elastic hosiery with heel, elastic hosiery without heel, elastic hosiery without setting, hosiery with single layer bottom and hosiery with reinforced bottom are added (see Chapter 3 of this standard and Chapter 3 of 2008 edition);
——The product classification content is modified, and the classification of ankle hosiery, heel-fixed pantyhose, pantyhose with heel and open-toe pantyhose is defined (see 2008 edition);
——The illustration of "ankle hosiery" is added (see Figure 2);
——"Size and total length tolerance, welt height tolerance and welt width tolerance" and other relevant contents are deleted (see 5.3.1.2 of this standard and 5.3.1.2 of 2008 edition);
——The start and stop hosiery sizes in the table of "size and tolerance" are adjusted, and some sole lengths are adjusted (see 5.3.1.2 of this standard and 5.3.1.2 of 2008 edition);
——The requirements of "size and tolerance" are modified, and Tables 1-6 in the former standard are integrated into Tables 1-3 in this standard (see 5.3.1.2 of this standard; 5.3.1.2 of 2008 edition);
——"Assessment indexes for welt width tolerance of elastic hosiery without heel" is adjusted (see Table 3 of this standard; Table 4 of 2008 edition);
——"Table 7: Grading Requirements" in the former standard is deleted (5.3.2 of 2008 edition);
——"Some surface defects" are adjusted and added (see 5.3.2 of this standard; 5.3.3 of 2008 edition);
——"Assessment indexes of weft-wide and warp-wide stretching values and tolerance" in the former standard is modified, corresponding note is added, and Tables 9-15 in the former standard are integrated into Tables 5-7 in this standard (see 5.41 of this standard; 5.4.1.1 of 2008 edition);
——Table 17 "Requirements of Inherent Quality Grading" in the former standard is adjusted, and Tables 16-17 in the former standard are integrated into Table 8 in this standard (see Table 8 of this standard; Table 16 and Table 17 of 2008 edition);
——The text description of "boot weft-wide stretching position and sole warp-wide stretching position of hosiery with heel" is adjusted (see “b” and “c” in 6.4.1.2.1 of this standard; “b” and “c” in 6.4.2.2.1 of 2008 edition);
——"Schematic Diagram for Clamping Position of Sole of Hosiery with Heel" is added (see Figure 5);
——The test description of "lower hose weft-wide stretching position, crotch warp-wide stretching position and leg length warp-wide stretching position of pantyhose" is modified (see “d” “e” “f” in 6.4.1.2.3 of this standard; “d” “e” “f” in 6.4.2.2.3 of 2008 edition);
——The hosiery type for "standard tension and expansion tension tests" is modified (see 6.4.1.3.1 of this standard; 6.4.2.3.1 of 2008 edition);
——The description of "warp-wide stretching test for sole length of cotton/core-spun spandex yarn mixed (thick) socks" is deleted (see 6.4.2.3.2 of 2008 edition);
——The judgment rules of "warp-wide and weft-wide stretching values" are modified (see 7.2.1 of this standard; 7.1.2.1 of 2008 edition);
——"Sampling position of fiber content" is modified (see 6.4.3 of this standard; 6.4.4 of 2008 edition);
——The expression method of "specification mark" is adjusted (see 8.1.2 of this standard; 8.1.5 of 2008 edition).
This standard is proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Technical Subcommittee on Knitwear of the Technical Committee on Textiles of Standardization Administration of China (SAC/TC 209/SC 6).
The previous editions of the standard replaced by this standard are as follows:
The first edition was issued in 1991; the second revision was issued in 2004; the third revision was issued in 2008.
Hosiery
1 Scope
This standard specifies the terms and definitions, product classification, requirements, inspection rules, judgment rules, product instruction, packaging, transportation and storage of hosiery.
This standard is applicable to appraise the quality of men's and women's hosieries. It is not applicable to pressure hosieries, warp-knitted hosieries, athletic hosieries, run resistant hosieries, etc.
This standard is not applicable to the hosieries for infants and young children of 36 months or below.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 2910 (All Parts) Textiles - Quantitative Chemical Analysis
GB/T 2912.1 Textiles-Determination of Formaldehyde-Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 3921-2008 Textiles-Tests for Colour Fastness-Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles-Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 4856 Package of Cotton Goods and Knitwear
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5713 Textiles - Tests for Colour Fastness - Colour Fastness to Water
GB/T 7573 Textiles - Determination of pH of the Aqueous Extract
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18401 National General Safety Technical Code for Textile Products
GB/T 29862 Textiles - Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
FZ/T 01026 Textiles - Quantitative Chemical Analysis - Quaternary Fibre Mixtures
FZ/T 01057 (All Parts) Test Method for Identification of Textile Fibres
FZ/T 01095 Textile - Test Method of Elastane Fibrer Content
FZ/T 01101 Textile Test Method - Fiber Content - Quantitative Physical Analysis
FZ/T 30003 Method for Quantitative Analysis of Ramie (Flax Hemp) Cotton Blended Textile-Micro Projection
GSB 16-2159 Knitwear Standard Depth Scale (1/12)
GSB 16-2610 Defect Appearance Replicas of Hosiery
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
hosiery size
length of human foot sole expressed in centimeter (cm), applied as a basis for the design of hosiery sole length
3.2
nonelastic hosiery
hosiery with heel (woven heel), not containing elastic fiber (except welt), e.g. pure cotton hosiery
3.3
elastic hosiery with heel
hosiery with heel (woven heel), containing elastic fiber (except welt), e.g. core-spun spandex yarn mixed socks and elastic nylon yarn mixed socks
3.4
elastic hosiery without heel
hosiery without heel, containing elastic fiber, e.g. elastic sock panel, high sock, stocking, pantyhose
3.5
elastic hosiery without setting
elastic hosiery without heel, not subjected to setting
3.6
hosiery with single layer bottom
hosiery whose sole is not reinforced
3.7
hosiery with reinforced bottom
hosiery whose sole is reinforced
4 Product Classification
4.1 By application of elastic fiber, hosieries are classified into nonelastic hosiery and elastic hosiery (elastic hosiery with heel, elastic hosiery without heel).
4.2 By product styles, hosieries are classified into hosiery with heel (including ankle hosiery) and hosiery without heel (including sock panel, high sock, stocking, pantyhose); heel-fixed pantyhose, pantyhose with heel and open-toe pantyhose belong to pantyhose category.
5 Requirements
5.1 Details
The requirements are specified in the two aspects: appearance quality and inherent quality. The appearance quality involves size, tolerance (not applicable to elastic hosiery with heel), surface defect and sewing. Inherent quality includes the indexes of formaldehyde content, pH value, odor, decomposable carcinogenic aromatic amine dyes, fiber content, colour fastness to water, colour fastness to perspiration, colour fastness to rubbing, colour fastness to soaping, weft-wide stretching value and warp-wide stretching value, etc.
5.2 Grading
5.2.1 In purpose of quality grading, hosieries in pairs (pieces) are graded as first-grade product and acceptable product.
5.2.2 Hosiery is graded by batch in inherent quality and by piece in appearance quality, and the final grade is determined according to the combination of the two means above (whichever is lower).
5.3 Appearance quality
5.3.1 Size and tolerance
5.3.1.1 See Figure 1 ~ Figure 4 for the parts of hosiery.
Contents of FZ/T 73001-2016
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Inspection Rules
7 Judgment Rules
8 Product Instruction, Packaging, Transportation and Storage
