Standard No.:	GB 12367-2025
English Name:	Safety specification for electrostatic paint spraying
Chinese Name:	静电喷漆安全规范
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR; SAC
Issued on:	2025-10-31
Implemented on:	2026-8-1
Status:	to be valid
Superseding:	GB 12367-2006 Safety code for painting - Safety for electrostatic spray painting process
Target Language:	English
File Format:	PDF
Word Count:	8500 words
Translation Price(USD):	255.0
Delivery:	via email in 1~3 business day

This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered. ICS 13.100 CCS C 67 National Standard of the People’s Republic of China GB 12367-2025 Replaces GB 12367-2006 Safety specification for electrostatic paint spraying 喷漆室安全技术要求 Issue date: 2025-10-31 Implementation date: 2026-08-01 Issued by the State Administration for Market Regulation of the People's Republic of China the Standardization Administration of the People's Republic of China Safety specification for electrostatic paint spraying 1 Scope This document specifies the safety technical requirements for electrostatic paint spraying, including general requirements, equipment and facilities, electrical and automatic control systems, ventilation systems, storage and transportation of coatings, operational and maintenance safety management, and describes the verification methods. This document applies to the design, use, maintenance, and safety management of electrostatic spraying processes and their equipment using combustible and flammable liquid coatings. 2 Normative References The contents of the following documents constitute essential provisions of this document through normative reference in the text. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB 2894 Safety colours and safety signs GB 3836.15 Explosive atmospheres - Part 15: Design, selection and erection of electrical installations GB 6514 Safety code for painting - Safety of painting process and its ventilation GB 11291.2 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration GB 12158 General guidance for preventing electrostatic accidents GB/T 14441 Terminology of safety for painting GB 14444 Safety technical requirements for spray booths GB 14773 Safety technical requirements for hand-held electrostatic spraying guns and associated apparatus GB 50058 Code for design of electrical installations in explosive atmospheres GB 50116 Code for design of automatic fire alarm system GB 50140 Code for design of fire extinguisher distribution in buildings GBZ 2.1 Occupational exposure limits for hazardous agents in the workplace-Part 1: Chemical hazardous agents TSG 21 Safety and Technical Supervision Regulation for Stationary Pressure Vessels TSG D0001 Safety and Technical Supervision Regulation for Pressure Piping-Industrial Piping 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB/T 14441 and the following apply. 3.1 electrostatic paint spraying a coating method where atomized liquid coating material is charged or polarized under the action of a high-voltage electric field and adheres to the substrate surface. [Source: GB/T 14441-2024, 6.1.11, modified] 3.2 working area for electrostatic paint spraying an area where a certain quantity of flammable or combustible vapors, paint mist, or accumulations of combustible residues exist due to electrostatic paint spraying operations. 3.3 electrostatic atomizer a pneumatic, electric, hydraulic, ultrasonic, or other type of device that uses centrifugal force or compressed air under the action of electrostatic repulsion to charge liquid coating material with static electricity and fully atomize it, equipped with high-voltage electrostatic protection measures. 3.4 booth for electrostatic paint spraying a fully or partially enclosed enclosure structure, equipped with adequate mechanical ventilation and lighting, specifically used for electrostatic paint spraying, which prevents the escape of paint mist and solvent vapors and safely directs them into an exhaust filtration system. [Source: GB/T 14441-2024, 6.2.11, modified] 4 General Requirements 4.1 The electrostatic paint spraying area shall include the following scopes: a) The interior of the electrostatic spray booth and the exhaust ducts, and other places where the coating might be directly sprayed; b) The enclosed interior space of the electrostatic paint spraying production line; c) Other areas where flammable or combustible vapors, paint mist, or accumulations of combustible residues may be generated. 4.2 The working area for electrostatic paint spraying and its adjacent locations shall be classified for explosion hazards according to GB 50058. 4.3 Equipment installed and used within the working area for electrostatic paint spraying shall comply with GB 3836.15, GB 50058, and the provisions of Chapter 5 and Chapter 6 of this document. 4.4 The configuration of fire extinguishing equipment in the building housing the working area for electrostatic paint spraying shall comply with GB 50140. 4.5 Electrostatic protection measures within the working area for electrostatic paint spraying shall comply with GB 12158 and the provisions of Chapter 6 of this document. 4.6 Safety signs shall be installed in the working area for electrostatic paint spraying according to GB 2894. 5 Electrostatic Spraying Equipment and Facilities 5.1 Electrostatic Spray Guns Hand-held electrostatic spray guns shall comply with GB 14773. 5.2 High-voltage Electrostatic Generators 5.2.1 A current-limiting safety device shall be provided at the connection point between the high-voltage output of the generator and the high-voltage cable. The shield of the high-voltage cable shall be securely connected to a dedicated ground line. 5.2.2 The power supply for high-voltage electrostatic generators used for painting shall employ explosion-proof terminal devices. The grounding terminal within the terminal device shall be connected to a dedicated ground line. 5.3 Electrodes and Electrostatic Atomizers 5.3.1 Electrodes and electrostatic atomizers shall be securely mounted on bases, brackets, or moving devices and shall have reliable insulation to ground. The insulation resistance shall be greater than 1×10¹⁰ Ω. 5.3.2 When the fixed element is a thin metal wire, the wire shall be tensioned to avoid physical displacement that could cause electrostatic discharge. 5.4 High-voltage Cables and Circuits 5.4.1 Fixed high-voltage cables within the electrostatic spray booth shall be protected by armored cable or conduit. Highly flexible shielded cables with protection against mechanical damage shall be used for frequently moving parts. 5.4.2 The high-voltage circuit shall be designed with safety measures such as overcurrent protection or high-voltage peak protection. 5.5 Automatic Electrostatic Spraying Equipment 5.5.1 The entrance to the spraying area of automatic electrostatic spraying equipment shall be equipped with human-machine safety interlocks and warning lights. When the equipment is operating normally and detects personnel entering the automatic spraying area, the equipment shall stop operation and activate audible and visual alarms.

Contents Foreword III 1 Scope 2 Normative References 3 Terms and Definitions 4 General Requirements 5 Electrostatic Spraying Equipment and Facilities 6 Electrical and Automatic Control Systems 7 Ventilation Systems 8 Storage and Transportation of Coatings 9 Operational and Maintenance Safety Management 10 Verification Methods