Standard No.:	GB 10395.1-2025
English Name:	Agricultural machinery—Safety—Part 1: General requirements
Chinese Name:	农业机械 安全 第1部分： 总则
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR;SAC
Issued on:	2025-12-02
Implemented on:	2026-11-1
Status:	to be valid
Superseding:	GB 10395.1-2009 Agricultural and forestry machinery—Safety—Part 1:General requirements
Target Language:	English
File Format:	PDF
Word Count:	18500 words
Translation Price(USD):	555.0
Delivery:	via email in 1~5 business day

GB 10395.1-2025 Agricultural machinery—Safety—Part 1: General requirements English, Anglais, Englisch, Inglés, えいご This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered. ICS CCS H National Standard of the People's Republic of China ‌GB 10395.1-2025 Replaces GB 10395.1-2009 Agricultural machinery - Safety - Part 1: General requirements 农业机械 安全 第1部分： 总则 Issue date: 2025-12-02 Implementation date: 2027-01-01 Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China the Standardization Administration of the People's Republic of China Contents Foreword 1 Scope 2 Normative References 3 Terms and Definitions 4 Classification 5 Quality Requirements 6 Test Methods 7 Inspection Rules 8 Labeling and Marking 9 Packaging, Storage and Transport 1 Scope This document specifies safety requirements for the design and manufacture of self-propelled, mounted, semi-mounted and trailed agricultural machinery, and describes the corresponding verification methods for these safety requirements. This document specifies the type of safety operating information (including information on residual risks) to be provided by the manufacturer. This document identifies significant hazards, hazardous situations and hazardous events (see Appendix A) for agricultural machinery during normal operation and maintenance when used as intended and under conditions of foreseeable misuse by the manufacturer. This document applies to the design, manufacture, inspection and testing of self-propelled, mounted, semi-mounted and trailed agricultural machinery. This document does not apply to the following agricultural machinery: — Agricultural and forestry tractors; — Agricultural aircraft and hovercraft; — Lawn and garden machinery; — Machine-specific components or functions (e.g., working tools and/or working processes); — Machinery with specific performance levels. This document does not cover hazards associated with periodic service, machine replacement and repair carried out by professional service personnel, nor hazards related to environmental dangers, road safety (e.g., steering, braking), or power take-off (PTO) universal joint drive shafts; it also does not cover guards for power transmission moving parts (except for strength requirements of guards and barriers). 2 Normative References The following documents contain provisions that, through normative reference in this text, constitute essential provisions of this document. For dated references, only the edition corresponding to that date applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 3766 Hydraulic fluid power — General rules and safety requirements for systems and their components GB/T 3767-2016 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane GB/T 4269.1 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols GB/T 4269.2 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery GB/T 6235 Agricultural tractors — Dimensions of operator's seat reference point GB/T 7932 Pneumatic fluid power — General rules and safety requirements for systems and their components GB/T 9480 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Rules for the preparation of instruction handbooks GB 10396 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles GB/T 10910 Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator GB/T 15706-2012 Safety of machinery — General principles for design — Risk assessment and risk reduction GB/T 16404 (all parts) Acoustics — Determination of sound power levels of noise sources using sound intensity GB/T 16754 Safety of machinery — Emergency stop function — Principles for design GB/T 16855.1 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design GB/T 16855.2 Safety of machinery — Safety-related parts of control systems — Part 2: Validation GB/T 17248.2-2018 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections GB/T 17248.5-2018 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections GB/T 20341 Agricultural tractors and self-propelled machines — Operator controls — Actuating forces, directions, locations and methods GB/T 20953 Tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials for operator enclosures GB/T 21398 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria GB/T 23821-2022 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs GB/T 25078.1 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning GB/T 33641.1 Agricultural tractors and machinery — Seat belts — Part 1: Anchorage location requirements GB/T 33641.2 Agricultural and forestry tractors and machinery — Seat belts — Part 2: Anchorage strength requirements GB/T 33641.3 Agricultural and forestry tractors and machinery — Seat belts — Part 3: Assembly requirements GB/T 38874.1 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development GB/T 38874.2 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase GB/T 38874.3 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development for hardware and software GB/T 38874.4 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes GB/T 39521 Agricultural tractors and machinery — Automatic guidance systems for tractors and self-propelled machines — Safety requirements GB/T 41603.1 Self-propelled agricultural machinery — Stability assessment — Part 1: Principles 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB/T 15706-2012 and the following apply. 3.1 normal operation Use of the machine by an operator familiar with its characteristics, in accordance with the operating information and safety instructions provided in the manufacturer's instruction handbook and on the machine, to achieve the intended use as defined by the manufacturer. Note: Normal operation includes machine preparation and storage, such as: — mounting and dismounting; — swinging components into or out of the working position; — adding or removing ballast and attaching or detaching accessories; — loading items and materials required and consumed during machine use (e.g., twine rolls, seed, fertilizer, water and pesticides); — adjusting and setting the machine, or coupling the tractor and machine for specific field and/or crop conditions; — clearing crop blockages or accumulated debris. 3.2 service Operations carried out as needed and/or periodically by personnel familiar with the machine's characteristics, in accordance with the service information and safety instructions provided in the manufacturer's instruction handbook and on the machine, to maintain the machine's normal function. Note: Service includes operations such as refuelling, cleaning, washing, filling of operating fluids, lubrication, adjustment (e.g., belt and chain adjustment), and replacement of consumables like bulbs and wearing parts (e.g., cutting parts). 3.3 three-point contact A system enabling a person to simultaneously use both hands and one foot, or both feet and one hand, when getting on/off the machine or when dismounting machine components. 3.4 inadvertent contact Accidental exposure of a person to a hazard caused by their own actions during normal operation and service of the machine. 3.5 hand reach A spherical zone with a radius of 1000 mm, formed by the position of the hand on the seat centreline as defined by the seat index point (SIP) specified in GB/T 6236 and the interior area of the cab (if present). Note 1: For machines without a cab, the hand reach zone is a sphere with a radius of 1000 mm, centered at a point located 60 mm forward and 580 mm above the seat index point (SIP) as defined in GB/T 6236, on the seat centreline, see Figure 1. Note 2: For machines with a cab, the hand reach zone is inside the cab, a sphere with a radius of 1000 mm, centered at a point located 60 mm forward and 580 mm above the seat index point (SIP) as defined in GB/T 6236, on the seat centreline. 3.6 foot reach A downward-extending hemispherical zone with a radius of 800 mm, formed by the position of the foot on the seat centreline as defined by the seat index point (SIP) specified in GB/T 6236 and the interior area of the cab (if present). Note 1: For machines without a cab, the foot reach zone is a downward hemisphere with a radius of 800 mm, centered at the intersection of the seat centreline and the front edge of the seat cushion, with the seat in its mid-position, see Figure 1.